Question about E-Machines (308714) Motherboard

2 Answers

T3624 MB someone pulled off the 3 wire pairs to the front bezel. What's the pin out for the 2 leds & power on??

I bought a 'dead' T3624 Emachine at a yard sale. When I opened it the surprise was that the 3 wire pairs to the front bezel & the power cables to the HD & CD had all been pulled off. There's no documentation or indication on the Intel MB as to the pin out for connecting the wire pairs that are labelled PWR LED, HDD LED, & PWR S/W to the 9 pin connector at the lower front on the MB. Anyone know the pin-out or where to find it.
Thanks,
BCinBC

Posted by on

  •  B Sea
    B Sea Sep 20, 2008

    Someone mentioned that the pin out was printed over the board battery & sure enough it was so that solved one clitch. However when I tried to power up, still dead & then I read the threads about the PSUs in Emachines being so-so or worse. Looks like this one failed AND took out the MB as well because I tested the PC by trying another known to be good PSU. So now I'm cruising EBay looking for appropriate parts & pieces. By the way folks thanks for your help, this is a great forum.

    BCinBC

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 95 Answers

According to the internet, your computer has an Intel 845GV chipset motherboard. Intel tends to use a generic pattern for connecting the front panel connectors. A description can be found on intel's site.
If this doesn't solve your problem, comment back with the motherboard model number. Look on the board, it should be printed somewhere, and it should start with D845GV...something something...

Steven

Posted on Sep 17, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 145 Answers

Go to Tiger Direct's website and get you a real mother board.

Posted on Oct 01, 2008

  • butch welch Oct 01, 2008

    Please dont take that wrong. I have two emachines that run 24 hours a day. Mine have beefed up memory, hard drives, sound cards, and vidio cards. I dont think the have been turned off in 3 years.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

N68s3+ panel connection


PANEL1: Front Panel Header for Biostar N68S3+ from

http://www.biostar.com.tw/app/en/mb/introduction.php?S_ID=506#dl

This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and speaker connection. It allows user to connect the PC case's front panel switch functions. Pin #1 has a black square on the motherboard and the pins are oriented from 1-8, left to right, bottom row and 9-16, left to right, top row. You will notice that there is no #11 pin.

pin #'s

1-2-3-4 Speaker (1+, 4-)
5-6 hard drive LED (5+, 6-)
7-8 reset switch (7-, 8+)
9-10-11 N/A (not used)

12-13-14 power LED (12+, 14-) ** only if power wire is 3 port connector **
13-14 power LED (13+, 14-) ** only if power wire is 2 port connector **

15-16 power button (15+, 16-)

Did this solve your problem?

Dec 22, 2012 | PC Chips Motherboards

1 Answer

How to connect panel 1 of n68s3+


PANEL1: Front Panel Header for Biostar N68S3+ from

http://www.biostar.com.tw/app/en/mb/introduction.php?S_ID=506#dl

This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and speaker connection. It allows user to connect the PC case's front panel switch functions. Pin #1 has a black square on the motherboard and the pins are oriented from 1-8, left to right, bottom row and 9-16, left to right, top row. You will notice that there is no #11 pin.

pin #'s

1-2-3-4 Speaker (1+, 4-)
5-6 hard drive LED (5+, 6-)
7-8 reset switch (7-, 8+)
9-10-11 N/A (not used)

12-13-14 power LED (12+, 14-) ** only if power wire is 3 port connector **
13-14 power LED (13+, 14-) ** only if power wire is 2 port connector **

15-16 power button (15+, 16-)

Did this solve your problem?

Dec 22, 2012 | Biostar N68S3+ AM3 NVIDIA MCP68S Micro ATX...

1 Answer

How to connect power switch to mother board


http://www.intel.com/support/motherboards/desktop/dg41rq/sb/CS-029925.htm

Click on -
Intel Desktop Board DG41RQ Product Guide - English (PDF)

Bookmarks menu to the left -

1) Click on the + sign to the left of -
1 Desktop Board Features
Click right on - Desktop Board Components
Or go to Page 11. (Adobe Reader page number box at top)

Front Panel header location marked by P, in the figure.

2) Click on the + sign to the left of -
Connecting to the Internal Headers and Connectors,
in the Bookmarks menu.

Click on - Front Panel header

Motherboard mounted in computer case, the Front Panel header is in the bottom/right corner, above the top black SATA connector.
Two rows of contact pins.

The Top row is numbered EVEN.
Starting at the Left side going across to the Right, Top row;
Pins 2, 4, 6, and 8. There is NO pin 10.

The Bottom row is numbered ODD.
Starting at the Left side going across to the Right, Bottom row;
Pins 1, 3, 5, 7, and 9.

A) Pins 1 and 3 are for the HarDDrive activity LED. (Light)
Pin 1 is for the Positive wire.
If the HDD LED is dim when the harddrive is active, switch the wires around.

B) Pins 5 and 7 are for a Reset switch, IF a Reset switch is used.

C) Pin 9 is N/C. Not Connected. Probably 5 Volts DC for factory testing.

D) Pins 2 and 4 are for the Power On LED. (Light)
This IS for a -> 2 wire LED. (Light)
Pin 2 is for the Positive wire.
If the PWR LED is dim when the computer is on, switch the wires around.

E) Pins 6 and 8 are for the Power On switch.

To the left of the Front Panel header is a 3-pin header.
This is the Alternate Front Panel LED header.
If you have a -> 3-wire LED, it connects here.

Also wanted you to have the motherboard manual.

Regards,
joecoolvette

Nov 04, 2012 | Intel DG41RQ Motherboard & Core 2 Duo...

1 Answer

Manual for 41t-ad motherboard


http://www.skyline-eng.com/index.cfm?fuseaction=product.display&Product_ID=8665

Bottom/Right corner of motherboard - Front Panel header. Take an LED with two wires on it, and touch pairs of pins. ( 2 )
When you briefly touch the 2 pins that turn it on, you have the Power On switch wires.

Do not touch these pins again, and test the rest of the pins.
LED stays on? You have the Power ON LED pins.
LED blinks? You have the HarDDrive activity LED.
Computer restarts? Restart switch pins.
Some pins do nothing, 4 in a row may be for speaker, some pins have +5 volts, and are not used either. (Factory use)

Regards,
joecoolvette

Sep 05, 2012 | Motherboards

1 Answer

MSI 760gm-p21(fx) MB, JFP1 AND JFP2 PINOUTS I NEED TO SEE A DIAGRAM SHOWING ME EXACTLY WHERE TO PLUG the cables on the MB


http://www.msi.com/product/mb/760GM-P21--FX-.html

Hover your mouse cursor on the Download tab.
(Overview/ Specification/ Download/ Support/ Where to Buy)

In the drop down list click on - Manual
On this page under the subheading Download, click on the blue -
M7641v3.0.zip
On the next page click on the country name nearest yours.

Motherboard User Manual.

This is a Zip file. If you do not know how to open a Zip file, please state in a Comment, and I will guide you.

The front of your computer is the Front Panel.
The area of contact pins on the motherboard, that the main wires from the Front Panel go to, is the Front Panel header.

The Front Panel header is divided into two headers on the motherboard.
This you have stated, JFP1 and JFP2.
(Junction Front Panel 1, and Junction Front Panel 2)

JFP1 is for the Power On switch, HarDDrive activity LED, Reset Switch, and a two wire Power On LED.

JFP2 is for an internal speaker/buzzer, and a three wire Power On LED. (Dual color)

JFP1:
4 pins across the Top row.
5 pins across the Bottom row.

The pins on the Top row are numbered EVEN.
The pins on the Bottom row are numbered ODD.

Starting on the LEFT side coming across to the Right side, Top row;
Pins 2, 4, 6, and 8. There is NO pin 10.

Starting on the LEFT side coming across to the Right, Bottom row;
Pins 1, 3, 5, 7, and 9.

A) Pins 1 and 3 are for the HarDDrive activity LED.
Pin 1 is for the Positive ( + ) wire.
If the HDD LED is dim when the Harddrive is active, switch the wires around.

B) Pins 5 and 7 are for a Reset switch, IF a Reset switch is used.

C) Pin 9 is N/C. Not Connected. It is reserved for the factory to use.

D) Pins 2 and 4 are for a two wire Power On LED.
Pin 2 is for the Positive ( + ) wire.
If the PWR ON LED is dim when the computer is on, switch the wires around.

E) Pins 6 and 8 are for the Power On switch.
F) There is NO pin 10.

JFP2:
4 pins across the Top row.
3 pins across the Bottom row.

The pins on the Top row are numbered EVEN.
The pins on the Bottom row are numbered ODD.

Starting on the LEFT side coming across to the Right, Top row;
Pins 2, 4, 6, and 8.

Starting on the LEFT side coming across to the Right, Bottom row;
Pins 1, 3, and 5. There is NO pin 7.

A) Pins 1, 3 and 5 are for a dual color Power On LED.

Pin 1 is for the Negative ( - ) wire.
Pin 2 is for a Yellow, or Orange part of the dual color Power On LED.
Pin 3 is for a Green part of a dual color Power On LED.

B) Pins 2, 4, 6, and 8, are for a speaker/buzzer.

Pin 2 is for the Negative ( - ) wire of a speaker.
Pin 8 is for the Positive ( + ) wire of a speaker.

Pin 4 is for the Positive ( + ) wire of a buzzer.
Pin 6 is for the Negative ( - ) wire of a buzzer.

For additional questions please post in a Comment.
Regards,
joecoolvette

Jul 28, 2012 | MSI Motherboards

1 Answer

I am looking for MCP61PM-HM (Nettle) 9 pin front panel power header diagram


This motherboard Adam?

http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c00906137

Can't help you.









OH, I'm just KIDDING!

The front of your computer is the Front Panel.
The area of pins on the motherboard, that the main wires from the Front Panel go to, is the Front Panel header.

On the motherboard the Front Panel header is marked as PANEL1.
Scroll the page down, until you come to Motherboard layout.
Click on the + sign to the left of it.

Shows an illustration of the motherboard.
Bottom/Right corner is PANEL1. The black rectangle that is sitting vertically, in the motherboard photo.

Motherboard installed in computer case, the Front Panel header is two columns of contact pins.
FOUR on the Right side, FIVE on the Left side.

I don't know the actual numbering of the pins, so I'm going to number them myself;

Starting on the Left side at the Top, going down,
Pins 1, 3, 5, 7, and 9.

Starting on the Right side at the Top, going down,
Pins 2, 4, 6, and 8. There is NO Pin 10.

A) Pins 1 and 3 are for the HarDDrive activity LED (Light)
Pin 1 is for the Positive ( + ) wire.
If the HDD LED is dim when the harddrive is active, switch the wires around.

B) Pins 5 and 7 are for a Reset switch, IF a Reset switch is used. If not, do not connect to them.

C) Pin 9 is N/C. Not Connected. It was a +5 Volt power for the factory.

D) Pins 2 and 4 are for the Power On LED (Light)
Pin 2 is for the Positive ( + ) wire.
If the Power On LED is dim when the computer is on, switch the wires around.

E) Pins 6 and 8 are for the Power On switch.

F) NO pin 10, just a blank spot.

How to find out what wires are what, in that Front Panel harness connector?

Follow the wires from the connector, up to the Front Panel.

Front Panel removed it is easier to see where the wires go.
You can follow the color code of the wires, and see which twisted pair go up to the Power On switch.

You can also see which ones go to the Power On LED.
(Light Emitting Diode, so it is a light)

Reset switch, (IF there is one), same thing.

The only pair of wires that will be left is the HDD LED wires.
HarDDrive activity LED.

The 9-pin plug will have to be CAREFULLY cut apart. Separate the wires, AND their metal terminals. (WATCH your fingers!)

For additional questions please post in a Comment.
Regards,
joecoolvette

Jul 04, 2012 | Gateway MCP61PM-GM (4006254R) Motherboard

1 Answer

I have motherboard Compaq #277498-001 and can't find power sw


Not sure of your particular MB, but most always the switch is a pair of pins in an array where the front panel LEDs and reset and power switch are.
This array of pins is almost always at the lower right hand side of MB. Assume the components side is facing you and the expansion slots are at your left hand, (where you add extra cards like video etc). then look at the lower right side or bottom edge, mostly right at the edge of the board. Should be an a double row of pins, at least 8 maybe up to 12. Look real close next to these and you may see print indicating which pair do what. PS = power switch. RS = reset, HD = Hard drive LED PLED = power led light.Spk internal beep speaker etc. (Note LEDs require correct polarity to work) Sometimes no print there.. Then you need the manual to decipher pin pairs. Or experiment. All you need to do is make the connection momentarily (like push button) with a small screw driver tip to start it, while looking for correct pins.
If no power on check your power supply connections on the MB. Or suspect either MB or Power supply issue.

Mar 24, 2012 | Compaq ( 277498-001) Motherboard

1 Answer

Connecting front panel wiring to INTEL 845GRG Motherboard


Hello davideiker1, the Intel D845GRG MB manual is shared with another Intel board. (D845GBV MB). Go to this Intel site & download the D845GRG manual; http://support.intel.com/support/motherboards/desktop/d845grg/sb/cs-008873.htm You'll need Adobe reader to view the manual. Download Adobe from this link; http://www.adobe.com/products/reader/
See page 9 for motherboard layout.
The front panel connectors are shown on page 68, see item C.
On page 69 is, Table 31 shows the pin assignments for the front panel header. Front Panel Header (J9G1).
Pin 1 is power for the hard disk drive led, pin-3 is negative for the hard disk drive. Wire colors coming from the case are important. Look at all of the front case wires. The common color for each 2-pin connector will be ground. In most cases the ground wire is white, except for the internal speaker. Ground for the speaker is normally black. (This motherboards speaker is built into the MB, no hook up is needed).
Pin number 2 is positive for the case power led which lights up as green. Pin 4 is negative for the power led.
The reset switch is a bit different. Pin 5 is negative & pin 9 is positive, however if your case uses a two pin connector than connect pin 7 as ground & pin 9 for positive. The On/Off switch, pin 6 is positive & pin 8 is negative.
If this manual is not what you see on the MB, please advise.

Good luck davideiker1!
Need more information/questions post here.
Thank you for using FixYa.
Input, comments are welcomed.
Mike

Jan 22, 2009 | EliteGroup P6SET-ML Motherboard

1 Answer

Emachine model W2888, wiring


this is someone more suited for a trained technician, but you can look at the motherboard, where the pins were, and you should see markings like pwr +, pwr -, led +, led -, hdd_led, etc, you will also see markings on the cords that connect to the motherboard, with the same words, pwr+, pwr-, etc, you can try matching those up..

Jan 20, 2009 | Gigabyte GA-8IE533 Motherboard

7 Answers

Emachine T2742 MB D845EPI/D845GVSR


The diagram for that 9 pin J9G1 is alongside the CMOS battery.

Dec 25, 2007 | Intel Desktop Board D845EPIL Motherboard

Not finding what you are looking for?
E-Machines (308714) Motherboard Logo

502 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines Motherboards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

patrick_j950

Level 1 Expert

29 Answers

Are you an E-Machines Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...