I recently have my car repaired and the stereo system was detached from where it was installed. after the car's repair i tried to re install my car stereo but can not find the installation wiring diagram, can you help me on this?
If you have a wire harness from the original install then they are 99% of the time just color coded or you can order a replacement manual from there website http://parts.pioneerelectronics.com/model.asp?modelNum=KEH2200QR
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
heres the wiring for your car radio
Car Radio Battery Constant 12v+ Wire: Blue/Red Car Radio Accessory Switched 12v+ Wire: Blue/White Car Radio Ground Wire: Chassis Car Radio Illumination Wire: Red/Black Car Stereo Dimmer Wire: N/A Car Stereo Antenna Trigger Wire: N/A Car Stereo Amp Trigger Wire: N/A Car Stereo Amplifier Location: N/A Car Audio Front Speakers Size: 5′ x 7′ Car Audio Front Speakers Location: Doors Left Front Speaker Positive Wire (+): Blue Left Front Speaker Negative Wire (-): Blue/White Right Front Speaker Positive Wire (+): Blue/Red Right Front Speaker Negative Wire (-): Blue/Yellow Car Audio Rear Speakers Size: 5′ x 7′ Car Audio Rear Speakers Location: Rear Deck Left Rear Speaker Positive Wire (+): Blue/Red Left Rear Speaker Negative Wire (-): Blue/Green Right Rear Speaker Positive Wire (+): Blue/White Right Rear Speaker Negative Wire (-): Blue/Greenand here is the link for your radio install http://www.pioneerusa.com/StaticFiles/Manuals/Car/DEH-P4200UB_InstallationManual1006.pdf
You have to first diffentiate the power from the speakers. The ORANGE, RED and BLACK are the power. Connect the RED to continuous supply of the battery which is available in the accessories socket, the Orange to the switched power which is also available in this socket. The Black should be connected to the best ground available, check all these using a good meter. Next greys, the greens, one with the red mark on the wire to be connected to the positive of the speaker , the black mark to the negative. repeat this for allthe other wires and test. Now if you think that on balancing to one side the bass is better, reverse one side of the polarity of the speaker.can be the front speakers or the rear. I think you can get this right. Good day
Depends on the type of car you have. Do you have a harness or are you going to splice all the wires? Does your car have a premium sound system? Are you going to run an amplifier now or later on in the future??