Question about Miele Washing Machines

Open Question

Miele w906 red light flashing after wash cycle machine then stops

Posted by on

6 Suggested Answers

  • 183 Answers

SOURCE: The washing machine wont start

This indicates either a faulty inlet valve, afaulty pump or a blocked filter Regards Engineer

Posted on Jul 30, 2007

  • 14 Answers

SOURCE: Miele Premier novo washing machine

Faulty cold inet valve most likely the problem or cold tap off Good luck

Posted on Sep 14, 2007

Mark Harmer
  • 8 Answers

SOURCE: Inlet blockage red light flashing

Try turning the machine on its side, undo the bottom and check that the polystyrene float (attached to a switch) is not somehow jammed. This float cuts off the water if the machine leaks internally, and produces the symptoms you describe. It's a really good machine so don't throw it away!!

If that still doesn't help then it might also be the motor brushes, which produce similar symptoms - if your machine starts to fill but then flashes and just drains again, it's almost certainly the brushes. This might be the case after you check the float problem.

Posted on Sep 21, 2009

  • 1 Answer

SOURCE: bosch washing machine flashing red lights

all lights are flashing on bosch classixx express no thinh working no water intake door is locked what is the problem and can i do it myself

Posted on Jan 07, 2010

  • 70 Answers

SOURCE: miele premier novo, the main wash light flashing

Hi
Main wash is a fault indicator. The is a problem within the heater circuit, NTC, element, relay or loose wire. You will have to open front and check.
Remove 3 screw around dispenser and 3 10mm bolt around door. disconnect hose by drain pump and front of machine will open like a door.

Posted on Apr 01, 2010

Testimonial: "thanks, you confirmed what we sort of expected"

  • 1 Answer

SOURCE: Bosch classixx 1000 washing machine - stops on spin

Thre washing machine is stopping on rince, the light is flashing. we press start again and it goes through the same routine till it hit rinces and stops. the clothes are still full of water, we have to move the dial to rince and freshen up to finish the wash. any ideas..?

Posted on Jun 16, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Our miele w911 washing machine keeps stopping in the main wash cycle - red light above the tap symbol. What does it mean?


check that the water flow solenoid is operational and not blocking of the spray rinse requriement

Mar 23, 2015 | Miele Washing Machines

1 Answer

MIELE W412 PREWASH INDICATOR FLASHING


If your PreWash is flashing then you have a pressure problem. You can dry using a washer machine cleaner or doing a hot cycle with white vinegar. If that doesn't help the electronic would have to be changed.

Jan 08, 2012 | Miele W412 Front Load Washer

1 Answer

Premier w500 the rinse light flashes rapidly and the cycle stops. Any thoughts?


Hi just wondering if you got your problem with your miele sorted out yet as mine has done the exact same thing. Rinse light flashing rapidly and cycle stoped. Have cleaned the filter and re started but no joy.Any luck?

Jan 09, 2011 | Miele Novotronic Premier 500 Front Load...

1 Answer

I'm looking for a service manual for Miele WS 5425 washing machine, any ideas where i can obtain one?


i have a Miele ws 5425. it wil not open even though though the cycle has finished. It still full of water. The red fault light flashes on the drain symbol.

Jun 17, 2010 | Miele Washing Machines

1 Answer

Red light flashing


red light is check drain?
Clogged by something.
Could be a coin.
Use to have large coin when i was young and forgot remove from my jeans. So mum made me repair that every time. In that case filter clean, but coin bloking filter inlet.
Not necesarily coin in your case.
never buy these deals over Ebay my advice.
If you have the machine already then this is first to look for.

Nov 16, 2008 | Miele W310 Front Load Washer

1 Answer

Miele rinse light keeps flashing


did you check the DRAIN PUMP MOTOR ? IT COULD BE CLOGGED or something blocking the impellers

Apr 19, 2008 | Washing Machines

1 Answer

Miele washing machine


All Miele washing machines and dishwashers need to fill in a required time. Flashing inlet (Tap icon) indicates that the machine can not fill in time. There are filters in the end of the hoses which connect to your water supply from the machine and filters in the inlet valves which you can get at by removing the hose from where it fixes onto the machine it'self. You will need some long nose pliers to grab the little tab on the small filter to get it out. Clean all filters and hoses. Still same problem then check the pressure of the water coming into the machine. There should be a good pressure coming out of the hose and will be difficult to stop the flow of water with your finger.

Dec 20, 2007 | Miele Novotronic Premier 500 Front Load...

Not finding what you are looking for?

Open Questions:

Washing Machines Logo

Related Topics:

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Miele Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Miele Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...