Question about Washing Machines

Open Question

I have a Hitachi SF-65PX washing machine and it keeps beeping throught the cycle and doesn't seem to complete the cycles. I'm wondering if the control panel is the problem as the plastic around the buttons have corroded??

Posted by on

3 Suggested Answers

  • 713 Answers

SOURCE: Hitachi SF-65PX Washing Machine

Hi just read your posting.As I understand from your posting, the center spline on your pulsator is stripped and you would like to replace only the center spline instead of the whole pulsator.Is this correct?Are you in Australia?If so then reply back and I can give you some contact details on where to obtain a pulsator from.I dont think you can buy just the center piece only the whole pusator.There are places that sell the pulsators secondhand which will save you some money.Please reply with additional information and I am sure I can help you further.Looking forward to your reply.

Posted on Jul 25, 2010

blueextc3221
  • 15935 Answers

SOURCE: star rating?

2.5



Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 16, 2010

dc7157647
  • 1 Answer

SOURCE: Hitachi SF-65PX Washing Machine

I'm also looking for a Pulsator for the same Hitachi model SF-65PX Washing Machine. The centre spline on mine is also stripped. Do you have an Australian seller?

Posted on Oct 31, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is there an 'SF' code showing and continuous beeping from our Simpson encore 756


there are different sf codes for different faults. try googling the sf number fault to find problem.

May 25, 2014 | Washing Machines

1 Answer

Hitachi sf-6500px error


Possible error on the program due to a memory issue. After resetting, if the machine has the same fault with all the selected programs, then it is possible that the motherboard is faulty. Please check the INLET flow to be good and the drain pump to be clear.

Jun 25, 2013 | Washing Machines

2 Answers

Hitachi SF-65PX Washing Machine


Hi just read your posting.As I understand from your posting, the center spline on your pulsator is stripped and you would like to replace only the center spline instead of the whole pulsator.Is this correct?Are you in Australia?If so then reply back and I can give you some contact details on where to obtain a pulsator from.I dont think you can buy just the center piece only the whole pusator.There are places that sell the pulsators secondhand which will save you some money.Please reply with additional information and I am sure I can help you further.Looking forward to your reply.

Jul 24, 2010 | Washing Machines

1 Answer

Beep's incessantly after cycle is complete. How can we re-program it to turn off after one or two beeps?


Hello, welcome to fixya.

To Enable or Disable the Cycle Completion Signal...

1. Open the door, hold down the “Quick Wash”
button and simultaneously turn the Dishwasher on.
The “Quick Wash” light will blink (program mode).

2. While the light is still blinking, push the “Quick
Wash” button.
• If the machine beeps, then the Cycle
Completion Signal has been enabled.
• When you push the button again and it
doesn’t beep, it means that the Cycle
Completion Signal has been disabled.

3. Turn the Dishwasher off to take it out of
program mode.

I hope this answer's your question. Thank you for choosing "fixya".

Please rate the solution favorably if indeed it was helpful, if not please let me know.

Good luck.

macmarkus :)

Jun 28, 2010 | Bosch SHU9915UC Dishwasher

1 Answer

I need an operating manual for a Hitachi SF-65PX Top load Washing Machine


Hitachi recommends that you contact them for copies of their product guides that arent avaiable on their website for download (which it seems your washing machine is one)

see below

http://www.hitachi.ae/products/consumer/customersupport/productmanuals.html

May 16, 2010 | Sprint Hitachi P300 Cellular Phone

1 Answer

Star rating?


2.5



Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Apr 04, 2009 | Washing Machines

1 Answer

F & P washing machine GW709AU not competing rinse cycle and then beeps and flashes light.


My Whirlpool washing machine is not stopping after completion of wash cycle instead it is repeating the cycle again. It is not consistent, but out of 3 washes 1 wash is happening that way...we are manually stopping machine by gaurding carefully when timer shows nearer to completion.

Sep 15, 2008 | Washing Machines

1 Answer

End of Cycle signal keeps beeping


Try pressing "rinse" + "pre-wash" buttons together for over 5 seconds. It will lock. Repeat again for 5 seconds, it will unlock.

Nov 07, 2007 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Washer keeps beeping


HATE TO SAY IT BUT THE BOARD WOULD NEED REPLACEMENT.BEEPING NORMALLY INDICATES A FAULT CONDITION WHICH WOULD STOP THE CYCLE(WASH) OR THE COMPLETION OF A CYCLE.

Jun 17, 2007 | Whirlpool Duet GHW9150P Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

203 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

yadayada
yadayada

Level 3 Expert

71338 Answers

Brad Brown

Level 3 Expert

15220 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...