Question about Wave Industries OLY-OL3000 Globe Phone
OLY-OL3000 Globe Caller ID BLUE Phone need Repair. Dropped on the floor and now LCD won't come on.
All programing functions are controlled on the main (stationary) board. All display functions are controlled on the Rotor (spinning board.) Here are some steps to take if you are having display problems. Remove the three mounting screws that hold the rotor to the motor shaft. The LED display board is attached perpendicular to the rotor board and is soldered to the rotor board. Over time, the connections break due to the centrifugal force of the spinning rotor. CAREFULLY, with a low amp solder iron and a fine tip, re-heat the board to the display. That should solve the problem. If you were a bit sloppy with the solder, remove the solder with a fine wick and try again!
Posted on Oct 01, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Apr 27, 2011 | Wave Industries OLY-OL3000 Globe Phone
Jan 15, 2011 | Wave Industries OLY-OL3000 Globe Phone
Oct 13, 2010 | Wave Industries OLY-OL3000 Globe Phone
Jan 19, 2009 | Wave Industries OLY-OL3000 Globe Phone
Aug 05, 2008 | Olympia InfoGlobe Caller ID
Jul 18, 2008 | Wave Industries OLY-OL3000 Globe Phone
Jul 09, 2008 | Wave Industries OLY-OL3000 Globe Phone
Sep 21, 2010 | Wave Industries OLY-OL3000 Globe Phone
336 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: