Question about Mitsubishi WT-42313 42" Rear Projection HDTV-Ready Television

2 Answers

Mitsubishi WT-42313 42 in. rear projection tv

Red and green vertical lines on left side of screen causing red and green ghost type effect. It started last night and stayed that way for about 30 minutes then stopped for about 45 minutes before I turned off the tv and went to bed . I tried it today and it has been playing fine foe about 30 minutes.

Posted by on

  • 1 more comment 
  • Anonymous Nov 28, 2008

    hitting lightly on the top left front corner makes it go away for a while but usually gets worse... i have the same issue

  • Anonymous Mar 10, 2009

    I had the same ghost like issues. I opened up tv cabinet in back and turned down the red screen adjustment.

  • badgered Mar 10, 2009

    Having red ghosting on the left side only. Was only for a short time, now it is all the time. What is the cause and fix?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I guess I have to pay money for a solution, which is not what this website says. The only answer I got was pay money and we'll tell you. Is that true/

Posted on Sep 18, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Red and green vertical lines on left side of screen causing red and green ghost type effect. It started last night and stayed that way for about 30 minutes then stopped for about 45 minutes before I turned off the tv and went to bed . I tried it today and it has been playing...

Posted on Sep 27, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tv gets a red and green shadow on the left side after being on.


convergence solder connections likely going bad. you may be able to resolder or just replace the chips.
check my tutorial and let me know if you need more help.
http://www.fixya.com/support/r5001731-convergence_diagnosing_convergence

Jun 05, 2010 | Mitsubishi WT-42313 42" Rear Projection...

1 Answer

Redness in picture


The Convergence amps in this TV set will need to be replaced. This is a typical repair that has to be repaired in almost every tube type projection TV set ever made. Not really a hard job, but a knowledge of printed circuit boards and soldering will be needed and if you do not have the soldering and unsoldering skills, leave the repair to a pro. A repair such as this will run anywhere from 225 up yp 400 bucks. Good Luck and let us know how this repair worked out for you.

Dec 08, 2007 | Mitsubishi WT-42313 42" Rear Projection...

1 Answer

Mitsubishi WT-42413 Blue Green and Red Line


there is a section in the tv working just to keep the screen fitting top to down (vertical section) some capacitors are dry now in that area. this one has not to be a expensive job in the workshop. Try estimates

Apr 14, 2009 | Mitsubishi WT-42413 42" Rear Projection...

1 Answer

Covergence out of alignment on 1/4 Vertical left side of screen


You need to manually adjust the alignment:
On remote, press Menu to get to the main menu
Then arrow down to "ADVANCED FEATURES"
Then press "enter"
Then Arrow down to "CONVERGENCE" and press "enter"
"Red Convergence" should be highlighted
Press "enter"
You now have Green, Red, and Blue overlapping crosses.
If Red is out of whack, use arrows to align
To toggle to blue (and back to red), press "VIDEO"
Then align blue cross
Once the crosses look aligned, and nice and white, press "AUDIO"
This will bring up the Advanced Convergence screen
This is a grid of the same overlapping colors
You have control over the Red and Blue
If Green is very out of whack, you'll need a repairman…
While the "target" is flashing, you can move it around the screen with the arrows
Place it over an intersection to adjust, then press "enter"
Now the "target" is steady (not flashing), and you can use the arrows move your color
When it's aligned, press "enter" again
Now "target is flashing, and you can go to the next square.
You cannot adjust every intersection.
Some areas need to be adjusted via the adjacent intersection
When you're happy with color you're working on,
Press "video" while target is flashing to change to the other color
Repeat the above (blue is much harder to see and adjust for me…)
When you're happy with the entire grid, start hitting "Menu"
Each press brings you back out one menu level, until you are out of them
Once you're used to the process, it should take no more than a minute or two.

Mar 02, 2009 | Mitsubishi WT-46805 46" Rear Projection...

1 Answer

Convergence


you need to replace both convergence ICs they are STK392-110 you can get replacements at the following link with free installation instructions so you can do the repair yourself.
http://servicemanuals.vstore.ca/

Aug 23, 2008 | Mitsubishi WT-42311 42" Rear Projection...

1 Answer

Mitsubishi rear projection tv


replace vertical IC and shadows/ghosting the problem is either electrolytic capcitor or video IC or convergence adjustment

Aug 18, 2008 | Mitsubishi WS-65809 65" Rear Projection...

2 Answers

Redness in PIcture


This is a failure for the convergence amps.. Replace both STK392-110 amps using STK392-150's instead for greater reliability and then re-converge..
If you're taking this to a shop to have it done it's not that expensive of a repair - but make sure you get your estimate in writing and make sure you relate to the tech that you want the 150's instead of the 110's...
Have a great day!
Bill

Dec 08, 2007 | Mitsubishi WT-42313 42" Rear Projection...

2 Answers

Red convergence will not adjust.


Replace STK393-570 convergence amp IC = common repair
for qualified Mits tech............................T.

Nov 09, 2007 | Mitsubishi WT-42413 42" Rear Projection...

1 Answer

Red tint on the entire picture


Always try your extended warranty!.....Probable cause = bad
red tube. One adjustment may help---turn down red screen
control, located behind technician access panel in front of set.

Nov 04, 2007 | Mitsubishi WT-42311 42" Rear Projection...

Not finding what you are looking for?
Mitsubishi WT-42313 42" Rear Projection HDTV-Ready Television Logo

329 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1207 Answers

The Knight
The Knight

Level 3 Expert

73118 Answers

Jaime Hernandez

Level 3 Expert

2307 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...