How do i get a motherboard of kitchenaid, mine was demeged couse i conected it to 220v

Is it possible you've blown a breaker? Probably a double-breaker, 220V.

Hello there,

We do provide a conversion kit to assist you with your job. Please see below the link for your perusal:

KSM150CONVUK KitchenAid Conversion Kit for KSM150 to 220v/230v/240v with UK Plug https://secure.kaparts.co.uk/sku/KSM150CONVUK

Circut board of the motor is demeged.if you take out the board witch is next to the moyoryou will see on the electronic print
The demeg.

chek conecters may b these demeg

We had the same problem with the dryer a month ago. They had to replace the motherboard.

Call your service contractor.

All you can do is troubleshoot and isolate to identify failure(s). Start with the power supply, by using a voltmeter. Hopefully the fault lies there and you won't have to go on.

It's perfectly save to use a power converter from 220v to 110V. The 50Hz Frequenz will let the Motor spin 20% slower. So it'll last forever. I use a KSM90 from the US in Germany for more than 25 years. It runs great and the gears inside it look like new.

your power supply is shorted.. make sure to connect your new power supply to the actual voltage .. 220V is for 220V input PSU.... if you connect your 110V PSU to 220V outlet... it will fry your power supply..

Kitchenaid mixers are not recommended on the use of a converter as they are not tested under such conditions. Understanding this, using a convertor on your mixer may automatically void the 1 year warranty regardless of age.

There are international Kitchenaid dealers available if you are requiring 110V. You may contacted Kitchenaid Customer Service for more information.

Their toll-free telephone number is 1-800-541-6390.

DO NOT DO IT. The Hz will destroy the morotr. The transofrmer only converts the voltage. You are better off buying a 220V version.