Question about Projection Televisions

1 Answer

I have a 20" LCD television, Model #20MF605/T17, Part No. 313819876631 for a power cord/adapter. I have nothing to plug this TV into electricity. Where can I buy one? How much? I live in Deer Park, TX 77536 which is southeast suburb of Houston, TX

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 44 Answers

E-bay and Vance Baldwin have substitutes for that.

Posted on Dec 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does it have a USB port to connect a Ruko stick? If not, how can I connect it?


The KDF-42WE655 does not have a USB port. The current Roku sticks plug into the HDMI port on the TV. You will need to use the power adapter that came with the unit. Plug the USB cord (mini or micro USB) into the back (or side) of the Roku Stick and then plug the power adapter into a nearby power outlet. (It's a 5V 1A DC power adapter.) Roku sells this adapter separately on their Accessories page: https://www.roku.com/accessories . It's ~$10. If you have mounted your TV such that the power outlet is hidden behind the TV, you'll get to the outlet or use another nearby outlet. (Make sure to avoid a tripping hazard if you use an extension cord or power strip to increase the number of available outlets.)

I hope this helps.

Cindy Wells

Jul 26, 2015 | Sony Grand WEGA KDF-42WE655 42" Rear...

1 Answer

We have lost the power cord to plug into our Proscan TV model: PS52652 chassis: PTK169PDBS. where can we find a cord to purchase?


Check with techs that repair these sets or any tech. If they cant find the right power cord they can allways take the power cord from another name brand set and wire it in.

Aug 05, 2010 | Proscan PS52650 52" Rear Projection...

1 Answer

Its take a long time to start the tv.no display in the lcd.what is the problem in this tv?


probably short on power or there is a damaged cord in the plug. Do you hear any sound? If so, the LCD of the TV is the problem. Have it fixed if the warranty is still available and not expired.

Jun 20, 2009 | Panasonic PT-50LC14 50" Rear Projection...

1 Answer

No sign of power on my Phillips Magnavox rear projection TV


try replacing the fuse. it should be behind the bottom panel near the power cord

Nov 17, 2008 | Projection Televisions

1 Answer

Emerson LCD 32" TV....Model # LC320EM82....Power problem, powers up and powers right back off almost instantly....i have tried to google a solution and so many people are having the same solution but...


Okay!First i need to isolate your electrical outlet is working. Use another Video/Audio component(ex. dvd player) and plug the power cord into the TV outlet,be sure it has nothing to do with the outlet.
If the outlet is working properly,Unplug the TV power cord and wait for 1 minute before you plug it back in the outlet.Turn on the TV MANUALLY without the remote control and see if the power stays on,if not,sorry,you need it to be repair.Don't waste more time on it. If you only purchase it for few months with a reputation retailer,there is no reason NOT to call them up,cause it should be still under warranty?
solutiondoct

Nov 10, 2008 | Projection Televisions

1 Answer

Green and purple ghosts


Try to reset first if nothing happens we proceed another solution;

Resetting the TV

Some TVs have a reset button. If available and accessible, try using the reset buttons before using the steps below. Using the reset buttons can saved time.
1. Unplug the TV power cord from the power outlet for 3 - 4 hours.
2. Unplug any connected devices (DVD, Set-top boxes, etc...)
3. Press and hold the TV power button for five seconds.
4. Plug the TV power cord back into the power outlet and turn on the TV.
5. Open the on-screen menu to confirm that the TV is responding again.
6. Turn off the TV and reconnect the devices.
7. Turn on the TV.

hope this may help;

Regards,
VOTIT

Oct 09, 2008 | Panasonic PT-47X54 47" Rear Projection...

3 Answers

Power supply for dmtech wt20xt lcd tv


I have DMtech 20" with intergrated DVD and had the same problem- blue light lit on power switch but no response on power up.
I noticed that when the power cord was unplugged from the back of the TV the green LED on the power supply would brighten and consequently dim when plugged back in. Sometimes the blue light on the power switch would strobe very quickly but you had to look carfully for this.
I repeatedly unplugged the DIN type power plug from the back of the TV untill the green light on the power supply stayed a constant bright and there was no strobing on the blue light on the front of the TV, when I powered the TV on at this point the button worked again and the tv powered up with the silly tune then life in the screen. I did have to do this a good few times (I'm tenacious) but it did work!!!!!
Hope this helps someone else, cheers.

Apr 11, 2008 | Projection Televisions

2 Answers

TV power problem


Does anything else work in the same outlet?
Also do you have it plugged into a power strip?
Unplug it wait about 20 - 30 seconds and plug it back in see if it resets its self

Jan 02, 2008 | Philips Magnavox 51MP392H Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...