Can anyone fill me in (in detail) on how to replace my front wheel bearings in my 2000 xterra? its 4 wheel drive and both fronts are bad.. also i cant figure the size of the caliper bolts out so that info would b much apreciated too..
Re: Can anyone fill me in (in detail) on how to replace...
Hit up www.nicoclub.com/FSM/xterra/2000/ That's the factory service manual which will provide detailed information. There's an inner and outer bearing on each side
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
does it get louder above 45-60mph? and much quieter at low speeds. It could be wheel bearings, a rear differential or front differential. If its a grinding humming noise its wheel bearings, listenin to see if theyre coming from the front or rear, left or right, or both when your driving to know what wheel bearing are bad. If its a whinning noise, its probably a differential. check and listen to hear if its coming from the front or rear. Also, check for loose plastic around the wheels. Lastly check your tires for uneven or choppy wear. move your hands front to back on the top of the tire. does it feel really choppy and rough, maybe you just need new tires
simple just remove the Allen screws and snap ring at the end of the axle spin out the bearing retaining nut and its out.then unbolt it from the hub and reinstall the new one easy.
yes this is caused by the transfer case which is the heart of the 4 wheel drive system, have the fluid changed in the transfer case, drive it a few days and see if problem clears, if not the transfer case will need to be ovehauled.
×