Question about Nikon FE 35mm SLR Camera

1 Answer

How to load film.

My instruction manual doesn't give me clear directions on how to put the film in correctly. can you please help me

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 200 Answers

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Nikon FM3 and the shutter opens at the correct speeds but when I put B&W film in it (Kodak TX 400) and develope the film, there is nothing on the film like it was brand new. Help please.


Check to make sure that the film is properly inserted into the take-up spool, and watch the rewind knob and make sure it is turning indicating that the film is going through the camera. Also check to make sure that the multi-exposure lever isn't stuck in the on position by spillage or impact so the camera just keeps taking exposure on one frame and the film doesn't move.

Sep 29, 2012 | Nikon F3 35mm Film Camera

1 Answer

There is no instruction on how to load film please help


You can download a copy of the manual from
http://butkus.org/chinon/vivitar_cameras/vivitar_v3800n/vivitar_v3800n.htm

The film-loading instructions begin on page 2.

Feb 11, 2011 | Vivitar V3800N Zoom 35mm SLR Camera

2 Answers

How do you re-load it?


Open the back with the side latch, pull the header of your film out of the roll, insert that into the slot on the roller spindle far enough for it to wrap once, close the back of the camera, and then power it up. It will start to wind to the first photo segment by itself. If it doesn;t the film was not inserted far enough into the spindle.

May 20, 2010 | Minolta Maxxum 7000 35mm SLR Camera

1 Answer

Wont turn on


Hello,
I assumed that you loaded a fresh battery set and with correct polarity ,otherwise it does give such signal.
If you have the user manual,please check the other alternatives on trouble shooting section.
If you do not have a user manual you can visit the site below where instruction manual copies for Pentax,
www.pentax-manuals.com

It's not an official site, but the manuals for downloading are better quality copies and in color
where possible: and they have the MZ30 too.
Regards

Mar 16, 2010 | Pentax MZ-30 Film Camera

1 Answer

My x 370 wont transfer pictures onto the film? The camera looks like it's in good condition. The roles come out blank!


Film cameras directly expose film to light to produce an image: they do not "transfer pictures onto the film", but your phrase is a big clue as it suggests you've only used digital cameras in the past and so may have made a very simple mistake with film loading.

If the film is blank as in transparent, then the film has not been exposed. If it's completely dark then it's been over exposed.

I suspect you mean that the film is unexposed as it's by far the most common fault: cameras like the X-370 have completely manual film loading; the film has to be manually engaged onto the take-up sprockets before closing the back of the camera. After that, correct loading is confirmed by watching to ensure that the rewind crank (top left knob as viewed from rear) rotates every time the film winding lever is used. Note that the frame counter will advance even if the film isn't correctly loaded. Once the film is used up, the winding lever won't operate and the film must be rewound back into the cassette before opening the back of the camera. To do this, you press the recessed button on the underside of the camera and use the rewind crank to rewind the film until you can feel no more resistance at all.

You'll find full instructions on the Norman Butkus website where he's provided a downloadable .pdf manual for your camera for free download.

Hopefully this has solved your problem; if so all I ask in return is for you to rate my answer. If it hasn't, then please add a comment and I'll try to offer other solutions to your problem.


Oct 30, 2009 | Minolta X-370S 35mm SLR Camera

1 Answer

Film won't load on Minolta 400si Maxxum Camera


My daughter took the camera to her photography teacher he was able to load the film by wrapping more film around the roller. It's not as easy to load as my Canon. I thought we had put plenty of film around it already. Oh well, it's working anyway.

Feb 18, 2009 | Minolta Maxxum 400si 35mm SLR Camera

2 Answers

Loading film in my vintage camera..help!


The "magic needles" while making the camera easy to load are about as intuitive as a dead skunk, I had a similar confusion when I got an ME Super. Put the film can in the left side of the camera back (the side with the little thing sticking out is the bottom, it looks upside down this way, but that is correct). Next push the film winder down, this will semi-lock the can into place. Now pull the film-lead across the camera and push it down between some of the white "magic needles on the opposite spool(push it in a bit so that it will stay). Next advance the lever; release the shutter. If the spool starts to turn you are doing it right. Now close the door and continue advancing and clicking until the little frame number window on top reads 1.

May 19, 2008 | Pentax ME Super 35mm SLR Camera

1 Answer

Film not loading properly


The lines could be scratches in the negatives.

Have you looked CLOSELY at your negatives with a magnifier to see if the scratches are on your film?

And when you say "Serviced", do you mean "cleaned" also?

If you have scratched film, then return it to the place you got it serviced/cleaned and let the owner/manager know that you just had it serviced there and it's scratching your negatives.

If you have an automatic camera, this bit below will be of no help.

Assuming that your camera is a manual loader, it may be that you aren't putting enough film into the take up spool for it to catch.

Try putting a little more film into the take up spool when you are loading the camera, and MAKE SURE that the holes in the film LINE UP with the film sprockets.

Then after you close the film door and start advancing your film, look at the film rewind knob, if it isn't turning while you are winding in film, then your film hasn't caught in the take up spool.

Another way to tell if your film is advancing is to shoot a test shot, and then advance the film, and then lightly turn the rewind knob a bit.

You should be able to feel the tension of the film if it is loaded correctly.

Feb 13, 2008 | Nikon FM10 35mm SLR Camera

2 Answers

N75 will not load film


Quick solution: force a manual rewind.
1. Remove film
2. Close camera back.
3. With the power turned on, press the two rewind buttons together. They are marked in red.
4. The camera will make a rewind sound and will stop after about 2 seconds.
5. DO NOT fire the shutter yet.
6. Put the mode on Manual and select a fast shutter speed like 1/90 sec. Any aperture will do.
7. Load the film correctly as given in the user's manual.
8. As you close the camera back, the film will prewind to the end of roll. At the end of the roll pre-wind the LCD will show you the total number of frames available.
9. Select any shooting mode.
10. Go on and take pictures.

Hope this helps

Dec 14, 2006 | Nikon N75 35mm SLR Camera

Not finding what you are looking for?
Nikon FE 35mm SLR Camera Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nikon 35mm SLR Cameras Experts

kakima

Level 3 Expert

96417 Answers

Ric Donato

Level 2 Expert

225 Answers

Bart Pulverman

Level 2 Expert

354 Answers

Are you a Nikon 35mm SLR Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...