Question about Computers & Internet

Open Question

The CB1 on my Brother 970 Knitting Machine stopped working.It stays in the dark green screen when turned on and does not display a row count, does not respond to any anything.

Posted by on

5 Suggested Answers

tom19511
  • 1601 Answers

SOURCE: powers up temporaly displays goes dark

Your monitor has a bad back light. Send it back to your friend

Posted on Nov 23, 2007

SOURCE: Startup

Black Screen shows memory counting which stops at 256 Mb [is correct] Hit F10 & screen says "Setup" in bottom right hand corner-screen is still black. Floppy Drive Bay green light staying on. Regards John

Posted on Jul 21, 2008

  • 1 Answer

SOURCE: black screen

Hi,

change your cmos battery & and set a boot priority in first boot in hdd

Posted on Jul 21, 2008

  • 14 Answers

SOURCE: dark disp-lay

sorry mate,that is dreaded power interter board inside lcd,read about similar benq model dramas here http://www.electronicrepairguide.com/benq-t705-lcd-monitor-repair.html

Posted on Mar 03, 2009

  • 2 Answers

SOURCE: I have a Brother KH970 Knitting machine from a

I have a parts manual & a service manual saved on my pc for the 970 that I can send you when I get home in a couple of weeks. Would that help? It gives the information to do tests etc.
I am also on the Yahoo MK site. That may be a better place to share as I am not sure about this site.
-Janet

Posted on Jun 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Just learning machine knitting on a Knitmaster 360, the manual for cast on, i have tried the way it says a hundred times, and each time the first row knits , when i do the second row, it all knots up, and...


How are you getting on? I'm just learning and I can't even cast on!! My stitches all stay on the front posts that are between the needles and I've no idea how to stop that. Would help if I had an instruction book.

Jul 19, 2011 | Singer Deluxe Knitting Machine

1 Answer

Owners manual for Brother knitting machine model kx-350


You can visit the website written below for a free download of the manual.
http://www.devicemanuals.com/guide/Knitting%20Machine/Brother/Brother-KX-350-Knitting-Machine-Owner%27s-Manual-T0RJNU9Uaz.html
Hope this solution was helpful to you? Please comment for more information and thank you for using fixya.com

Jan 02, 2011 | Computers & Internet

1 Answer

Ihave a brothers PC-7500 and the screen is dark


When your Brother PC 7500 is otherwise working fine but the LCD display screen begins to grow darker and you find you just can't read it, the only thing you can do is replace the Brother PC 7500 LCD screen, or buy a new machine.Brother no longer stock this item direct, but there is an affordable replacement available.
Check this Link

May 29, 2010 | Brother Sewing Machines

1 Answer

My MFC-3240C Brother Printer reads: Unable to Clean. What can I do


Hi you can try
This works with most Brother printers

Procedure how to reset the error 46 error (unable to clean). This can be done on every Brother inkjet machine with a numeric keypad.

- Machine off
- Switch on the machine while holding down the “menu” button until all the leds are flashing on/off. Now you are in “maintenance” mode.
- press 80
- press the “mono start” button several times until you see “purge: xxxx”
- press “2783” in order to reset the purge counter. You will see: “purge:0000”
- press “99” to exit the maintenance mode

Now you are able to print again, but actually your ink absorber box is now full with ink. Ink flooding can happen if you don’t replace this ink box


Also can try.

Reset code.
Press menu then*2864 within 2 seconds (maint should be on the display and all the lights should be flashing, if not try again) press 80
then keep pressing black/mono start button until screen displays ‘purge count’
press 2783 to reset purge count
press stop/exit key
press 99
machine should return to normal



May 10, 2010 | Brother MFC-3240C All-In-One InkJet...

2 Answers

Will not clean servies


Brother MFC-5440CN Unable to Clean error and may work for some others.


Hi you can try
This works with most Brother printers

Procedure how to reset the error 46 error (unable to clean). This can be done on every Brother inkjet machine with a numeric keypad.

- Machine off
- Switch on the machine while holding down the “menu” button until all the leds are flashing on/off. Now you are in “maintenance” mode.
- press 80
- press the “mono start” button several times until you see “purge: xxxx”
- press “2783” in order to reset the purge counter. You will see: “purge:0000”
- press “99” to exit the maintenance mode

Now you are able to print again, but actually your ink absorber box is now full with ink. Ink flooding can happen if you don’t replace this ink box


Also can try.

Reset code.
Press menu then*2864 within 2 seconds (maint should be on the display and all the lights should be flashing, if not try again) press 80
then keep pressing black/mono start button until screen displays ‘purge count’
press 2783 to reset purge count
press stop/exit key
press 99
machine should return to normal



May 04, 2010 | Brother DCP 115C All-In-One InkJet Printer

1 Answer

Clean uneable 46 brother dcp 130c printer


Hi you can try
This works with most Brother printers

Procedure how to reset the error 46 error (unable to clean). This can be done on every Brother inkjet machine with a numeric keypad.

- Machine off
- Switch on the machine while holding down the “menu” button until all the leds are flashing on/off. Now you are in “maintenance” mode.
- press 80
- press the “mono start” button several times until you see “purge: xxxx”
- press “2783” in order to reset the purge counter. You will see: “purge:0000”
- press “99” to exit the maintenance mode

Now you are able to print again, but actually your ink absorber box is now full with ink. Ink flooding can happen if you don’t replace this ink box


Also can try.

Reset code.
Press menu then*2864 within 2 seconds (maint should be on the display and all the lights should be flashing, if not try again) press 80
then keep pressing black/mono start button until screen displays ‘purge count’
press 2783 to reset purge count
press stop/exit key
press 99
machine should return to normal



All the best Pineworks

Apr 28, 2010 | Brother DCP 130C All-In-One InkJet Printer

1 Answer

Unable to clean


Hi you can try
This works with most Brother printers

Procedure how to reset the error 46 error (unable to clean). This can be done on every Brother inkjet machine with a numeric keypad.

- Machine off
- Switch on the machine while holding down the “menu” button until all the leds are flashing on/off. Now you are in “maintenance” mode.
- press 80
- press the “mono start” button several times until you see “purge: xxxx”
- press “2783” in order to reset the purge counter. You will see: “purge:0000”
- press “99” to exit the maintenance mode

Now you are able to print again, but actually your ink absorber box is now full with ink. Ink flooding can happen if you don’t replace this ink box


Also can try.

Reset code.
Press menu then*2864 within 2 seconds (maint should be on the display and all the lights should be flashing, if not try again) press 80
then keep pressing black/mono start button until screen displays ‘purge count’
press 2783 to reset purge count
press stop/exit key
press 99
machine should return to normal



Mar 30, 2010 | Brother MFC-5840CN All-In-One InkJet...

1 Answer

I have a Brother KH970 Knitting machine from a customer that has a problem in the timing. It doesn't select needles. I need instructions on the timing of the machine. I have manuals for older machines, but...


I have a parts manual & a service manual saved on my pc for the 970 that I can send you when I get home in a couple of weeks. Would that help? It gives the information to do tests etc.
I am also on the Yahoo MK site. That may be a better place to share as I am not sure about this site.
-Janet

Apr 03, 2009 | Brother Sewing Machines

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

410 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...