Question about Office Equipment & Supplies

1 Answer

Machine error 41 - Office Equipment & Supplies

Posted by on

  • Anonymous Nov 25, 2008

    machine error 41

  • Anonymous May 21, 2009

    Spoke with customer service at Brother company and they tell me it is a problem due to the use of generic print cartridges. Told me to take to a local service center for repair. Anyone have more details on this problem?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 148 Answers

Machine Error 41 indicates a mechanical malfunction with FAX/DCP/MFC.Often, unplugging the unit from the power source and then plugging it back in again can clear this error message.If the message continues to be displayed on the LCD, please contact YOUR PRINTER Customer Service for more options.

Posted on Sep 16, 2008

  • Zander Rovic Ocampo
    Zander Rovic Ocampo Sep 16, 2008

    PRINT HEAD ERROR on your printer.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Machine error 41


Very likely your print head is faulty. You can get it replaced or try the economical solution below.

I had the same problem after replacing the print head. I removed the ink cartridge and then unclip the two metal two clips by the side that hold the print head. Then I used WD40 to spray through the ink holes until the clear liquid comes out from the print head.Then I replaced everything back and start the cleanning process, do a few test prints. It works ok now, no more Machine Error 41. Therefore, sometime the problem might just be clogged pin heads!

May 15, 2010 | Brother MFC-3220C Plain Paper Inkjet Fax

6 Answers

Dear Sir I have a technical error 41 and i dont know what to do.


Hi,
When did the problem start on the printer


Thanks
proton

Aug 06, 2008 | Brother Office Equipment & Supplies

1 Answer

Error 41 brother all in one :Performed Print Quality Check Sheet $ times. The test sheets became closer and closer to being 100% correct, then error 41 pops up


Machine error 41 is "defective print head".Try to turn off the printer and wait 10 min.Then turn on, if the error continue showing your printer need service.

Oct 13, 2009 | Brother MFC 420CN All-In-One InkJet...

1 Answer

I get error 41 how do i clear this problem


Sorry to say but the only way to clear out a error 41 is to have the print head replaced
cost around 150.00

Apr 20, 2009 | Brother Office Equipment & Supplies

1 Answer

Error 41. Unplug machine and call Brother


Hi there

Error 41 means there is a major problem with the printhead, usually
requires a print head replacement.

My advice is to take it to a
Brother service centre while if it is under warranty.

If it's out of warranty they are usually a throw away job, the heads cost as much as the printer.

Sorry I know what it feels like, just have a go and see what you can do, clean the heads and so on.

Mar 04, 2009 | Brother MFC 3100C All-In-One InkJet...

1 Answer

Code error 41


Error 41

The head drive voltage has not been turned from Low to High within the specified time.

Check:
Carriage ASSY
Main PCB
Print head unit
Power supply PCB

Feb 27, 2009 | Brother MFC 3820CN All-In-One InkJet...

1 Answer

Error 41 MFC 3220C


WELCOME TO THE ERROR 41 DELIMA. YOU WILL NEED A NEW PRINT HEAD, MAY BE U CAN BUY ONE FROM A BROTHER DDEALER AND INSTALL IT GOOD LUCK

Jan 27, 2009 | Brother MFC-3220C Plain Paper Inkjet Fax

1 Answer

Brother MFC 3100 Printer/fax


This is the only reference I could find on error 41: How can I clear the message Machine Error 41 from the display? (ME41)


Machine Error 41 indicates a mechanical malfunction of the Brother
machine. Unplug the unit from the power source and then plug it back
in.

If the error message continues to be displayed on the LCD, please call
Brother Customer Service at 1-800-284-4329 for assistance. The Customer
Service center is open Monday through Friday, from 9:00AM to 7:00PM,
excluding holidays If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Oct 16, 2008 | Office Equipment & Supplies

1 Answer

Brother MFC 3420C Printer/Fax


What do i do to fix Machine Error 41?

May 30, 2008 | Office Equipment & Supplies

1 Answer

Machine Error 41


Error code 41, Print cartridge is bad and gone out. Needs to be replaced by authorize dealer for just under $100.00 ($55.00 part & $40.00 Labor).

Nov 14, 2006 | Brother IntelliFAX 1800C All-In-One...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

448 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

70347 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...