This is the normal cycle time and it can increase if the batteries are a bit weak. This is one of the minor issues with this camera. You should only notice this when using a flash since it has to re-charge the flash circuit, without flash the picture should retuen in a second or less.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There should be a button with a clock icon. Press it and you should be presented with choices for how many seconds you want before the pic is taken. Make your choice and press the shutter button...get in the picture.
I had this same problem. Once I got over about 1200 pictures, the
screen just turned black, and the only setting that would work where I
could see the lcd screen was the easy setting. I had read somewhere
that this was due to the amount of pictures the camera had "counted",
even if those pictures had been downloaded and erased from the camera.
So I decided to reset the camera. Go to the tools list in the menu,
scroll down to "reset all", and when it prompts if you want to "reset
settings to default" click ok. This worked for me, and all of my
settings - sunset, landscape, etc. - now work. Keep in mind that if you have configured any parameters in any of the settings
(shutter speed, lighting, etc.) those will have to be reset.
you might have switched the shooting process to timer mode. please refer the instruction manual to change it back to normal mode.normally there will be button near the lcd screen with the symbol of a timer deviice. if you click it once it sets the delay of shot to 2 sec and for the second time to 10 secs.and for the third time, it goes back to normal mode. thanks for using fixya. please dont forget to rate my solution!!!
Hi, My V570 works fine on widescreen lens (the default on startup) but when I zoom up to switch to the other lens it goes to a dark blank screen and will take a similarly dark blank picture. I can hear the zoom activating as I click it so I think that is ok. I opened the camera