Everytime i turn it on, says: load mp tray. and does nothing but bipping. When I tray to print something, sometimes, print a bounch of pages with numbers. What can i do?

Soulvisitor

• 1113 Answers
• Posted on Nov 12, 2009

SOURCE: messege * load mp tray * but tray has plenty of

MP tray is not the cassette it this flap that pulls down above it.

The machine will revert to asking to place paper in its MP tray when the information it is receiving about the document from whatever program tell it that the size is not the same as what the cassette is set to...

so, check page size in of document in word program or whatever you are using

also check paper type and size settings match those you just checked in the printers properties under printers in control panel.

If you put a piece of paper in the MANUAL BYPASS TRAY bot the cassette it will print on that.

To get evverything back to normal, turn off printer, delete jobs in print que, change paper size of document in word/excell/etc is set same as paper type in printer, print again.. all should be good...

p.s. these are good quality printers that why I bother to answer you... cheers

SOURCE: " Load MP Tray Letter"

Pull down the MP tray and load paper into it.

SOURCE: Kyocera 3800N Defaulted To MP Tray

paper guide was set at A5, then this allowed menu to change feed tray selection

SOURCE: MP Tray

Wrong papaer size settings check the settings

SOURCE: Trying to print labels, but

MP is the tray in the front it looks like a door on the front. When you open it it turns into a tray for you to put the label paper on.