Question about Kenmore 79012 / 79014 / 79019 Gas Kitchen Range

1 Answer

Errror code i keep getting error code EO F2. when i press off it goes out and i can use the oven until it comes on again. if i press the off switch three or four times term 350 pops up. top burners work. model number 665 75843005 barricusa@netscape.net

Posted by on

  • Anonymous Oct 16, 2008

    Code EO - F2 cleared it by pressing the off button, tried to use the oven and of course the code returned shutting off the oven. Called Sears and was instructed over the phone how to clear this error. Yeah, it worked but this morning there's the code again. Now I have to wait until Wednesday for a service tech from Sears to come to the house.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 943 Answers

HI. thanks for the question. the fault code EO F2. means the touch pad key board is the problem. to repair new parts listed . thanks the appliance doc

Posted on Sep 30, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After cooking my whirlpool Electric Range started to beep and shows EO F2. The range top is working ( and range top controls ) but the oven won't shut off and the controls are not working for the oven.


Hello,

Here is what my online service manual for the F2-EO error code says


F2 - E0 Shorted keypad (also called touch pad) 1. Check keypad connector for firm connection (keypad connects to control board).
2. Press CANCEL. If error code returns after 60 seconds, replace keypad (also called touch pad or membrane switch). Some models incorporate keypad in to control board as one unit. In this case, replace control board (also called ERC or clock)


I hope this helps

Gene

Aug 01, 2011 | Whirlpool Kitchen Ranges

1 Answer

New Wall Oven with error code F2 EO "Keypad Disconnected" How to fi?


F2 - E0 Shorted keypad (also called touch pad) 1. Check keypad connector for firm connection (keypad connects to control board).
2. Press CANCEL. If error code returns after 60 seconds, replace keypad (also called touch pad or membrane switch). Some models incorporate keypad in to control board as one unit. In this case, replace control board (also called ERC or clock).

Oct 18, 2010 | KitchenAid KEHU309SSS Electric Double Oven

1 Answer

My new Whirlpool oven Model number GBD 279 PVS02 error code EO F2


F2 E0 is a shorted keypad. Replace the keypad which is your entire touch pad. In rare cases your ERC or electronic range control can also be bad, unlikely though. Hopefully this is still under warrantee as the part alone is over 150.00. I recommend you have a technician replace this as most parts houses will not warrantee a electical part if a customer installs it. Good Luck, Appliance Specialists.

Dec 15, 2009 | Microwave Ovens

1 Answer

After a power down the range keeps coming up EO F2? I have reset using the OFF/clear button. Oven lights but trips off to EO F2


Hi. This code is an indication of a Shorted keypad (also called touch pad)

Follow the steps below to address this issue further.

1. Check keypad connector for firm connection (keypad connects to control board, via ribbon cable). Make sure the connection is sound, and not severed.

2. Press CANCEL. If error code returns after 60 seconds, replace keypad (also called touch pad or membrane switch). Some models may incorporate the keypad in to the control board as one unit. In this case, replace the entire control board (also called ERC or clock).

Dec 04, 2009 | Kenmore Kitchen Ranges

1 Answer

Blinking EO and F2


1. Check keypad connector for firm connection (keypad connects to control board).
2. Press CANCEL. If error code returns after 60 seconds, replace keypad (also called touch pad or membrane switch). Some models incorporate keypad in to control board as one unit. In this case, replace control board (also called ERC or clock).

Jun 24, 2009 | Kenmore 30172 / 30174 / 30179 Gas Single...

1 Answer

EO F2 on our Kenmore oven keeps coming up.


The "F2 - E0" error code means "Shorted keypad".

Remove power from the range, open the control panel and unplug the membrane switch ribbon from the control board.Reconnect power to the range and observe for an hour.If the error code reappear - replace the control board.If not - replace the membrane switch.

May 15, 2009 | Kenmore Ovens

1 Answer

Kenmoore Electric Range - Error Code EO F2


That code means your oven is a piece of ****. Put out in front lawn on big garbage day. Get inside the oven and wait until the garbage men get there. Jump out and yell, "Surprise!". After you've had your fun go back inside, get your keys, and drive to the closest appliance store to get a new one.

Oct 05, 2008 | Kitchen Ranges

1 Answer

Control Panel Display Reading


mommaT, the code has to do with the keypad, key held down too long or stuck or shorted keypad. Have someone remove the key pad ribbon cable from the control board and clean the ends with an eraser. If that doesn't do it, you may need a new keypad. Catriver..post back

May 13, 2007 | Kenmore 75844 / 75849 Gas Kitchen Range

1 Answer

Clean cycle in oven doesn't work: FO EO


Oliversmom, Im not coming up with any information on the model number posted. However on the kitchenaid the F0 E0 is default for no error. Press the cancel button to put the range in idle state. Then in this order press cancel-cancel-start. See if an error code comes up different from the F0 E0. The F0 is what is throwing this whole deal off. If it was F1, F2, F3 etc...it would make more sense. See if you have a complete model number you can post along with the error code after doing the above key dance. We'll see if we can solve the issue....Catriver..post back.

Apr 03, 2007 | KitchenAid KERI201P Electric Kitchen Range

Not finding what you are looking for?
Kenmore 79012 / 79014 / 79019 Gas Kitchen Range Logo

366 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Cindy Wells

Level 3 Expert

4920 Answers

Mike Carew

Level 3 Expert

969 Answers

Are you a Kenmore Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...