Question about Dynamode (HT809STP) Networking Hub

1 Answer

Dynamode ht809stp

How do i install this hub

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 24 Answers

Just plug the power connection
and connect the network cables. and restart the computer.

Summary for Dynamode (HT809STP)
Dynamode products have earned a worldwide reputation for quality. The Dynamode hubs products utilize state-of-the-art design and ASIC-base hardware for high reliability.Dynamode offers the 8-port Ethernet Hub which, in compliance with IEEE 802.3 10 BASE-T standard, is a multi port repeater used in the twisted pair Ethernet Network. Featuring 8 RJ-45 twisted pair ports for twisted pair wiring, one AUI port for thick cabling and one BNC port for thin cabling, it allows to connect up to 8 devices (such as twisted pair Ethernet card), an Ethernet Transceiver and a Tee connector.

Posted on Sep 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where do I find drivers for a Belkin USB Hub?


Hi, when you connect a USB hub, operating system (i.e. Windows, Mac, etc ) it should install automatically a generic driver for it, only when you connect a device to USB hub, in example, a camera, you have to install drivers for that specific device according to its installation guide.

May 09, 2016 | Belkin Networking Hubs & Switches

1 Answer

Power light flashing but no connections flashing. although the pc and server connect when joined directly to one another.


Open the switch case and replace 2 capacitors (on power supply module) of 2200 mf /10 volt to 2200mf / 16 volt.

Sep 01, 2011 | Dynamode (SW240010-R) Networking Switch

2 Answers

All the lights flash steadily when plugged in with or without any connections,


Try disconnect the power and then reconnect after a while. If it's a manageable switch then try to reset the switch.

Mar 14, 2011 | Dynamode (SW240010-R) Networking Switch

1 Answer

Direction of use


If you are trying to understand how to use the device; its pretty simple

Hook each device (computer, router, gaming console) that you want to be able to talk to each other over the network using an ethernet cable (easily found at local retailers like best buy).

You will also need to assign IP addresses to each of the devices, for more information, see below.

IP addresses
http://en.wikipedia.org/wiki/IP_address

you will need to look at the product documentation for each device you want to connect on how to set the IP address.

If you have any questions, please let me know

Thanks,
Mike

May 08, 2010 | Dynamode SW80010-F Networking Switch

1 Answer

HOW DO I GET INTO SET UP MODE ON ROUTER


press [windows]+[r"\]. type in "cmd" and press [enter]. type "ipconfig /all] and press [enter] find your IP address. type the first two sets of numbers into a web browser and replace the last two sets with 1.1.

you can do a search on google to find the default username and password.

Dec 25, 2009 | Dynamode (HT809STP) Networking Hub

1 Answer

Can't install my Hub-To-Go


find out the m/b make and try to download drivers from internet.

Jan 16, 2009 | Belkin Hub-To-Go 4-Port

1 Answer

I have a Dynamode 6004 W-G1 wireless router


To improve wireless signal from your wireless router you can try changing the wireless channel of it from the router setup page, set the wireless channel to the highest one so it will avoid interferences on your location........

Jan 15, 2009 | Dynamode (HT809STP) Networking Hub

2 Answers

I connecteit be corrected. T


u must installed the USB 2.0 driver in your install. The problem is they support USB 2.0 driver. so u must updated. ok

Jul 13, 2008 | Networking Hubs & Switches

1 Answer

Dynamode BR-6004 W G1


Try holding down the reset switch on the back with the router turned on for about 10 seconds or more.

the following info was found at http://www.help2go.com/component/option,com_forum/Itemid,32/page,viewtopic/p,126642/

i believe the default password/username for your router is:

username:guest
Password:guest

www.portforward.com wrote:
You should see a box prompting you for your username and password. Enter your username and password now. By default both the username and password are guest. Click the Ok button to log in to your router.


this info was taken from
http://www.portforward.com/english/routers/port_forward ing/Dynamode/BR6004W-G1/WinMX.htm

Mar 15, 2008 | Dynamode (HT809STP) Networking Hub

1 Answer

Configerations


Model? Most Hubs are not configurable, but this may not be the case with this one.

Nov 24, 2007 | Dynamode (HT809STP) Networking Hub

Not finding what you are looking for?
Dynamode (HT809STP) Networking Hub Logo

Related Topics:

250 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dynamode Networking Hubs & Switches Experts

Mike

Level 3 Expert

4331 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Dynamode Networking Hub and Switch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...