Question about Lexmark P4350 All-In-One InkJet Printer

1 Answer

Error 2200 When I turn on my Lexmark P3450 it says, "Error: 2200 . Consult User Guide." It will not print, or do anything else.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,029 Answers

Step Action
1 Power off the printer and remove the power supply from the back of the unit. Wait 30 seconds. Then reinsert the power supply and power the printer on.

Did the error message return?

Yes: Continue to step 2.
No: Attempt a test scan. If the error message does not reappear, the error is resolved.

2 Power off the printer and remove the power supply from the back of the unit. Open the scanner cover. Check the scanner glass for cracks and the scanner casing for cracks. Close the scanner lid. Open the top cover of the printer. Using the carrier belt, move the cartridge carrier to the middle of the unit. Remove both cartridges, close the top cover, reinsert the power supply, and power the printer on.

Did the error message return?

Yes: Continue to Contacting Lexmark.
No: Continue to step 3.

3 Power off the printer and remove the power supply from the back of the unit. Open the top cover of the printer. Using the carrier belt, move the cartridge carrier to the middle of the unit. Insert the color cartridge, close the top cover, reinsert the power supply, and power on the printer.

Did the error message return?

Yes: Repeat step 3 with another color cartridge. If the printer fails again, continue to step 4.
No: Repeat step 3 and install the black/photo cartridge. If both cartridges are installed, attempt a test scan. If the error message does not reappear, the error is resolved.

4 Power off the printer and remove the power supply from the back of the unit. Open the top cover of the printer. Using the carrier belt, move the cartridge carrier to the middle of the unit. Remove the color cartridge and insert the black/photo cartridge. Then close the top cover, reinsert the power supply, and power the printer on.

Did the error message return?

Yes: Repeat step 4 with another black/photo cartridge. If the printer fails again, continue to Contacting Lexmark.
No: Install the color cartridge. If the printer fails, continue to Contacting Lexmark. If the error message does not appear with both cartridges installed, attempt a test scan. If the error message does not reappear, the error is resolved.

Posted on Sep 16, 2008

  • Starnley Johnwells
    Starnley Johnwells Sep 16, 2008

    dont forget to rate this solution

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lexmark X5650 cartridge error consult user's guide


Don't know for sure, but I found some user manuals on amazon, which can be helpful... take a look here: Amazon com lexmark manual I hope this helped you. Have a nice day

Mar 23, 2012 | Lexmark X5650 AllInOne InkJet Printer

1 Answer

Halfway through sending a fax I got an 'error 2200 - conslut your user guide' nessage'. Is there a user guide online or can you help me?


The 2200 error message indicates that the scanner has stalled. Please refer to this article in the Lexmark website to determine and resolve the problem: 2200 Error on the Lexmark X7100 Series All-In-One.

May 03, 2011 | Lexmark X7170 All-In-One InkJet Printer

1 Answer

We have a lexmark p4350. we cant get it to print


The error indicates an error in communication either between cartridges or the cartridges and the printer. Here's an article in the Lexmark website on 1203 Error Message on the Lexmark P4350 / P4330 Photo All-In-One. Just click on this link: http://bit.ly/9sK9hE. This should guide you on what to do.

Jul 05, 2010 | Lexmark P4350 All-In-One InkJet Printer

2 Answers

6170 I HAVE A ERROR MESSAGE STATEING 50C CONSULT USER GUIDE AND I DO NOT HAVE A USER GUIDE


Hi. The error tells you that your print cartridge has shorted. Here's a link to the Lexmark website to give some instructions on how to remedy the problem. Just click on this link: http://bit.ly/aSWvpk . Good luck!

Mar 23, 2010 | Lexmark X6170 All-In-One InkJet Printer

1 Answer

My lexmarkp4350 is not printing the black ink


Ok this some times works.


Error 1203 is an issue that occurs either when a cartridge is bad or the printer cartridge Slot is bad...

1 - try cleaning the copper contacts of the both carts and cart slot in the printer and try again..
or
2 - when error shows up, shut the printers power off; wait one minute and turn it back on press copy.




Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Jun 26, 2009 | Lexmark C533DN InkJet Printer

2 Answers

Lexmark P6250 Printer error 1203 - Consult User Guide


It is a hardware printing problem . Try to clean contacts in printers in cartridge holder by alcogol and elastic rubber. it may become dirty an poor contact. after this you can try this:
Put some layers of the sticky tape on cartridge to improove force of contact.
ad5c564.jpg

Mar 06, 2009 | Lexmark P6250 All-In-One InkJet Photo...

1 Answer

It will not print


Try to reinstall the printer driver 

Nov 13, 2008 | Lexmark X5150 All-In-One InkJet Printer

2 Answers

Cartridge error


i have a lexmark p4350 and just recently got a eror message 1102, says consult user guide, cannot find that error message in the guide, what is it, thanks

Sep 10, 2008 | Lexmark P4350 All-In-One InkJet Printer

3 Answers

My Lexmark is X6100 Series - Cartridge Error 50C consult user guide


Cartridge Error 50C
Your print cartridge has shorted.

1. Power off your All-in-One and unplug it.
2. Plug in your All-in-One again and turn it on.
3. Uninstall and then reinstall your cartridges.
4. If this does not resolve the issue, try the troubleshooting steps for the other cartridge errors below.

Error: Black Cartridge Missing
The black cartridge is not installed. (Install cartridge PN 82)

Error: Color Cartridge Missing
The color cartridge is not installed (Install cartridge PN 83)


Cartridge Error
Complete the following instructions:

1. Power off your All-in-One.
2. Use both hands to lift up the scanner unit until the scanner support holds it open.
3. Turn the All-in-One on. The print cartridge carrier moves and stops at the loading position, unless the All-in-One is busy.
4. Remove the color print cartridge.
5. Lower the scanner unit until it is completely closed.
6. If the error message reappears, replace the black print cartridge with a new print cartridge.
If it does not repeat steps 1-3 and then go to step 7.
7. Reinstall the color cartridge and remove the black print cartridge.
8. Lower the scanner unit until it is completely closed.
9. If the error message occurs again, replace the color cartridge.
10. If an error message reappears, repeat steps 1-3 and reinstall both print cartridges.
11. Lower the scanner unit until it is completely closed.
12. If you receive the error message again, replace both cartridges.

Jan 14, 2008 | Lexmark X6170 All-In-One InkJet Printer

2 Answers

Lexmark p6210


I have an error 2200, how do I solve it? please help

Apr 06, 2007 | Lexmark P6250 All-In-One InkJet Photo...

Not finding what you are looking for?
Lexmark P4350 All-In-One InkJet Printer Logo

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...