Question about Ulead Videostudio 8 for PC

1 Answer

EasyCap usb adapter sending images only from vcr. No sound.

I have the EasyCap USB 2.0 Video Adapter with audio device. It came with Ulead VideoStudio version 10.0 and the USB plug with red yellow and white leads and s-video lead and then usb port on the other end of the adapter.

I am using this to hook my vcr up to my computer to capture videos however I am getting video images but no audio sound.

Don't understand what is going on. The package says it can send images and sound from a video tape in a vcr.

Help!

From windgoddess27@bigpond.com

Posted by on

  • 1 more comment 
  • welshviking Oct 11, 2008

    i can get sound or video feed in vstudio but not at the same time.

    go to the device in windows explorer, right click and select properties

    toggle between s-video and composite input and eventually the sound comes from the speakers. video feed seems ok in device window.

    however when i crank up ulead vstudio i get the sound but the video feed is a green screen (with a distorted sound signal bar in the image)

    so it looks as if there is a mismatch between the sw, either the driver (stk1150) or the ulead vstudio.

    btw, i can see the video feed in movie maker but when i try to save it, the error "xxx.wmv is not indexed and cannot be imported"



    i have heard there is a later version of the driver stk1160 and that another sw called AMcap is supposed to help...anybody got this device to work?

  • Anonymous Mar 08, 2009

    I HAVE EASY CAP, BUT I HAVE IMAGE NO AUDIO

  • dotan9 May 24, 2009

    same problem.

    when I use StkATVAp then Options-->Audio preview & Audio Format are disabled.

    Device Manager->Sound,video game controllers->USB Audio Device -> USB\VID_05E1&PID_0408&MI_01\6&2E0A1711&0&0001
    Imaging devices->Syntek STK1160-> USB\VID_05E1&PID_0408&MI_00\6&2E0A1711&0&0000

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

While i preview mode there is no sound only image. when you record then playback sound is there.

Posted on Sep 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ulead videostudio 10 am having out of sync audio after burning to dvd any ideas please


no assistance needed now, problem solved! anyone who has this easycap video capture if you have it plugged into the front usb ports it will not work! plug it into the usb's on the motherboard in the back of the pc tower and presto everything works!!!!

Dec 21, 2009 | Ulead VideoStudio 9

1 Answer

I purchased an EasyCAP capture video adapter with Audio. All seems to be running well apart from there being no sound . The video image shows on the screen. I have ensured there's no problem with the vcr,...


Many thanks for your email ~ one of my colleagues has managed to rectify the problem. He did try explaining how he did it but it was way above my head. Thank you for taking an interest.

Regards

Paul Watson

Nov 26, 2009 | Ulead Videostudio 8 for PC

3 Answers

EasyCap DC60 Vista 32 bit Driver


hi : i get the same problem but i solve it ............ how ?
i uset tow kind of cables in the same time : the svedio cable and the av cable
from the source connect the svedio normally to get a vedio and the av
cabe tow of them : the red and the white in their same color jacks .
to the easycap connect the svedio normally and the red av to the red and the white to the white and leave the yellow

but unfortunetlly this way work vey perfect withe me only on widows xp sp3 and im still keep trying to make it work on vista .
good luck to all .

Jun 22, 2009 | Ulead Videostudio 8 for PC

1 Answer

Easycap video adapter driver will not install on PC from the CD


Goto youtube.com. and search:How to get EasyCap Drivers or http://www.megaupload.com/?d=W64LW1DJ and type in the 3 LETTERS.Wait for the free download on the right side.After I installed the Syntek STK 1160 drivers I still could not capture.THIS STEPS SOLVED IT: 1.OPEN THE ULEAD VIDEO STUDEO PROGRAM 2.CONNECT THE EASYCAP USB DEVICE 3.ON TOP CLICK CAPTURE 4.IN THE MIDDLE CLICK CAPTURE VIDEO.5.UNDER THE WORDS:CAPTURE FOLDER, CLICK ON OPTIONS (THE LITTLE ROUND GEAR OBJECT) 6.CLICK VIDEO AND AUDIO CAPTURE PROPERTY SETTINGS 7. CLICK SOURCE 8. MAKE SHURE TV SYSTEM IS THE ONE IN YOUR COUNTRY 9.CLICK OK.10.A BLUE SCREEN APPEARED AND WHEN I PUSHED THE PLAY BUTTON ON THE DV CAMCORDER I COULD CAPTURE THE VIDEOIMAGE ON THE LEFT SIDE.
WHEN I INSTALLED THE ULEAD PROGRAM I DID SELECT THE TV SYSTEM IN MY COUNTRY(PAL) BUT WHEN I DID STEP. 7, I SAW IT WAS (NTSC).JUST FOLLOW THE STEPS.GOOD LUCK.I SOLVED MY PROBLEM IN 6 HOURS :p

Jan 28, 2009 | Ulead Videostudio 8 for PC

2 Answers

Have EasyCap video capture device and vista x86


I have windows vista and my drivers load fine. Plug in the unit and the drivers load. I have the 4 camera easycap and the VCR easycap. Install drivers first before plugging in the unit. Restart computer, plug in unit, check device manager if there is a stk1150 loaded under image. My problem is getting small files from the recordings. I converted 2 mins of my daughters dance solo and it turned out 1.7gb AVI file without sound. Changing the options to mpeg or WV files will crash the program becuase something doesn't match. I need to play with it more to understand it better.

Jan 20, 2009 | Ulead Videostudio 8 for PC

6 Answers

Audio in EasyCap/VS10


I had exactly the same problem and solved it by updating the drivers for the USB sound/audio device.

My XP version is in Swedish so I´m not sure what it says in English, but it should say something like the following.

Go to the "Device manager" by right clicking on "This computer" and choosing "Properties", locate the "USB sound/audio device" under the "Sound, Video and Game"-category and right click and chose "Update drivers". Then chose "Search for drivers on the internet" and chose "Recommended installation".
My new drivers are called "USB EMP Audio Device". They work perfectly.

I wasn´t able to update the actual EasyCap video adapter, but it doesn´t seem to matter if you´re having problems with the sound. Although I can´t use an S-videocable, only a videocable, otherwise the picture turns black and white.

Hope this helps!

Mar 07, 2008 | Ulead Videostudio 8 for PC

11 Answers

EasyCap in Windows Vista


you will need ulead 10 on vista or download amcap free that works well on vista

Nov 10, 2007 | Ulead Videostudio 8 for PC

19 Answers

EasyCap Video Capture


Hi
I had the same problem. No picture and no sound.
Here is what I did to solve it.

1. I Un-installed the software and restarted the computer.
2. Placed the installation CD (that came with the product) back in the CD drive.
3. Click on "Install Driver" (this only installs the USB 2 drivers so that the computer can see the device)

Make sure you do not attach the Easycap Device before you have installed the USB Driver (as above).

4. Once USB Driver has been installed then plug in the Easycap USB Device, windows should then detect the new device, to make sure:-
5. Right Click "My Computer" "Properties" "Hardware" "Device Manager" check "Imaging Device" (which is where my STK1150 Driver was installed) and make sure it has no yellow exclamation mark next to it.

6. Go back to CD and "install the Uplead Software", you then have to Restart the computer.

Once all installed you can then connect your external device VHS Player/Camcorder etc to the Easycap device, using the Red/Yellow/White leads.

I like many before me, tried and I tried to get the image to play on the software "Capture" screen but all to no avail, I was pulling my hair out, I wasted two days on it, I finally decided that this product was a total load of rubbish and I had wasted my money and it had to go.

Then a major break through, some smarty pants made the comment about INPUTS & OUTPUTS, my prayers along with many others could have been answered ??....

I had actually plugged the Red/Yellow/White leads into the INPUT terminals of the external VHS Player, when they should be plugged into the OUTPUT terminals of the external VHS Player/Camcorder.

On a Camcorder the RED/Yellow/White terminals are usually Output terminals but on a VHS Player they are usually always Input only !!....

I tried running my Camcorder through the software and Hey Presto that worked a treat.

So in order to get my VHS to play through the software I ended up having to buy a Scart OUT (very important "OUT") Red/Yellow/White adapter (see link for product image)

http://www.maplin.co.uk/Search.aspx?criteria=scart%20out&source=15&SD=Y

Once all connected I pressed play on the VHS Player and I have to say that nearly fell off my chair "IT WORKED - IT WORKED - IT WORKED"


Sep 30, 2007 | Ulead Videostudio 8 for PC

4 Answers

Problem in Capture


I don;t know if this is the solution to your problem but it might work, as it did for me.

When you start ULead Studio click on the capture tab, then click on the camera icon named "capture video", then in the middle of the page you will notice the "options" icon (looks like a cog) go to Input source and then at the top of the window you will see "input source" again, click the dropdown list and select "video composite". Try that and see what happens.

Aug 01, 2007 | Ulead Videostudio 8 for PC

Not finding what you are looking for?
Ulead Videostudio 8 for PC Logo

3,948 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ulead Computers & Internet Experts

Barbat Nae
Barbat Nae

Level 3 Expert

508 Answers

Daniel Florin
Daniel Florin

Level 2 Expert

203 Answers

 Grubhead
Grubhead

Level 3 Expert

4678 Answers

Are you an Ulead Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...