Jvc stereo receiver CA-HXD7

fortunately for you , resistors are color coded so read the band colors and get spares

most of the time the main o/p ic goes bad after awhile due to age & heat ..

Try going to the crutchfield website and look for help installing stereo. they can get you vehicle specific wiring codes for free. Also, almost everey stereo has common color codes for wiring. red- switched batt. +, yellow-constant batt. +, black= ground, blue- power anrenna, etc.

If you need further help, reach me via phone at https://www.6ya.com/expert/david_f2436a37cbb50365

OK this is the protection mode! There is a short circut! unplug and check all back speaker connections making sure no stray wires are touching metal or each other ! if this does not help the short is inside of unit and will have to be fixed by a pro!Please rate my answer and help keep this area FREE! THANK YOU!

Hi fccjben;

The color code is as follows: blk = 0; brn =1; red = 2; orange = 3; yellow = 4; Green = 5: blue = 6; violet=7; Grey = 8; white = 9

Unfortunately, if it is wirewound, they usually printed the resistor value on the body of the resistor. For sure it shouldn't be glowing. Sorry I can't be more help, but without a schematid, can't do much else

Good luck Loringh

Look in user manual index for "unlock". It shoud have a default code there.

If not, plz provide the full product model #. It should be on a tag on the back or bottom of your unit.

I'm sorry, but you won't be able to that.

cheack the speaker wireing.if thats not the pro i sugg the repair shop your unit could have over heated.

Researching resistors---

What caused the resistors to burn?? Have you already fixed

that? If so, what exactly was it ???   let me know...T.

i have a jvc compact component system ca-hxd7 an when you trun it on it pop real loud an then read PROTECT then goes off what can we do