My i phone 3 cannot find any bluetooth devices, just keeps searching

Try this: turn off 'bluetooth' and 'device', then turn on 'bluetooth' and turn on device not to keep power button 2 sec., but keep 4- 5 sec. after 4- 5 sec. device turning on in pairing mode.

Try to delete all paired devices. MAYBE, there is no vacant room for new searches.

1. ok when the headset is off keep your finger on the botton until it goes blue (stays blue)

2.when gone solid blue search on your phone for bluetooth
devices and you should find it

3. then it askes for the pairing key type in 0000

4.when you play music while bluetooth hedset is on and bluetooth is on it should play in the headset

This has worked for 99% of bluetooths . Turn off bluetooth complety.Go to search for devices menu on your phone but dont search yet.. Press and HOLD the power button on the bluetooth do not let it go. when the bluetooth starts blinking (some will blink blue some red some both) When it starts blinking keep holding power button(on bluetooth) while doing this then do search for devices on your phone when should see it pop up. when you go to pair therm it will ask for password most are default 0000.

Hi,
1.First switch on the bluetooth in mobile phone.Keep the headset switched off.
2.Now press the call button for 2 seconds if you are paring this headset for first time,If this head set is aired already with another mobile press for 8 seconds until the headset status indicator begins to flash blue then red
3.Now search the bluetooth by your mobile device.It detects and you can pair it
Thank You

Hello, Barb.

Here are some instructions from the manual:

To set up a Bluetooth connection, do the following:
1. Select Menu > Settings >
Connectivity > Bluetooth.

2. To activate or deactivate the Bluetooth function, select
Bluetooth > On or Off.
Indicates an active Bluetooth connection.

3. To search for compatible Bluetooth audio devices, select
Search for audio enhancements and the device that you want to connect to the phone.
To search for any Bluetooth device in range, select Paired
devices. Select New to list any Bluetooth device in range.
Scroll to a device, and select Pair.

4. Enter the Bluetooth passcode of the device to associate (pair)
the device to your phone. You must only give this passcode when you connect to the device for the first time. Your phone connects to the device, and you can start data transfer.

Hope this helps.

Ensure that your phone is switched

on and the headset is switched off.

2. Press and hold the power key until

the green indicator light starts to

flash quickly.

3. Activate the Bluetooth feature on

the phone, and set the phone to

search for Bluetooth devices.
4. Select the headset from the list

Besure that you hit the button on the bluetooth at the same time you hit your phone to search for devices. Sometimes you might have to swtich up the timing. Its a weird thing sometimes with these bluetooth devices and cell phones. Also keep your bluetooth near your phone as you do it. 
Hope this helps. Don't forget to rate me :)

Hi,

follow the steps below:
• Setting the headset into pairing mode
1) Ensure the headset is fully charged
2) The headset must be switch off
3) Press and hold the on button for +- 8 seconds until the light flashes red-blue
4) The headset is now in pairing mode
• Searching for the headset on the phone
1) Go to “settings” or “connections”
2) Select Bluetooth, then options
3) Select Devices and click add
4) The phone should search for any available Bluetooth devices and display what was found
5) Select the Motorola device and click add
6) You will be required to enter in a pass code which is standard ‘0000’
7) If successful then the headset will start flashing BLUE every few seconds.
• The headset is now paired with the phone

Hope this helps
Season's Greetings from Fixya!

Chris (ziraffa)

I just figured out how to reset the 3XXPlatronics 330. The guest might of of made it a little confusing for some:
1) TURN OFF bluetooth head set by holding the volume control button for about a few seconds until it flashes blue.
2) Make sure your phone's bluetooth is on and on discover mode.
3) Turn on the blue tooth head set (NOTE: HOLD DOWN THE VOLUME BUTTON UNTIL IT FLASHES BLUE AND RED)
4) Lastly, go into your search menu to find new bluetooth devices. The device should show up as "3XXPlantronics" (PASSKEY IS 0000).
P.S. Keep in mind this worked for me, but if it doesn't work feel free to email me at; [email protected]