Change ink cartridge - Office Equipment & Supplies

hi,
following images and steps may guide you.


first know the parts.

..

Tear open the black ink cartridge bag at the notch and remove the ink cartridge.
IMPORTANT: Insert the ink cartridge immediately to prevent any drying of the ink.





Remove and discard the orange cap.
IMPORTANT: Handle ink cartridge carefully to avoid ink transfer.




Insert the black ink cartridge into the printhead. User's




Press down on the ink cartridge until you hear it snap into position

Tear open the color ink cartridge bag at the notch and remove the ink cartridge.

Remove and discard the orange cap.

Insert the color ink cartridge into the printhead

Press down firmly on the cartridge until you hear it snap into position
Close the printer access door.




regards,
cseian

Hi,
Make sure Orange protective cap (tape) has been removed from the bottom of the ink cartridge.
Either ink Cartridge is not installed properly or the function for detecting the ink level is disabled. Make sure that you install ink cartridges at correct position as indicated by the label on the print head holder. Press PUSH mark until ink cartridge click into the place.

Hope this will solve your problem.
Thanks for using Fixya.

Reseat all of the ink cartridges, I had the same problem this fixed it.

http://files.support.epson.com/htmldocs/nx110_/nx110_ug/wwhelp/wwhimpl/js/html/wwhelp.htm
Replace Ink Cartridges
Your Epson Stylus NX110 Series and its software will let you know when an ink cartridge is low or expended.
If ink is low, the ink light flashes. You can continue printing until a cartridge needs replacement.
If a cartridge is expended, the ink light stays on. You must replace the cartridge to be able to print.
SEE IMAGE BELOW
Warning:
Keep ink cartridges out of the reach of children and do not drink the ink.
Note:
If you need to change a cartridge before it or any other cartridges are low or expended, run the Ink Cartridge Replacement utility.

You cannot print or copy when an ink cartridge is expended even if the other cartridges are not expended. Replace any expended cartridges before printing or copying.

Leave your old cartridges in the Epson Stylus NX110 Series until you are ready to replace them to prevent the print head nozzles from drying out.
When an installed ink cartridge is more than six months old, you may need to replace it if your printouts do not look their best, even after cleaning and aligning the print head.
Follow the instructions in these sections to check and replace your ink cartridges:

Changing a printer cartridge is not complex but improper handling of the parts may damage the printer and the cartridge. If the user notices that while printing the ink comes out dry or faded, it may be time to change the ink or the toner. The user will know if it is time to change the toner because instead of a sharp image, one will get a faded image. It is time to change the ink cartridge when the printing comes out spotty or colors are used to replace others —for instance, blue for black or yellow for red. Remember, faded images signal the need to change the toner; spotty printing signals the need to change the ink cartridge get more help for change cartridge .
Hope this helps you.

http://crm01.konicaminoltaeurope.com/openmind/technic/engineer/qmspubkb.nsf/0/70744652a954e650c1256f820078e0a2/$FILE/MC24x0-Replace%20Toner%20Cartridge.pdf
Goto the above link and it shows the PDF doc. for changing the cartrides.

Lift the priner unit lid on the printer llift he print cartridge lid,
The ink cartridge carrier moves and stops at the loading position unless the printer is busy.

Press down on the ink cartridge lever to raise the ink cartridge lid.
Remove the old ink cartridge.
Dispose of the old cartridge properly.

If you are installing a new ink cartridge, remove the sticker and transparent tape from the back and bottom of the ink cartridge.

Insert the new ink cartridge.

Snap the lid closed.
Lift the printer unit, and hold the scanner support up while lowering the printer unit until it is completely closed. Let me know if you have any questions.

http://gdlp01.c-wss.com/gds/0300001548/MP620_GS_EN-US_V3.pdf

When inserting a new cartridge, you may receive a prompt

"The installed ink cartridge differs from the original ink cartridge for the printer. Your printouts may be different from those printed using original ink cartridges. Do you want to continue using the currently installed ink cartridge?"

If you click Yes, printing will continue. If you select No, you will be prompted to change the cartridge. Manufacturer prompts may vary.

Here is the manual

http://support.dell.com/support/edocs/systems/725/en/index.htm
Replacing an Ink Cartridge

1. Turn on your printer.
   
   
2. Lift the front cover.
   
   

The ink cartridge carrier moves and stops at the loading position unless the printer is busy.

1. Press down on the ink cartridge lever to raise the ink cartridge lid.
   
   

1. Remove the old ink cartridge.
   
   

1. Dispose of the old cartridge properly.
   
   
2. If you are installing a new ink cartridge, remove the sticker and transparent tape from the back and bottom of the ink cartridge.
   
   

1. Insert the new ink cartridge.
   
   

1. Snap the lid closed.
   
   

1. Close the front cover.