Question about PC Desktops

1 Answer

Router setup for ipod - PC Desktops

Posted by on

  • Anonymous May 10, 2009

    porte chiuse dlink2640b

  • Tim Babcock
    Tim Babcock May 11, 2010

    Are you using this for Ipod Touch or Iphone using wireless networking?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 300 Answers

Shawn B

First off is your Router Set up?
should be this to log into it
http://192.168.1.1/

then go to Wireless settings
http://192.168.1.1/Wireless_Basic.asp
should have your settings set to Mixed

then click the tap at the top that says Wireless Security
http://192.168.1.1/WL_WPATable.asp
Set up your wep key to make sure your network and home computers are safe from hackers...

go onto the ipod and enter your wep key conect and to make sure your conected to yuor router folow steps below

then go to the Status tab
http://192.168.1.1/Status_Router.asp

Click Local Network tab
http://192.168.1.1/Status_Lan.asp

click the button at the bottem that says DHCP list
http://192.168.1.1/DHCPTable.asp

should see ipod conected in the list Az.

Posted on Sep 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Just bought PB Ixtreme x5620. i am trying to connect my virgin broadband to the pc. i have netgear router which has the yellow cable in the moden and router and the blue cable in the PC and router. i can...


Hi,

Can you supply more detail of your network setup? You have a broadband modem, a seperate router and the PC.

For this setup cabling should be ....

1. Phone Socket (Pref. Master socket) to ADSL socket on modem

2. Modem LAN socket to Router WAN socket

3. Router LAN socket to PC Ethernet socket

Usually in this configuration you will have to switch off DHCP on either the modem or the router as they may both be trying to supply IP addresses to your PC. I would suggest disabling DHCP on the router and leaving the ADSL modem to supply IP addresses. If you do this you will have to setup the Router with a valid fixed IP.

Have fun!

Cheers,
Ripface.

Oct 25, 2009 | PC Desktops

1 Answer

Wifi from pc to ipod via usb


You need to connect your wifi router to the Internet connection first, then your router to your computer. After connecting, follow the setup instructions for the router.

Oct 13, 2009 | PC Desktops

1 Answer

My WRT54G2 Linksys router is not recognized by my computer at the end of the installation CD.


router is not a system device that is why you cant see your router on your computer, if your referring about the linksys installation disk this will guide you to setup your router to manage all your device that you want to connect to it. to see the router you need to connect your computer to your router using a ethernet cable on the lan port and run the linksys disk and it will walk you thru the setup of your router

Nov 11, 2008 | PC Desktops

1 Answer

I have a new computer laptop and need to connect to my router WRT54GS Ser # CGN10D815901 and can't get on the internet. I think I just need my scurity key. I am WEP security code, correct? I had the piece...


  1. Access the router's setup page using a computer that is wired or physically connected to the router.
  2. To access router's setup page, launch IE and on the address field type 192.168.1.1 (which is the default IP address of Linksys routers). Then, it will ask for a username and password. By default, there is no username. The password is admin.
  3. Once you're in the Linksys setup, go to WIRELESS tab. There is a subtab called Wireless Security.
  4. Click on wireless security tab and you will find there the security key or wep key that is enabled in your router.
Hope this helps!

Nov 10, 2008 | PC Desktops

1 Answer

Limited or no connectivity to the internet. my setup: the telephone port is approx 30m from where i need internet access. Originally I had a dlink wireless router set up but was connected via cable, now...


On which port of the D-link router did you plug the WRT160N router?

Do this setup.

Disconnect the WRT160N from D-link.

Connect a computer to port 1 of the WRT160N. Access the setup page by typing 192.168.1.1 on the address bar. you may need to type in the username and password for WRT160N. on the setup page Change the LAN IP address from 192.168.1.1 to 192.168.2.1. save the settings.

Connect a cable from port 1,2,3 or 4 of the D-link router to the Internet port of the WRT160N. turn off everything then turn them on starting from cable modem>D-link >WRT160N then computer.

You should be able to access the internet.

Oct 08, 2008 | PC Desktops

1 Answer

Broken my setup cd and cant install my netgear router


IF you cannot install the router because the setup CD is broken , you can manually configure the router , If you know how to access the router setup page you can already amnually configure it but if not I will advice you to call Netgear so one of their tech support can walk you through with the manual configuration of the router, this is the number 1-888-638-4327 .....

Hope that helps...........

Sep 14, 2008 | PC Desktops

1 Answer

I have a Belkin Wireless G Plus MIMO Router that I lost the setup assistant cd to. How can I still hook it up and make it work?


You can still configure it even without the setup CD of the router, you just need to access the router setup page using its IP address, usinga computer wired to the router, But if you want you can call Belkin tech support so one of their tech can walk you through on how to manually configure the router 1-800-2235546..

Hope that helps........

Aug 28, 2008 | Belkin PC Desktops

1 Answer

How do I set up my Linksys router?


Physical Setup of a LinkSys Router Each model of LinkSys router will differ slightly, but the general design is similar across all models. Therefore, the setup is similar across all models.
  1. Attach the antennas to the router (if your LinkSys router support wireless)d
  2. Plug the Ethernet cable from your broadband Internet provider into the port labeled "Internet"
  3. Plug another Ethernet cable into one of the available ports
  4. Plug the other end of that same cable into an Ethernet port on your PC
LinkSys Router Configuration LinkSys routers now ship with a Setup Wizard which is intended to simplfy basic configuration tasks.
We do not recommend the LinkSys Setup Wizard for two reasons:
  1. The Setup Wizard is not significantly easier that the regular configuration menus
  2. If you use the Setup Wizard, you will end up learning two interfaces for your LikSys router instead of just one
Instead, we recommend simply starting your web browser and jumping into the configuration.
Once your web browser is open, go to the URL http://192.168.1.1/. This will take you to a popup box which asks you to enter a username and password.
setup-linksys-router.jpg
Logging in to a LinkSys Router
The username is either blank or "admin" and the default password is "admin".
Once you are past the login screen, you are able to access (and change) a plethora of configuration options for your router.
Don't be worried by the enormous number and variety of options, your LinkSys router ships with default settings that enable it to work right out of the box in most environments.
From here the configuration options that you choose are largely up to your own personal preference.
If this is a wireless router, we recommend that you consider setting an SSID to identify the router as your own and configuring WEP to encrypt your wireless traffic.
LinkSys Router Setup Video Tutorials Learn how to set up your Linksys Router.





Thomas installs a Linksys router to demonstrate what ease-of-use means.

I really hope this information is helpfull.

Aug 12, 2008 | PC Desktops

1 Answer

I cannot get my wireless router to work after resetting it.


When you reset the router, it will go back to its factory settings which means you will lose all the settings or configuration you created on the router.

You have to reconfigure it using a setup CD supplied with the router or reconfigure it manually by logging in via the setup page of your router using your browser (IE or Mozilla).

Aug 06, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

157 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...