Question about Maytag PAV2300 Top Load Washer

2 Answers

A ratchety sound is made while washing

I have a light load of wash and a "ratchety" sound occurs when washing and spin cycle. The sound stops when I lift lid or press stop. Seems to be washing alright and emptying.

Posted by on

  • Carmen Mikulic May 11, 2010

    hi there,



    you may just have a faulty bearing. can you provide me with the complete model # please?

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 409 Answers

Hi there,

just wondered if you fixed your problem.

thanks

Posted on Sep 26, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 943 Answers

Hi thanks for the question i would check the pump some foreign object could be caught

Posted on Sep 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Whirlpool washing machine make loud noise after spin cycle quits. Noise continues until cycle winds down. Sounds like a machine gun being fired


Hello,have to tell you that most noises from a washing machine occur during the spin cycle. If you hear loud thumping noise during the spin, the load of cloth may have become unbalanced. Stop the washer and redistribute the cloths, then restart the machine. Repeat these steps if necessary.

Thanks



Jun 04, 2010 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Noise hear during washing cycle?


Most noises from a washing machine occur during the spin cycle. If you hear loud thumping during the spin, the load of clothes may have become unbalanced. Stop the washer and redistribute the clothes, then re-start it. Repeat these steps if necessary.

Mar 28, 2010 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Machine does not agitate, will spin and rinse including.


Hi,does the top part of the agitator move freely when you move it by hand?Or does it catch,if it does not catch the the cogs other wise known as dog ears are worn out.Do not believe the little cogs that catch inside the top part of the agitator can be replaced.You may have to replace the whole agitator unit on some models they are around 40.00.

Apr 11, 2009 | Maytag PAV2300 Top Load Washer

1 Answer

Kenmore front-load washer stops at rinse cycle


When the washer initially fills for the wash, is it only hot water entering the drum? Try switching the water temperature between hot and cold as it fills. If any of them show little or no water getting through, it sounds too easy but check to make sure water supply taps are on, and that the cold/hot fill hoses aren't reversed. Remove the fill hoses and check any of the screen filters for blockage (in the hoses and in the inlet water valve). When the machine stops and waits to fill but all you hear is a hum, it sounds like there is power going to the valve but water is not able to get through it.
Good luck!

Mar 03, 2009 | Kenmore 43142 Front Load Washer

1 Answer

Loud noise


Most noises from a washing machine occur during the spin cycle. If you hear loud thumping during the spin, the load of clothes may have become unbalanced. Stop the washer and redistribute the clothes, then re-start it. Repeat these steps if necessary

Hope it may help you;

Regards;
VOTIT

Jan 29, 2009 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

Kenmore topload washer pumps water out but won't spin.


your basket drive has gone out on you.
cost high to repair

Nov 23, 2008 | Kenmore 24032\24036 Top Load Washer

1 Answer

Noisy Spin Cycle


hi there,

Most noises from a washing machine occur during the spin cycle. If you hear loud thumping/or sound
during the spin, the load of clothes may have become unbalanced. Stop the washer and
redistribute the clothes, then re-start it. Repeat these steps if necessary.

Jun 12, 2008 | Whirlpool LSR9434PQ Top Load Washer

1 Answer

Maytag Washing Machine Stops after wash cycle...


sounds as if you have abad contact in the timer
advance the timer to a different spin cycle and see if it spins
then bo back to where it stops
if it will spin in the other spin cycles but not where it stops the the timer will need to be changed

Apr 21, 2008 | Maytag Dependable Clean Top Load Washer,...

1 Answer

Washing machine


place it in spin do you hear it runnig at all???lift the top real quick to tell if its moving. if motors runing but kinda sounds loud and ratchety, like something broken. you probably have a bad motor coupling. part number 285753a

Mar 02, 2008 | Whirlpool LBR4132JQ Top Load Washer

1 Answer

Danby washing machine noisy only during spin cycle


hi there,

Most noises from a washing machine occur during the spin cycle. If you hear loud thumping/or sound
during the spin, the load of clothes may have become unbalanced. Stop the washer and
redistribute the clothes, then re-start it. Repeat these steps if necessary.

Jan 13, 2008 | Danby DWM99W Top Load Washer

Not finding what you are looking for?
Maytag PAV2300 Top Load Washer Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Al Clark

Level 2 Expert

290 Answers

Todd Marr
Todd Marr

Level 2 Expert

77 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...