Question about NetGear WGR614 Wireless Router

1 Answer

Reset router - NetGear WGR614 Wireless Router

Posted by on

  • leidner Sep 16, 2008

    My modem and my router were unplugged, can I just turn them back on or do I have to reset everything?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

There should be a small hole on the back, use a toothpick or a pen and hold the little button down for 10 seconds that should reset the router tp the orginal defalt settings.

Posted on Sep 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

5 Answers

Can i reset the router back to the default setting





  1. Locate the reset hole on the router. The button will be on the back or side of the router.


routerreset4.jpg


  1. Leave the router powered on.
  2. Use a paperclip (or similar) to press and hold in the reset button for 10 seconds.
  3. Remove the paperclip.
  4. Wait approximately one minute for the router to restart.

May 10, 2011 | Belkin F5D8236-4 Router

1 Answer

Setting up wireless password


The router can be set to factory default by performing either of these two steps:

Resetting the Router Using the Reset Button
Resetting the Router Using the Web-Based Setup Page

NOTE: Pressing the Reset button on the back of the router for 30 seconds will reset your router to its factory default settings. All of the settings of the router will then be erased and the router's IP address will become 192.168.1.1.

To perform a hardware reset on your Linksys router, follow these steps:
Resetting the Router Using the Reset Button
Step 1:
Take note of the current settings of the router before resetting.
Step 2:
Press and hold the Reset button of the router for 30 seconds.

3798-001.png

Figure 1: Location of the Reset button on a Linksys BEFW11S4 router.
NOTE: The image may vary depending on the model number of the Linksys device.

4030-022.png

Figure 2: Location of the Reset button on a Linksys WRT54GX router.

4030-024.png

Figure 3: Location of the Reset button on a Linksys WRT54GC router.
NOTE: If the image of your router looks different from the ones shown above, consult your router documentation.
Step 3:
If the normal reset does not work, try to press and hold the Reset button for three seconds. The Ethernet light should go OFF then back ON. Unplug and re-plug the router's power adapter while pressing the Reset button. Keep holding the reset until the power light stops blinking.
NOTE: The router must be powered ON when you press the Reset button.
To reset the router via its web-based setup page, follow the steps below.
Resetting the Router Using the Web-Based Setup Page
Step 1:
Access the router's web-based setup page. For instructions, click here.
NOTE: To learn how to access the router's web-based setup page using a Mac computer, click here.
Step 2:
When the router's web-based setup page appears, click Administration then click on Factory Defaults.

kb4008-004_en.png NOTE: If the screen on your router's web-based setup page looks different, click here.
Step 3:
Click on Restore Factory Defaults and select Yes.

kb4008-005_en.png Step 4:
Click OK.

kb4008-006_en.png


Related Articles:

Accessing the Router's Web-Based Setup Page
Setting-Up a Router with Cable Internet Service
Setting-Up a Linksys Router Using DSL Internet
Changing the Linksys Router's Password

Nov 12, 2010 | Linksys Wireless-G WRT54G Router

2 Answers

Cannot remember log in info


The router can be set to factory default by performing either of these two steps:

Resetting the Router Using the Reset Button
Resetting the Router Using the Web-Based Setup Page

NOTE: Pressing the Reset button on the back of the router for 30 seconds will reset your router to its factory default settings. All of the settings of the router will then be erased and the router's IP address will become 192.168.1.1.

To perform a hardware reset on your Linksys router, follow these steps:
Resetting the Router Using the Reset Button
Step 1:
Take note of the current settings of the router before resetting.
Step 2:
Press and hold the Reset button of the router for 30 seconds.

3798-001.png

Figure 1: Location of the Reset button on a Linksys BEFW11S4 router.
NOTE: The image may vary depending on the model number of the Linksys device.

4030-022.png

Figure 2: Location of the Reset button on a Linksys WRT54GX router.

4030-024.png

Figure 3: Location of the Reset button on a Linksys WRT54GC router.
NOTE: If the image of your router looks different from the ones shown above, consult your router documentation.
Step 3:
If the normal reset does not work, try to press and hold the Reset button for three seconds. The Ethernet light should go OFF then back ON. Unplug and re-plug the router's power adapter while pressing the Reset button. Keep holding the reset until the power light stops blinking.
NOTE: The router must be powered ON when you press the Reset button.
To reset the router via its web-based setup page, follow the steps below.
Resetting the Router Using the Web-Based Setup Page
Step 1:
Access the router's web-based setup page. For instructions, click here.
NOTE: To learn how to access the router's web-based setup page using a Mac computer, click here.
Step 2:
When the router's web-based setup page appears, click Administration then click on Factory Defaults.

kb4008-004_en.png NOTE: If the screen on your router's web-based setup page looks different, click here.
Step 3:
Click on Restore Factory Defaults and select Yes.

kb4008-005_en.png Step 4:
Click OK.

kb4008-006_en.png


Related Articles:

Accessing the Router's Web-Based Setup Page
Setting-Up a Router with Cable Internet Service
Setting-Up a Linksys Router Using DSL Internet
Changing the Linksys Router's Password

Nov 12, 2010 | Linksys WRT54G2 Wireless Router

1 Answer

Cant log on to router


If you have forgotten your router's password, please follow the instructions below to resolve your issue.

The router can be set to factory default by pressing the Reset button of the router and resetting through the router's web-based setup page. Pressing the Reset button on the back of the router for 30 seconds will reset your router to its factory default settings. Any settings on the router will be erased and the router's IP address will become "192.168.1.1," the username is still blank, and the password will be "admin."

To perform a hardware reset on your Linksys router follow the steps below.
Resetting the Router Using the Reset Button
Step 1:
Take note of the current settings of the device before resetting.
Step 2:
Press the Reset button of the router for 30 seconds.

3798-001.png Figure 1: Location of the Reset button of a Linksys BEFW11S4 router.
NOTE: If your router does not look like this, refer to the other images below:
4030-022.png Figure 2: Location of the Reset button of a Linksys WRT54GX router.
4030-024.png Figure 3: Location of the Reset button of a Linksys WRT54GC router.
NOTE: If the image of your router is different from the ones shown above, please consult your router documentation.
Step 3:
If the normal reset does not work, unplug then plug back the router's power adapter while pressing the Reset button.
To reset the router via its web-based setup page, follow the steps below.
Resetting the Router Using the Web-Based Setup Page
Step 1:
Access the router's web-based setup page. For instructions, click here.
NOTE: If you are using Mac to access the router's web-based setup page, click here.
Step 2:
When the router's web-based setup page appears, click Administration then Factory Defaults.
4008-003.png NOTE: If the screen on your router's web-based setup page looks different, click here.
Step 3:
Look for Restore Factory Defaults and select Yes.
4008-005.png Step 4:
Click 4268-009.png.

Nov 11, 2010 | D-Link DI 514 Wireless Router (DI-514)

1 Answer

The Cisco System logo just stays orange, I attempted to repair on my lap top but it won't let me repair.


The router can be set to factory default by performing either of these two steps:

Resetting the Router Using the Reset Button
Resetting the Router Using the Web-Based Setup Page

NOTE: Pressing the Reset button on the back of the router for 30 seconds will reset your router to its factory default settings. All of the settings of the router will then be erased and the router's IP address will become 192.168.1.1.

To perform a hardware reset on your Linksys router, follow these steps:
Resetting the Router Using the Reset Button
Step 1:
Take note of the current settings of the router before resetting.
Step 2:
Press and hold the Reset button of the router for 30 seconds.

3798-001.png

Figure 1: Location of the Reset button on a Linksys BEFW11S4 router.
NOTE: The image may vary depending on the model number of the Linksys device.

4030-022.png

Figure 2: Location of the Reset button on a Linksys WRT54GX router.

4030-024.png

Figure 3: Location of the Reset button on a Linksys WRT54GC router.
NOTE: If the image of your router looks different from the ones shown above, consult your router documentation.
Step 3:
If the normal reset does not work, try to press and hold the Reset button for three seconds. The Ethernet light should go OFF then back ON. Unplug and re-plug the router's power adapter while pressing the Reset button. Keep holding the reset until the power light stops blinking.
NOTE: The router must be powered ON when you press the Reset button.
To reset the router via its web-based setup page, follow the steps below.
Resetting the Router Using the Web-Based Setup Page
Step 1:
Access the router's web-based setup page. For instructions, click here.
NOTE: To learn how to access the router's web-based setup page using a Mac computer, click here.
Step 2:
When the router's web-based setup page appears, click Administration then click on Factory Defaults.

kb4008-004_en.png NOTE: If the screen on your router's web-based setup page looks different, click here.
Step 3:
Click on Restore Factory Defaults and select Yes.

kb4008-005_en.png Step 4:
Click OK.

kb4008-006_en.png


Related Articles:

Accessing the Router's Web-Based Setup Page
Setting-Up a Router with Cable Internet Service
Setting-Up a Linksys Router Using DSL Internet
Changing the Linksys Router's Password

Nov 09, 2010 | Linksys Wireless-G WRT54GS Router...

1 Answer

When my pc starts I get an error message concerning something missing in the dynamic link library. How do i fix this?


Try:
Resetting the Linksys Router to Factory Default

The router can be set to factory default by performing either of these two steps:

Resetting the Router Using the Reset Button
Resetting the Router Using the Web-Based Setup Page

NOTE: Pressing the Reset button on the back of the router for 30 seconds will reset your router to its factory default settings. All of the settings of the router will then be erased and the router's IP address will become 192.168.1.1.

To perform a hardware reset on your Linksys router, follow these steps:
Resetting the Router Using the Reset Button
Step 1:
Take note of the current settings of the router before resetting.
Step 2:
Press and hold the Reset button of the router for 30 seconds.

3798-001.png

Figure 1: Location of the Reset button on a Linksys BEFW11S4 router.
NOTE: The image may vary depending on the model number of the Linksys device.

4030-022.png

Figure 2: Location of the Reset button on a Linksys WRT54GX router.

4030-024.png

Figure 3: Location of the Reset button on a Linksys WRT54GC router.
NOTE: If the image of your router looks different from the ones shown above, consult your router documentation.
Step 3:
If the normal reset does not work, try to press and hold the Reset button for three seconds. The Ethernet light should go OFF then back ON. Unplug and re-plug the router's power adapter while pressing the Reset button. Keep holding the reset until the power light stops blinking.
NOTE: The router must be powered ON when you press the Reset button.
To reset the router via its web-based setup page, follow the steps below.
Resetting the Router Using the Web-Based Setup Page
Step 1:
Access the router's web-based setup page. For instructions, click here.
NOTE: To learn how to access the router's web-based setup page using a Mac computer, click here.
Step 2:
When the router's web-based setup page appears, click Administration then click on Factory Defaults.

kb4008-004_en.png NOTE: If the screen on your router's web-based setup page looks different, click here.
Step 3:
Click on Restore Factory Defaults and select Yes.

kb4008-005_en.png Step 4:
Click OK.

kb4008-006_en.png


Related Articles:

Accessing the Router's Web-Based Setup Page
Setting-Up a Router with Cable Internet Service
Setting-Up a Linksys Router Using DSL Internet
Changing the Linksys Router's Password

Nov 08, 2010 | Linksys Wireless-G WRT54G Router

2 Answers

I forgot my security key/pass phrase... nothing I do is coming up?


he router can be set to factory default by performing either of these two steps:

Resetting the Router Using the Reset Button
Resetting the Router Using the Web-Based Setup Page

NOTE: Pressing the Reset button on the back of the router for 30 seconds will reset your router to its factory default settings. All of the settings of the router will then be erased and the router's IP address will become 192.168.1.1.

To perform a hardware reset on your Linksys router, follow these steps:
Resetting the Router Using the Reset Button
Step 1:
Take note of the current settings of the router before resetting.
Step 2:
Press and hold the Reset button of the router for 30 seconds.
Step 3:
If the normal reset does not work, try to press and hold the Reset button for three seconds. The Ethernet light should go OFF then back ON. Unplug and re-plug the router's power adapter while pressing the Reset button. Keep holding the reset until the power light stops blinking.
NOTE: The router must be powered ON when you press the Reset button.
To reset the router via its web-based setup page, follow the steps below.
Resetting the Router Using the Web-Based Setup Page
Step 1:
Access the router's web-based setup page. For instructions, click here.
NOTE: To learn how to access the router's web-based setup page using a Mac computer, click here.
Step 2:
When the router's web-based setup page appears, click Administration then click on Factory Defaults.
NOTE: If the screen on your router's web-based setup page looks different, click here.
Step 3:
Click on Restore Factory Defaults and select Yes.

Aug 23, 2010 | Linksys Wireless-G WRT54G Router

2 Answers

How reset passsword.? router


Dear arliwave

It is easy to Reset Router than to locate its User name and password,
To reset your router, first of all switch on your router and press its reset button for 10 seconds. While with pressed reset button switch off power of router than after 5 seconds release the reset button. Now your router is reset to its default position.
At default its user name and password are " admin " .
For browsing to router site type http://192.168.1.1 or http://192.168.2.1 in your browser address bar.Enter by using admin as user name and password.

Thanks for sharing your problem with Fix Ya Family

Jul 29, 2009

Jul 11, 2009 | Zhone (6218-I2-200) Router

2 Answers

I cannot reset my router by pressing the reset


Check with your browser if the router has been reset. If not your unit must be replaced.

Apr 10, 2009 | NetGear WGR614 Wireless Router

Not finding what you are looking for?
NetGear WGR614 Wireless Router Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Routers Experts

Barry37

Level 1 Expert

31 Answers

MrNutsy

Level 1 Expert

36 Answers

Phillip Whisenant
Phillip Whisenant

Level 2 Expert

120 Answers

Are you a NetGear Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...