Question about NorStar T7316E Corded Phone

1 Answer

How too change time

I canot find out how to change time and date any idea??

Posted by on

  • spatriquin Sep 15, 2008

    does anyone know how to set time and date???

  • Carl Navarro
    Carl Navarro May 11, 2010

    What system is the T7316 plugged into?

×

1 Answer

Norstar Merdian Press Feature.
Enter "**8463".
Enter the password (default is 266344). The display shows
Hour: 01
Next Change
Select CHANGE. Display shows:
Hour: __
Cancel
Enter two digits for the hour. Chose AM or PM when Prompted.
Select NEXT.
The display shows:
Minutes: 00
Next Change
Enter the minutes.
Press the RLS button to end, or press NEXT to change the date.
The diplay shows:
Year: 99
Next Change
Enter the two-digit year.
Select NEXT and repeat to change the month and day.
Press the RLS key to save the time and date and exit programming.

Top of Page

Norstar Meridian CICS Time

  • Press "FEAT".
  • Press "*".
  • Press "*".
  • Press "266344" (CONFIG) or "23646" (ADMIN).
  • Enter password "23456" (ADMIN) or "72787" (SCPLUS).
  • You will see "Terminals & Sets".
  • Press "Next" five times.
  • Press "Show"
  • When you see "Hour", press "Change" or "Next" to skip.
  • Type in the hour using military time as a 2 digit number.
  • Press "Next".
  • When you see "Minutes", press "Change" or "Next" to skip.
  • Type in the minutes using a 2 digit number.
  • Press "Next".
Date:
  • When you see "Year", press "Change" or "Next" to skip.
  • Type the year in 2-digit format.
  • Press "Next".
  • When you see "Month", press "Change" or "Next" to skip.
  • Type the month in 2-digit format.
  • Press "Next".
  • When you see "Day", press "Change" or "Next" to skip.
  • Type the day in 7-digit format.
  • Press "Next".
  • When you see "End of List", Press "Rls" to exit.
Top of Page

Nortel Norstar Telephone Systems Changing the time on a Norstar system must be done using a display phone. Using a M7310 or T7316 the right 2 buttons under the display are "NEXT" and "SHOW" respectively.
  1. To enter programming mode press "FEATURE" and "* * 2 6 6 3 4 4"
  2. Enter password (default = 266344) - display should read "Terminals & Sets"
  3. Press "NEXT" 5 times - display should read "Time and Date"
  4. Press "SHOW" - display should read "Hour:___"
  5. Press softkey "CHANGE"
  6. Enter hour - display should read "AM OK or Change"
  7. Select AM or PM
  8. Press "NEXT" - display should read "Minutes:___"
  9. Press softkey "CHANGE"
  10. Enter minutes
  11. Press "NEXT" - display should read "Year:___"
  12. Press softkey "CHANGE"
  13. Enter year
  14. Press "NEXT" - display should read "Month:___"
  15. Press softkey "CHANGE"
  16. Enter month
  17. Press "NEXT" - display should read "Day:___"
  18. Press softkey "CHANGE"
  19. Enter day
  20. Press "NEXT"

Posted on Oct 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i change the time


The time and date are programmed through system programming. A 4015 phone cannot do this programming. A 4150 phone setup as a subattendant phone with the "attendant setup time/date" class of service option enabled for the 4150's class of service can change the system time and date. This is accessed through the LCD touch screen keys of the 4150. Scroll through the options in the screen until you find set time /date.
Also an attendant console with the "attendant setup time/date" class of service option enabled for its class of service can change the time and date. Press the function button then choose attendant function.
Choose set time. Enter the time in four digits as in 0800 for 8:00. Choose PM if needed. Choose set.
Choose exit to finish.

Dec 13, 2010 | Mitel Superset 4015 Corded Phone

1 Answer

I need to change the time.


Must be done on a MLX20-L

Changing the time on a Avaya Merlin Magix system is accomplished from the system programming console. The date is change separately from the time.
Changing the date:
1. Press Menu
2. Press System Program
3. Press Exit or Start
4. Press System
5. Press Date
6. Enter the date as: mmddyy where mm = month, dd = day, yy = year
7. Press Enter
8. Press Exit or Back
9. Press Home or Exit
Changing the time:
1. Press Menu
2. Press System Program
3. Press Exit or Start
4. Press System
5. Press Time
6. Enter the date as: hhmm where hh = hours & mm = minutes
7. Press Enter
8. Press Exit or Back
9. Press Home or Exit

Nov 02, 2009 | Avaya MLX 5D Corded Phone

1 Answer

Can't find my manual and need to reset the date and time


if system DK series must set at port "00"
#402 to check the port number with displayed phone
#651 DDMMYY - for date
#652 HHMMSS - for time
#653 to change the day

Apr 08, 2009 | Toshiba DKT3010SD Corded Phone

1 Answer

Set time and date toshiba dkt2010-s


DK Programming
From Reception phone only
--(time set)DK- intercom #652 HH mm SECs redial
--(date Change)- intercom #651 yy mm dd redial
CTX Programming
--(time set)ctx-intercom #652 HH MM SEcs #
--(date change)-intercom #651 YY MM DD #

Jan 10, 2009 | Toshiba DKT2010SD Phone

1 Answer

Changing the date and time


Do you have the ADMIN password? If so you cna change the time and date by logging into the system, press next until you get to " Time and Date " and change it there. If you do not have the ADMIN password please let me know and I'll try to help. ....Mitelmike

Nov 04, 2008 | NorStar M7310 Corded Phone

2 Answers

NEC Dterm80- I need to change the date


On the adminstrator's phone (usually ext 100, 101, 110 or 10)

Do not lift handset
Press the FEATURE button
Dial 9#
Enter the hour & minutes (ex:01:25) using the dialpad
Press RECALL button to change AM/PM setting
Press HOLD to change the calendar setting
Press FEATURE button again to save & exit
Hope it works for you

Nov 03, 2008 | NEC Dterm DTP 16D-1 Corded Phone

1 Answer

Panasonic KX-T7730 Corded - change display


On mine I press the asterix to toggle display options

Mar 31, 2008 | Panasonic KX-T7730 Corded Phone

5 Answers

Date/time change


Press program
then 0
(this will then display current date and time - overtype as follows)

eg. for Friday 2nd November 2007 8:58 am you type the following

071102 (date backwards) [space] 5 (Friday is 5th day of week) [space] 0858 (time) [space] 0 (0 is am, 1 is pm)

Press the store button and then program button to exit the programming.

Oct 30, 2007 | Panasonic KX-T7730 Corded Phone

3 Answers

CHANGE THE TIME/DATE AND TURN THE RINGER ON


You have to use the feature 9 # from the administrators phone (usually extension 100)
Go to extension 100, press "feature,9,#" and you'll see the numbers on your display blinking like a digital alarm clock. Enter the time and then press feature to complete.

Oct 11, 2007 | NEC DTU 8D-2 Corded Phone

1 Answer

Change Time and Names


On your Intertel Encore system you can program from a phone at extension 20. Intertel does not allow the sale of the manual to end-users (you) only Intertel dealers have access. I can help with the time change: From EXT 20 press the PROGRAM key, use the arrow keys to scroll until "System Programming" is displayed. It will ask for the password. The default is 1111, if it's been changed you may be in trouble... You would then select "System" then Select "Time and Date" - change the time (24 hour format) and date (MMDDYY) then hit the SPEAKER button to complete programming. I hope this helps. I have not done this myself, just passing on the instructions.

Jan 30, 2007 | Inter-Tel Encore 618.4001 Phone

Not finding what you are looking for?
NorStar T7316E Corded Phone Logo

851 people viewed this question

Ask a Question

Usually answered in minutes!

Top NorStar Lands Phones Experts

george  peters
george peters

Level 3 Expert

858 Answers

kakima

Level 3 Expert

98868 Answers

dan4261

Level 1 Expert

14 Answers

Are you a NorStar Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...