I have a 2005 dodge magnum with check engine light on and i got a code that is P406 what does it mean and how do i fix it

check out your code at http://engine-codes.com

what are the codes coming up

Hello I have a 2007 Magnum 2.7L that has code p0302 cylinder#2 misfire seems to have coolant loss but can find no leaks. Recently had another code p0300, so both are active check engine light started flashing but stop and stayed solid. Not driving it. Replaced spark plugs should I replace coils? Any feedback please.

This problem can sometimes occur due to dirt entering the throttle assembly. It can bring codes on relating to forced engine shutdown, which sounds dramatic at best. Normally a good cleaning of the throttle valve assembly cures this fault. It happens because the system fails to see throttle response or closure within parameters. This should be your first action to take, rather than spending money needlessly... Hope this helped?

the esp stands for electronic stability program,you will need to have the computer scanned for codes, these codes will help in the repair,you may have a bad speed sensor or the check engine light may have shut down the esp,when the engine detects a problem it shuts down the esp because it feels that the esp cant operate correctly when the engine is not running correctly,so the first thing is to scan for the codes, hope this helps, good luck,

how do i turn the oil light off in my 2005 dodge magnum?

Take it to a mechanic.

you need to see what the eng lite for if there is a trans codes usually the pcm wont let the speed go over 40 stays in safe mode untill you fix the problem or change the sensor,for the esp you need to chage the esp sensor and recalibrate by the dealer

Go to the following page to view more information on your EGR Valve:

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152800ba857

Hope you find what you are your looking for! Good Luck!
If you have any more problems let me know.

Thank you for using Fix Ya!

Don't forget to rate the overall satisfaction of this answer!

take it to autozone or advance auto to have the check engine light code read for free. take a pen and paper to write down whatever it is and we can go from there.