Question about Canon PIXMA MP530 All-In-One InkJet Printer

3 Answers

Canon Pixma MP530 multifunction printer

Recurrent error message 5C10. Significance? All printing stops when message appears.

Posted by on

  • romania07 Sep 15, 2008

    When I held the power button on, it only beeped once despite holding it for as long as one minute. After printing a couple of documents, the error message 5C10 reappeared.

  • Edison Hard Aug 15, 2012

    I have tried some solutions online and found this site,http://resetprinters.com/how-to-reset-ca... --it did work for me! :)

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,952 Answers

Issue: ERROR LCD: Error code (5xxx through 9xxx) appears on the display

1. Press ON/OFF switch to reset the multifunction device 2. Press Stop/Reset and ON/OFF to reset the printer 3. The MP530 may require repair



else try

Had to move the printer cartridge and shut down three times, but itfinally kicked in and started working again. Don't give up just tryingit once.

else try

Move the cartridge holder back to the right manually, but carefully - close lid and turn the printer off, then on again.

Posted on Sep 15, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 3,422 Answers

HI,

1.Power off the printer

2, Unplug the printer's power cord, wait 5 seconds then replug the power cord in.

3, Hold the Power button for 6 Beeps

4, Release the Power Button



Posted on Sep 15, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,029 Answers

1. Press ON/OFF switch to reset the multifunction device
2. Press Stop/Reset and ON/OFF to reset the printer if it still continues then check the ink cartridges and clean the printer also checked the nozzles to be sure that they were clean and cleaned the area where the cartridges set

Posted on Sep 15, 2008

  • Starnley Johnwells
    Starnley Johnwells Sep 17, 2008

    pls dont forget to rate the solution

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Canon PIXMA MP530 printer and showing an Service Error 5C10. What is that error? It will not print and the Alarm light flashes.


disconnect it from power for 10 minutes and also check for jammed paper. That should do the trick
Rob
Ps. Thanks for ratings.

Mar 02, 2011 | Canon PIXMA MP530 All-In-One InkJet...

1 Answer

I am trying to print on my Canon MP830 and I have had two error messages. 5C10 and 5100. I don't know what these errors are can you please help?


There seem to be a number of involved suggested fixes for the 5C10 error code.

Please go to this web page, and click the "Service and Support" link.
This will display a "Please enter your question" field. Type "5C10" into the field and click the Search button.
The first entry displayed will be a link to "ERROR LCD: Error Code 5C10" -- click the link
Three new links will eventually display:
  • Press ON/OFF switch to reset the multifunction device
  • Removing paper jams MP800R / MP830 / MP530
  • The MP830 may require repair

Click each link to see if the solution provided is appropriate to your situation.

Jan 05, 2011 | Canon PIXMA MP830 All-In-One InkJet...

1 Answer

Service error 5c10


This error is a message indicating print head/ink failure on the printer.
I would try the following 2 things:
1. replace the ink cartridges/print heads. test to see if the problem is fixed.
2. If this does not solve the issue, you may need to either send it to the manufacturer for repairs (if under warranty), send it to a local repair person to service- or look for a new printer to buy (which may actually save you money).

Jun 30, 2010 | Canon PIXMA MP530 All-In-One InkJet...

1 Answer

Getting service error problem 5C10 on my Canon MP 530 printer.


Hi,

You can send the printer to Canon to get the bad hardware replaced, if you dont want to buy a new printer.

But I would suggest to go for a new one.


Read more: http://www.justanswer.com/questions/31lbp-canon-pixma-mp530-printer-service-error-5c10#ixzz0kQt5g95l

Apr 07, 2010 | Canon PIXMA MP530 All-In-One InkJet...

1 Answer

Error message : service error 5c10 on a canon


You can try and clear the error by holding down the power button and waiting for it to turn off then wait 30 seconds and turn it back on. {you might need to unplug it to get it to turn off}

or

Hold down the stop/reset and then push the power button while the printer is on. The printer should shut off then wait 30 seconds and then hold the stop/reset again and push the power button and the printer should turn on with the error cleared.

Apr 05, 2010 | Canon PIXMA MP530 All-In-One InkJet...

1 Answer

Canon MP530 Error 5C10 showing. Can't find print booklet. Help


Can't solve it, but I have it. My Canon has not booklet print option when it's used as a wetwork printer, but it does when it's connected directly. Why?

Mar 04, 2010 | Canon PIXMA MP530 All-In-One InkJet...

1 Answer

I have an MP530 printer - error message 5C10 is


You could try resetting the printer:

1) On the panel, press and hold the <On/Off> button until the display goes blank (approx. 1 second). If the display does not go blank, unplug the power cord.

2) Wait approx. 10 seconds, plug in the power cord (if removed in previous step), press the <On/Off> button to power on the unit.

3) Wait for the printer to cycle through its startup routine before trying another print job.

I hope this helps!

Jan 05, 2010 | Canon PIXMA MP530 All-In-One InkJet...

1 Answer

Error code 5C10


From Canon. Issue: ERROR LCD: Error Code 5C10

1. Press ON/OFF switch to reset the multifunction device 2. The MP530 may require repairI would remove the print head and inks,unplug it completely from thr eall for a half hour.Plug it back in and install everything.

Jun 17, 2009 | Canon PIXMA MP530 All-In-One InkJet...

Not finding what you are looking for?
Canon PIXMA  MP530 All-In-One InkJet Printer Logo

171 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts

kakima

Level 3 Expert

96518 Answers

old marine
old marine

Level 3 Expert

1464 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...