Question about Kenmore 40494 / 40495 / 40499 Electric Single Oven

2 Answers

Oven does not work

When pushing the bake or the broil to turn on it comes up E1 F1 . I do not know what this means and i can not find manual. It is a kenmore glass top oven and is about 10yrs old. Not sure if these have fuses in them or where. Cleaned oven and only worked once after. Can you help me with this problem?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How do you reprogram oven, when it gives you an F1 error. Top broiler will not cut off, I've unplugged the stove for about 3 min and plugged it back in and the top broiler still came on. Still have stove turned off.

Posted on Dec 26, 2009

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

According to the manual, the self cleaning latch could be stuck.

If the oven door is open, press STOP/CLEAR to clear display, then depress and hold switch plunger for 6 seconds (Located in the upper right corner of the oven front) and the oven door will unlock.

If the oven door is locked, press STOP/CLEAR to clear the display then apply pressure to the upper right corner of the oven door and the door will unlock. If the "F" code reappears, contact a Sears trained repair specialist.

Posted on Sep 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Frigidaire oven fefl68 broil element comes on on broil only will not come on on bake or clean


Hello - - If you are referring to the bake element, but the broil element works then you would need to just replace the bake element. If both your bake and broil element does not work, then there might be a problem with the wiring communication. However, if the oven does not bake and/or broil but the cook top works; contact a professional to diagnose the EOC (electronic oven control).

Nov 17, 2012 | Ovens

1 Answer

The oven does not work it says turn off when i turn it on and flashes F1 and E1 codes


Hello,

The E1-F1 error code means per the service manual "safety flip flop" what that means that a internal component of the control board has failed and thusly the control board would need to be replaced

GENE

Oct 25, 2011 | Ovens

2 Answers

Ran self clean now oven will not heat up


Turn the breaker off for 5 minutes then turn it back on see if this helps if not let me know.

Sep 27, 2011 | Whirlpool RBS305PRS Stainless Steel Oven

1 Answer

My oven wont heat up?


Hello there:
first chevck to see if the broil feature will work but if both the broil and bake feature does not work meaning it will not heat up if you have selected either the bake or broil follow these solutions that i have provided for you .
It won't bake or broil If neither the bake nor the broiler heating elements heat, but the range burners still work, the clock may be set for a timed or self-cleaning cycle. Check to be sure the clock buttons and knobs are set properly. If your clock has a knob that says "push for man(ual)", push the knob in and try the baking and broiling elements again. If it still does not operate properly, you probably have a defect in the thermostat, selector switch, or common wiring. If the oven does not have a separate bake/broil/etc. selector switch, the problem may be with the thermostat. But it's not easy to check the selector switch or thermostat for proper operation. If you suspect a problem in this area, call a qualified appliance repair technician.



Jul 13, 2010 | Hotpoint SY36 Style Line Stainless Steel...

1 Answer

I cannot use the oven


F1-E1 - EEPROM Checksum Error - Disconnect power for at least 30 seconds and then reconnect.
Allow at least a minute after power has been restored and if error code reappears, replace control board (clock).


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question
@#$%

Jun 29, 2010 | Kenmore 47712 / 47714 / 47719 Electric...

1 Answer

Heating elements will not heat and getting an error code E1 F-5


Hello,the lock latch is located directly in the center upper portion of the door. It is a hook shaped latch that lock by turning downward. This lock gets stuck in this position which causes the e1 f5 error code. Locate the latch through the vent holes in the upper front of the oven door. Insert flat headed screw driver into vent hole and gently push latch up to a horizontal position & simply open door. Once unlocked, push cancel on the control panel.This will clear the error code and resolve the issue.

Thanks

May 30, 2010 | Whirlpool Ovens

1 Answer

Whirlpool oven timed bake feature dosn't work.


F1-E1 - EEPROM Checksum Error - Disconnect power for at least 30 seconds and then reconnect.
Allow at least a minute after power has been restored and if error code reappears, replace control board (clock).


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question
@@@@

Oct 25, 2009 | Whirlpool RBS275PD Electric Single Oven

1 Answer

What does the F1 alert mean?


Hello jiverson,
Welcome,

You said, your get a recurring F1 beep even after I press "cancel" I worked with the oven for about 2 hours trying various combos of opening the oven, pressing cancel and trying to perform various functions (light, clean, bake, broil, etc.) to no avail. I got it to stop for about an hour at one point, but it started right back up again. It also seems that every now and then the oven light will come on all by itself during one fo these alerts

Please send me your complete model number including the single diget at the end of the model number.
For example: FGB24S5AW1
Then I can be sure!!!!!!!!!!!
Waiting your response. I'll check for it through out the day!
And get back to you as fats as possible so you can take care of it Monday!

Huuum

In some ovens It could be failure of your, EOC (Electronic Oven Control) failure

Oct 19, 2008 | Frigidaire FGB24S5A Gas Single Oven

Not finding what you are looking for?
Kenmore 40494 / 40495 / 40499 Electric Single Oven Logo

347 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Ovens Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Kenmore Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...