Question about Epson LX-300 Matrix Printer
Please help me, I want to change the font for Epson LX-300+. I already push the font button but it can't work at all. Thank you for your help.
Please answer me through e-mail: firstname.lastname@example.org.
Please hold 3 second in pause botton . Then to change font.. <!-- from fixya rte -->
Posted on Aug 17, 2010
Fonf size Automaticaly Change -AKR EXPRESS
Posted on Mar 15, 2013
Unfortunatelly you can not change the fontsize of the printer, but you can change the font.
To do this hold Pause button for 3 seconds, then push Font button. Two lights will light on and then off and will show you the current settings of the font. To change the font just click repeatedly the font button untill you reach the desired font following the combinations of light on the table below.
The fontsize is controled by the software you use.
Posted on Oct 08, 2011
yes you can change the font tray to print the printer internal setting tray that press and hold any key by tarn the printer off then on after you tarn the printer on release the key
Posted on Sep 06, 2008
have you check the white cable? (from the printer head to the
mainboard) .If the white cable is ok and you confirm that the
printer head is fine, then the problem is at the mainboard.
most problems like this that i had encountered is at the transistor
at the mainboard. Try to check it out using a multitester.
Posted on Sep 08, 2008
Tips for a great answer:
May 08, 2014 | Epson LX-300 Matrix Printer
Oct 06, 2011 | Epson LX-300 Matrix Printer
Jun 27, 2010 | Epson LX-300 Matrix Printer
Mar 24, 2010 | Epson LX-300 Matrix Printer
Sep 08, 2009 | Epson LX-300 Matrix Printer
Oct 27, 2008 | Epson LX-300 Matrix Printer
Sep 06, 2008 | Epson LX-300+ II Matrix Printer
Mar 16, 2008 | Epson LX-300 Matrix Printer
20,700 people viewed this question
Usually answered in minutes!