Question about Operating Systems

1 Answer

Cpu up grade on MSI 6378 motherboard can I use 1.5 G unit instead of 1.3 as listed on data sheet

Spikeg

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 214 Answers

Hi, didn't get the question

Posted on Sep 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My PC cannot login to windows xp says no signal


Test your PSU power supply unit or replace it if your power supply units fan is not working your PSU is faulty http://pcsupport.about.com/od/toolsofthetrade/f/powersupplytest.htm One bad lead can cause a computer to continue on a cycle of restarting or to shutdown or fail to detect/ boot up a computer hard drive WARNING: Before you start troubleshooting remember that you are dealing with electricity that can KILL. http://www.kitchentablecomputers.com/static.php - rules Only work inside the computer case when the power has been switched off and disconnected. Never open the power source. Some of the below steps recommend removing physical parts within the computer. While in the computer it is highly recommend that you be aware of ESD and its potential hazards Test all leads that attach to your hard drive power and data cables IDE SATA the leads from your MOTHERBOARD TO YOUR HARD DRIVE make sure they have a secure dust free connections and are not faulty or just replace them they could be faulty Make sure all leads that are attached to your dvd\cd floppy drives have secure connections and are not faulty or just replace them they could be faulty. Computers need power and data to travel through every working device to continue its cycle and have an end so any faulty leads will end up with a computer error. Even something as small as a faulty electrical or fan lead can cause you problems Motherboard and a Hard Drive any leads between them will fail before your motherboard or your hard drive if its a flat ribbon 40 pin type IDE replace it this will be the first to fail. Check all electrical power input and extensions make sure they are securely seated even the cd/dvd floppy drives need to have current go through make sure these drives are working also check the Cmos battery and computer RAM modules make sure they are securely seated with no dust built up or in the sockets on some motherboards cmos batteries are soldered in. Check you CPU central processing unit make sure its securely seated and has thermal paste it might be getting to hot the thermal paste will help disperse the heat Thermal compound is a sticky paste that is placed directly onto the CPU. http://www.hardwaresecrets.com/article/Thermal-Compound-Roundup-February-2012/1490 Allowing for a more direct heat transfer between the CPU and HEAT SINK and preventing air gaps from forming between the CPU and heat sink. Another possible reason could be a memory dump you might be running to many programs at the one time putting to much strain on the CPU central processing unit. If you can get your computer stable enough scroll to bottom toolbar bottom of screen right click select task manager applications you will see whats running if you see anything you dont need running select end now also under processes see what is ticking over again if you see something you don't need to be running end now or you might uninstall that program and some unnecessary programs not having enough computer ram can cause memory dumps If you are not sure if a module is right for your system use the Crucial Memory Advisor tool for a list of guaranteed compatible modules. first you will need to select the manufacturer from a drop down list then select your product line from a drop down list then select the model then click find it will take you directly to compatible ram also you will have an option to scan your system you should always for a guarantee on any ram modules when purchasing them or buy working pairs if possible. You might have a virus or malware. Download at least one of these of course it will depend on your operating system. http://www.majorgeeks.com/Microsoft_Security_Essentials_for_Windows_d6242.html microsoft security essentials your operating system must be registered Win7/Vista/XP 64 bit http://majorgeeks.com/downloadget.php?id=4281&file=1&evp=dbb3b0aebe6a6a4ff18089a6489a5e62 anti malware free edition Win XP/2003/Vista/Windows7 http://windows.microsoft.com/en-US/windows/products/security-essentials/product-information malware protection http://100-downloads.com/download.php?p=615 windows xp microsoft security essentials http://100-downloads.com/download.php?p=614 windows 7 microsoft security essentials Hope this helps.

Dec 14, 2012 | Operating Systems

1 Answer

My computer does not boot up properly , a device listing on black screeen comes .


which device listing comes up ?

WARNING: Before you start troubleshooting remember that you are dealing with electricity that can KILL.

http://www.kitchentablecomputers.com/static.php - rules


Test all power and data leads that attach to your hard drive IDE,SATA

the leads from your (motherboard to your hard drive) make sure they have secure dust free connections and are not faulty


if its a 40 pin flat ribbon type it will be the first to fail


make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty


even something as small as a faulty electrical fan and its lead can cause you problems

computers need all power and data to continue through every working device and to have an end so any faulty leads will end up with a computer error


make sure your graphics card is securely seated with no dust built up or in the socket

if you remove your graphics check the socket to make sure its dust free


restart your computer then reinstall it this should activate found new hardware wizard


if you need more help with this post a reply

hope this helps

Oct 07, 2012 | Microsoft Windows XP Professional...

1 Answer

Red light is flashing when cpu is switched on hp pantium4 windows xp


Test your PSU power supply unit or replace it if your power supply units fan is not working your PSU is faulty



One bad lead can cause a computer to continue on a cycle of restarting or to shutdown or fail to detect/ boot up a computer hard drive



Test all leads that attach to your hard drive power and data cables IDE SATA

the leads from your MOTHERBOARD TO YOUR HARD DRIVE make sure they have a secure dust free connections and are not faulty or just replace them they could be faulty


make sure all leads that are attached to your dvd\cd floppy drives have secure connections and are not faulty or just replace them they could be faulty


computers need power and data to travel through every working device to continue its cycle and have an end so any faulty leads will end up with a computer error


even something as small as a faulty electrical or fan lead can cause you problems



motherboard and a hard drive any leads between them will fail before your motherboard or your hard drive if its a flat ribbon 40 pin type IDE replace it this will be the first to fail



check all electrical power input and extensions make sure they are securely seated even the cd/dvd floppy drives need to have current go through make sure these drives are working



also check the Cmos battery and computer RAM modules make sure they are securely seated with no dust built up or in the sockets on some motherboards cmos batteries are soldered in


check you CPU central processing unit make sure its securely seated and has thermal paste it might be getting to hot the thermal paste will help disperse the heat

Thermal compound is a sticky paste that is placed directly onto the CPU.


Allowing for a more direct heat transfer between the CPU and HEAT SINK and preventing air gaps from forming between the CPU and heat sink.

hope this helps

Aug 13, 2012 | Microsoft Windows XP Professional

1 Answer

Sounds drivers for a samsung computer that dont make system crash


sound drivers should not make your computer crash it must be a another problem

Test all power and data leads that attach to your hard drive IDE,SATA
the leads from your MOTHERBOARD TO YOUR HARD DRIVE make sure they have secure dust free connections and are not faulty or just replace them they could be faulty

motherboard and a hard drive any leads between them will fail before your motherboard or your hard drive if its a flat ribbon 40 pin type IDE replace it this will be the first to fail


make sure all leads that are attached to your drives dvd\cd floppy have secure dust free connections and are not faulty or just replace them they could be faulty a computer needs



power and data to travel through every working device and to continue its cycle and have an end so any faulty leads will end up with a computer error



even something as small as a faulty power lead or fan lead can cause you problems

computers need all of the data and electrical current to travel through every working device and to have an end to be able work properly



make sure ram modules and cmos batteries have dust free secure seatings and cmos battery has charge some motherboards cmos batteries are soldered in



you might not have enough computer ram

not having enough computer ram will run your computer over its limits putting to much strain on the CPU central processing unit and can cause memory dumps



you might have to many programs trying to or accessing the internet at the same time
scroll to bottom toolbar (bottom of screen) right click select task manager

applications you will see whats running
if you see anything you dont need running select end now and you might uninstall that specific

program if you or computer does not require it to run and
some unnecessary programs that could be jamming up your computer

also under processes see what is ticking over in the background again if you see something you
dont need to be and users you will see who is using your computer

you might need to add more computer ram
if you're not sure if a module is right for your system use the

Crucial Memory Advisor tool for a list of guaranteed compatible modules. first you will need to select the manufacturer from a drop down list then select your product line

from a drop down list then select the model then click find it will take you directly to compatible ram also you will have an option to scan your system



might be getting hot

check you CPU make sure its securely seated and has thermal grease

http://www.hardwaresecrets.com/article/Thermal-Compound-Roundup-February-2012/1490


hope this helps

Jul 17, 2012 | Operating Systems

3 Answers

Where I can get diver for motherboard MSI MS-7528 ver 1:0


Hello
Drivers for the MSI G31M3-F (MS-7528) can be downloaded here.

If this helps to solve your problem then please take a moment to rate this post - thanks.

Good Luck

Jan 08, 2011 | Operating Systems

1 Answer

SIR I NEED MOTHER DRIVERS OF MSI VER.1 7142 FULL


http://www.dl4all.com/79g/tag/MS+7142+Ver+1+msi+v+class+motherboard+driver.html

Nov 27, 2010 | Operating Systems

1 Answer

I can't format the cpu..


You can't format CPU, you can only format the Harddrive(HDD)!!!
The CPU is the "Central Processing Unit" it does not store any data, it just process the data from the HDD on a PC/Laptop.

Nov 01, 2010 | Operating Systems

1 Answer

Hi... Can you help me in the software of my pc the Video Controller (VGA Compatible) It was gone when I was reformat the PC. Motherboard Manufacturer: Company Name Micro-Star International Motherboard...


Field Value North Bridge Properties North Bridge SiS 661FX Revision 11 Memory Timings CAS Latency (CL) 2.5T RAS To CAS Delay (tRCD) 3T RAS Precharge (tRP) 3T RAS Active Time (tRAS) 5T Memory Slots DRAM Slot #1 256 MB (DDR SDRAM) DRAM Slot #2 512 MB (DDR SDRAM) Integrated Graphics Controller Graphics Controller Type SiS 330 Mirage Graphics Controller Status Enabled Graphics Frame Buffer Size 32 MB AGP Controller AGP Version 3.05 AGP Status Enabled AGP Device SiS 330 Mirage Integrated AGP Aperture Size 64 MB Supported AGP Speeds 1x, 2x, 4x, 8x Current AGP Speed 8x Fast-Write Not Supported Side Band Addressing Supported, Enabled Chipset Manufacturer Company Name Silicon Integrated Systems Corporation

Jul 16, 2010 | Microsoft Windows XP Professional SP2

2 Answers

Excel work sheets delete,pls how is it restore


Easiest way would be to use the Undo function to work your way back to the point prior to deleting the worksheets. If you can't back up through the list that far, you could close the file WITHOUT SAVING IT, then reopen the original file again. If you have already saved the document after deleting the worksheets, you will have to restore it from a backup (you do perform backups, right?) and continue working fro there.

Apr 15, 2009 | Microsoft Operating Systems

2 Answers

Cache memory


A cache is a temporary storage area where frequently accessed data can be stored for rapid access. Once the data is stored in the cache, future use can be made by accessing the cached copy rather than re-fetching or recomputing the original data, so that the average access time is shorter. Cache, therefore, helps expedite data access that the CPU would otherwise need to fetch from main memory.

A cache is a block of memory for temporary storage of data likely to be used again. The CPU and hard drive frequently use a cache, as do web browsers and web servers.

A cache is made up of a pool of entries. Each entry has a datum (a nugget of data) which is a copy of the datum in some backing store. Each entry also has a tag, which specifies the identity of the datum in the backing store of which the entry is a copy.

When the cache client (a CPU, web browser, operating system) wishes to access a datum presumably in the backing store, it first checks the cache. If an entry can be found with a tag matching that of the desired datum, the datum in the entry is used instead. This situation is known as a cache hit. So, for example, a web browser program might check its local cache on disk to see if it has a local copy of the contents of a web page at a particular URL. In this example, the URL is the tag, and the contents of the web page is the datum. The percentage of accesses that result in cache hits is known as the hit rate or hit ratio of the cache.

The advantage of cache memory is that the CPU does not have to use the motherboard’s system bus for data transfer. Whenever data must be passed through the system bus, the data transfer speed slows to the motherboard’s capability. The CPU can process data much faster by avoiding the bottleneck created by the system bus

Jul 17, 2008 | Microsoft Windows Server Standard 2003 for...

Not finding what you are looking for?
Operating Systems Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Operating Systems Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Prashant  Sharma
Prashant Sharma

Level 3 Expert

1127 Answers

Are you an Operating System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...