Question about PC Laptops

1 Answer

Please help how can I set up my wireless netgear wpnt834 does not get the internet

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 65 Answers

You may try Mac Cloning if you have Cable Internet connection. If you have DSL Internet connection, then set the router to PPPoE or change its LAN IP or local IP address to a different one; 192.168.2.1, to avoid IP address conflict with the DSL modem.

Posted on Sep 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Asus 4g will not connect with netgear router using WPA-PSK Protected access Pre-shared Key


Connect a LAN cable from the Netgear to the LAN port on your computer, open a browser and enter the Netgear configuration URL -
http://192.168.0.1
The default login = admin
The default PW = password You can now change the default admin password and configure the wireless settings.
Go to the wireless configuration and set up the SSID and WPA or WPA2 encryption to protect your wireless network and Internet from unauthorized access.
Now apply these settings to the wireless card in your laptop/computer.
To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Apr 16, 2013 | ASUS Eee 4G Notebook

1 Answer

Wireless connection


Turn off the laptop, unplug, remove battery, plug in. Push and hold the reset button for 30 seconds or so on the Netgear to reset to default settings. Boot laptop, when boot is complete, Open Network and Sharing Center, click on Manage Wireless networks, remove your OLD wireless network. Close Network and Sharing Center. In your Tray Notification Area , left click on the network icon, select unsecured Netgear Wireless Network. When connected, reconfigure SSID and Security Password.

Dec 16, 2012 | Acer Aspire 5742Z-4200 Notebook

1 Answer

Netgear router N 300 cannot connect to the internet using laptop


There are many router related settings on NETGEAR wireless router and if these are not configured properly, then issues such as router not connecting to Internet might come up. All NETGEAR wireless router users facing router not connecting to Internet are suggested to verify the router related settings such as access points and reconfigure them if required. Users are also advised to check the firewall settings on the system and ensure that they are not blocking the connection.

Jul 03, 2011 | PC Laptops

1 Answer

I bought a netgear from someone to hook to my hughes net modem & hav no idea how to begin to get it hooked up


I rcommend you RESET your Netgear router first.
To RESET the Netgear, power up the Netgear then press andhold the RESET button at the back of the router until all the LEDs flash. Connect a LAN cable from the Netgear to the LAN port on yourcomputer, open a browser and enter the Netgear configuration URL -
http://192.168.0.1
The default login = admin
The default PW = password You can now change the admin password and configure thewireless settings.
Go to the wireless configuration and set up the SSID and WPA or WPA2encryption.
Apply these settings to the wireless card in your laptop/computer.

To secure your wireless network from unauthorized access, please click on thislink and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Jun 12, 2011 | PC Laptops

2 Answers

My laptop was wiped clean by IT. It no longer recognizes my netgear router WNR2200 password ADCD292B IP address 75.205.121.194 Serial # 1SL5077200018


Hi jayw452, contact your local helpdesk it could be that the wireless profile for your connection at your netgear router needs to be reconfigured.
Also don't post passwords for wireless connections on the Internet, you may be compromising the network connection by giving all of that information.
Hope that helps.

Mar 03, 2011 | PC Laptops

1 Answer

I need a secure connection


Contact NetGear TechSupport, they will walk you through over the phone and connect to your computer over the internet (if you have wired internet to laptop already to assist with setup of Wireless Security.

ask for level 2 support, otherwise you will spend first 30 minutes talking to someone reading from a manual asking you non-essential questions.

Support is free if your router is still under its warranty.

http://kb.netgear.com/app/answers/detail/a_id/1204

888-NETGEAR, 24 hours a day, 7 days a week.

Good Luck


Feb 16, 2010 | PC Laptops

1 Answer

I got a new laptopwith wifi but my netgear router is not coming up with the wifi light on iv spoken to sky who havntbeen able to help sort this can you help


Hi,
Can you please explain it whether it is a Wired Router?
or if it wireless router bt the wireless light is not on.
-- if the wireless switch is not on.
-- then signin to the router page.
-- check it in wireless settings whether your wireless access point and ssid broadcast is check or not.
-- if it not then check(mark) and apply the wireless settings.
and check it whether u hv wireless light on in netgear router or not.

Regards
TecKC

Nov 09, 2009 | ASUS Eee PC 701SD

1 Answer

Disconnection problem


have you configure your netgear wg111v2

Oct 02, 2008 | PC Laptops

1 Answer

Netgear Rangemax Router not supported/can't find wireless networks after first time it logged on.


Lets do it again...

1. Check physical connections.

a. Connect the modem to the Internet port of the router. The Internet “i” LED on the front of the router should light up.
b. Connect the computer to one of the four LAN ports (i.e port 1, 2, 3 or 4) on the back of the router. The corresponding port light where you connected the computer should be lit up.

2. Access the router's web-based utility.

a. Please open any web browser like Internet Explorer or Netscape Navigator.
b. Connect to the router by typing http://routerlogin.com/basicsetting.htm or http://192.168.1.1 in the address field and click Enter or Return key.
c. A window will prompt for a user name and password. The default username is "admin" and the default password is "password".

Note: If you were unable to access the router's web-based utility, you may reset the router to restore the settings to factory default.

To reset the router:

a. Please push the reset button at the back of the router and release after 30 seconds.
b. Unplug the power adapter for 10 seconds and then plug it back in.

3. Configure the router.

If your Internet Service Provider is using a cable connection, please follow the steps below:

a. Click on Basic Settings under Setup tab.
b. Select No for Does Your Internet Connection Require A Login?.
c. Scroll down on the center page and look for the Router MAC Address section. Set it to Use computer MAC address and click on the Apply button.

If your Internet Service Provider is using a DSL connection, please follow the steps below:

a. Click on Basic Settings.
b. Select Yes for Does Your Internet Connection Require A Login?.
c. Select Other on the Internet Service Provider drop down box.
d. Enter your ISP's username (username@ISPdomain) and password. Then, click on Apply.

4. Configure the wireless settings.

a. Click on the Wireless Settings under Setup.
b. Change the SSID to any unique name.

Note: Name (11N SSID) is for wireless N computers running at 5GHz and the Name (11G SSID) is for wireless G computers running 2.4GHz. Kindly make sure that (11N SSID) and (11G SSID) names are different.

c. Set the mode to Up to 270Mbps at 5GHz & 54Mbps at 2.4GHz.
d. Set the 11N Channel to 48 / 5.240GHz and 11G channel to 1 / 2.412GHz.
e. Scroll down, look for the Security Options settings and select WEP (Wired Equivalent Privacy).
d. Set the Authentication type to "Automatic" and the Encryption Strength to "64bit".
e. Leave the Passphrase field blank, select Key 1 and enter a 10-digit number.

Note: The 10-digit number you typed in the key 1 will be the password or network key for the wireless connection.

f. Click Apply button to save the changes.
g. Go to Router Status under Maintenance tab and check if there is an IP address under Internet port. If it's 0.0.0.0, do a power cycle.

5. Power cycle.

a. Power off the modem, router and computers.
b. Turn on the power of the modem first and wait for it to initialize, the lights to stop blinking.
c. Power back the router and the computers. Check if it will be able to get online.

6. Connect wireless computer to the router.

Note: If your wireless computer supports 5GHz and 2.4GHz frequency you will see two wireless networks which are 11N and 11G SSID. However, if your wireless computer only support 2.4GHz frequency you will only see one wireless network which is 11G SSID.

If you are using Windows XP with Service Pack 1, please follow the steps below:

a. Please right click on the Wireless icon on the right lower end portion of your computer.
b. Then click on View Available Wireless Networks.
c. Click on the Advanced tab.
d. Please delete all the preferred networks then click on OK.
e. Right click on the Wireless icon again and click on View Available Wireless Network. Please select your network and click on Connect. It will ask you for the network key.
f. Please type in the network key and then confirm it. Network key is the password you type on the key 1 of the wireless settings of the router.
g. Make sure not to enable IEEE and then click on Connect.

If you are using Windows XP with Service Pack 2, please follow the steps below:

a. Please right click on the Wireless icon on the right lower end portion of your computer.
b. Then click on View Available Wireless Networks.
c. Click on the Change Advanced Settings.
d. Click on the Wireless Networks tab remove all the preferred networks then click on OK.
e. Right click on the Wireless icon then click on View Available Wireless Networks.
f. Select your network and click on Connect.
g. It will ask you for the network key. Type in the network key and confirm it. Then click on Connect. Network key is the password you type on the key 1 of the wireless settings of the router.

If you are using Windows Vista, please follow the steps below:

a. Click Start then select Connect To.
b. Connect to a network window will show up.
c. Select your wireless network and click Connect.
d. It will ask you for a network key. Type in the network key and confirm it. Then click on Connect.

From the above configuration, please check if you can now access the Internet with the ideal speed you have from your ISP.

However, if this does not resolve the issue we will need to get some additional details from you to be able to assist you further. I have summarized my questions below:

1. Who is your internet service provider? Is it Cable or DSL connection?
2. How many wired and wireless computers are connected to the router?

Aug 24, 2008 | HP Pavilion dv8000t Notebook

1 Answer

Wireless network


WHATS THE MODEL OF THE NETGEAR ROUTER? you have to have the router address and access the router through internet explorer or firefox. once logged into the router page online then you can change or access the security tab copy or remove the WEP KEY THEN TRY TO ACCESS THE INTERNET WITH THE KEY OR WITHOUT THE KEY YOU DECIDE WHICH WAY TO GO

May 20, 2008 | Acer Aspire 5100 Notebook

Not finding what you are looking for?
PC Laptops Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Laptops Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a PC Laptop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...