Question about Gigabyte Motherboards
If you have two sticks of ram .... 256 each one is not working... take them out and reseat them. if that doesn't work swap slots.... you are likely using about 8mb for system video or perhaps more so you are not likely to show a full 512 mb.
Posted on Sep 15, 2008
Tips for a great answer:
Jul 31, 2012 | Intel Gigabyte GA-8S661FXM-775 SiS 661FX...
Jul 09, 2011 | Intel Motherboard
Jun 20, 2011 | Gigabyte GA-8S661FXM-775 (4719331838096)...
This mainboard uses DDR400 memory
A High Density module is by far much slower than Low Density module at the same speed rating say PC3200/DDR400. High density modules are FAR CHEAPER, less than half the price when compare with low density modules and hence high density modules will NOT work on 90% of today's PC chipsets. LOW DENSITY modules have 100% compatibility with ALL systems and ALL chipsets. HIGH DENSITY modules only have 10% compatibility and are VERY SLOW.
So AVOID those 'High-Density - 128Mx4 config 1GB modules which is usually UNBRANDED and is NO NAME!
With this in mind it is far better to use low density Ram. Most RAM cards today are double sided, it all depends on the capacity of the RAM card.
Please rate this solloution as it it much appreciated.
Oct 31, 2010 | Gigabyte GA-8S661FXM-775 MATX MBD SIS661FX...
Aug 06, 2010 | Intel D101GGC Motherboard
Jan 19, 2010 | Motherboards
Apr 23, 2009 | 3Com Motherboards
148 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: