Question about JVC XV-N50 DVD Player

Open Question

Connecting dvd player to cable dvr box

Jvc xv-N50 dvd player
motorola dch4316 dvr cable box
old non hd tv
how do i hook them up?

Posted by on

3 Suggested Answers

  • 6 Answers

SOURCE: recording with comcast hd box and toshiba VCR/DVD

1st, see if you can get another cable box that offers component as well as RCA outputs on the back. Does your cable box have S Video out and does your toshiba have S Video in? If so, hook up the S Video from cable box to Toshiba. Then hook up R&W audio from Cable Box out to Toshiba In. Set the channel on the cable box to what you want to record. Set Toshiba to record channel 3 or 4, whichever your Toshiba is set on. The cable box controls the channel you are recording. You cannot set the recorder to the channel you want to record. It must be either 3 or 4. Try it. If everything else fails, you have to go cable from wall to cable in on cable box, cable out on cable box to cable in on Toshiba then either cable or RCA out on Toshiba to TV.

Posted on Jan 27, 2009

SOURCE: Unlock code for jvc XV-N652

Below is the only known process to unlock that model of DVD player. Does not work on 100% of dvd players.

1. Turn on dvd player
2. Open the tray
3. Press 0000 in the Remote Controller
4. Change to any region you want (0 for region free)
5. Press Pause to confirm your change
6. Turn off
7. Turn on again and enjoy

Hope this works for yours, please post back if it does. Thank you for trying Fixya!

Posted on Mar 24, 2009

  • 1 Answer

SOURCE: JVC dvd player model XV-N650 unlocking codes

From another site...

Region code hack posted by mairel, December 18 2007:

A greeting to all, good after point to look for and to break the head, I could convert to multizona my DVD, I count them that I stay fillet. here they go them the procedures, I hope it serves them. 100% guaranteed.

1. Turn on
2. Open the tray
3. Press 0000 in RC
4. Change to any region you want 0 for region free
5. Press Pause
6. Turn off
7. Turn on again and enjoy

Posted on May 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

#dhb300b DVD player plays only black and white my TV is a JVC HD TV with HDMI cable from driver TV box hook up DVD to TV audivo to audivo video to video set TV to component program DVD to TV but plats


The yellow/red/white cables are COMPOSITE cables. COMPONENT cables are RED/BLUE/GREEN. You can buy those at any electronics store. Your best bet, though, is to stick with HDMI if you can.

Jan 21, 2015 | JVC Televison & Video

1 Answer

I have surroundsound. I have dish network with hd dvr. I have a sony bravia hd tv. I have a dvd player, and cd player. I have a magnavox dvd recorder. I want to record from my dvr to my dvd recorder. ...


To get the functionality you're looking for you'll need to to take the cable running from your DVR output and connect it to the input on your DVD recorder. Next you want to connect a cable from your DVD recorder output and connect it to your TV. If this is an HD set up you want to use HD Cables for all of the connections.

Daniel Busa
DISH Network Customer Service

Jan 03, 2011 | Philips Magnavox MWR20V6 DVD Recorder/VCR

1 Answer

JVC XV-SA602 player - I just get red and blue wavy lines on my TV, but can get audio. I've checked my component video connections and they seem fine, but cannot get video or even the menu to come up on TV....


I found the problem, or at least the solution. I set the switch on the back of the DVD to "remote" and reset the TV settings on the remote (although they had not changed and were still OK). With the TV/Video switch set to "colorstream", I finally got the video from the DVD. This was odd, because my TV says it does not accept progressive scan and my settings have always been with the switch on 480i on the DVD. The only change has been a added cable TV DVR box capable of HD (although TV is not HD). Does not seem like that should affect things since the cable box just outputs to the TV. But, at any rate, this regained our picture.

Nov 23, 2009 | JVC XV-SA602SL DVD Player

1 Answer

Split screen


First step is to read your manual,it will tell you what to do

May 06, 2009 | JVC XV-N50 DVD Player

1 Answer

DVD is hook up and no picture on the TV.


You have to make sure that the RCA cables are properly connected to the TV. Check the TV/Mode if it's set to AV1 (Audio/Video1) or AV2. You may check the TV remote to set it to AV1 or AV2.

From the DVD, the cable should be connected to OUT. And on the TV...video and audio should be connected to IN.

Apr 05, 2009 | JVC XV-S300 DVD Player

1 Answer

Recording with comcast hd box and toshiba VCR/DVD


1st, see if you can get another cable box that offers component as well as RCA outputs on the back. Does your cable box have S Video out and does your toshiba have S Video in? If so, hook up the S Video from cable box to Toshiba. Then hook up R&W audio from Cable Box out to Toshiba In. Set the channel on the cable box to what you want to record. Set Toshiba to record channel 3 or 4, whichever your Toshiba is set on. The cable box controls the channel you are recording. You cannot set the recorder to the channel you want to record. It must be either 3 or 4. Try it. If everything else fails, you have to go cable from wall to cable in on cable box, cable out on cable box to cable in on Toshiba then either cable or RCA out on Toshiba to TV.

Jan 17, 2009 | Toshiba DVR610 DVD Recorder/VCR

2 Answers

JVC DVD player problem


You have set the DVD to progressive output for your big tv. The little one will not accept this. Your manual will tell you how to reset it. The remote may be needed. Reconnect it to the big tv and check the menus.

Sep 01, 2007 | JVC XV-N422S DVD Player

1 Answer

Hooking up DVD player to HD wires.


Have you tried to go to a different channel?

Apr 16, 2007 | JVC XV-LTR1 DVD Player

2 Answers

No Colour


what is a jvc xv player? how about if u connect ur tv to a cable program, does it give u the same problem? if not, ur xv player is not compatible with ur tv or tv needs to configure setting and also that means ur tv is ok. if yes, there is a problem in the color circuit of ur tv. have it check by a serviceman. but if its not economical to do it, just buy a new one.

Jan 15, 2007 | JVC XV-N312

Not finding what you are looking for?
JVC XV-N50 DVD Player Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69808 Answers

easy alberta
easy alberta

Level 2 Expert

132 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a JVC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...