Question about Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore mod #110. 26962500

There is a leak underneath i do not know where is coming from.
I try to look at some pictures but the model number did not come up
what shoud i be looking for to determine what the probem is.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert who has answered 200 questions.

  • Expert
  • 261 Answers

Hopefully it is a top load machine and that the liquid is water leaking from under the washer. If you have room you can pull the machine out two feet and tilt it back and look with a flashlight at the pump. Front middle with two hoses attached is your pump, water will leak in two areas. In front center of the pump friction will darken the pump in a thin dark circular line around the raised center area and burn a hole through like a cookie cutter.The second is on the back where the motor spindle engages the pump. You will see a line of water there also. A simple feel test and looking for wet fingers will do it. Use part 3363394 from a parts house. You will see two clips one top and one bottom that pop off with a screw driver and pliers to slide the clamps back on the hoses, then a little wet, align the spindle with the pump recess attach the clamps and clips. Set the machine down and do this for me, rock the machine forward on its front two feet until you hear a rachet sound, the back feet have dropped and when you set it down the level will adjust.

Posted on Sep 15, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Replace mixing valve

If this is a Kenmore top loader such as the one pictured, you need to remove the exterior washer case in order to access the mixing valve. DO NOT attempt to remove the back pnel as these washers are not designed to have the back panel removed. The following link explains step-by-step how to access and replace the valve:

I could not find an exact match for the model number you provided, but most Kenmore top loaders are configured the same regardless of features.

If you have any questions about this repair, or if your washer configuration is different from what I have described (i.e., if this is a Calypso, Cabrio or Oasis), please post back and let me know. I hope this helps you.

NOTE: Kenmore is manufactured by Whirlpool, so these instructions do apply.

Apr 02, 2010 | Kenmore 23822 Top Load Washer

1 Answer

My Kenmore (Mod # 665.17842400) dishwasher stopped towards the end of a rinse cycle (dishes were almost clean). A pool of water is in the bottom now and the controls don't come on anymore. I just...

You may have a small leak in drain hose. check the hose when the unit is draining, you may see the leak.
Let us know if you need further clarification.
Thanks for contacting

Dec 03, 2009 | Kenmore Elite 45986 Front Load Washer

1 Answer

How to take off the agitator on my kenmore washer mod 11094572200

if its a older model remove cap on the vary top on the agitator it is a screw under there

Sep 28, 2009 | Kenmore 22422 Top Load Washer

1 Answer

It's an Elite not sure the model number but I have a leak from underneath after the clothes are washed and when the water is discharged before the spin cycle.

this could be a broken hose or a leak from the water pump , if you have an access panel in the back u can check this , or access from underneath

Sep 26, 2009 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

Kenmore Series 80 Washer leaking oil underneath


Aug 21, 2009 | Kenmore 22642 Top Load Washer

1 Answer

Kenmore Model 110 top loading washer

May be the water pump! Give the model number in full.

Jun 09, 2009 | Kenmore 24032\24036 Top Load Washer

2 Answers

Kenmore 80 series leaking

the pump is most likely the cause if you have mach skills i can walk you thru it on how to open the unit and check it let me know

Jan 24, 2008 | Kenmore 24032\24036 Top Load Washer

Not finding what you are looking for?
Kenmore 24032\24036 Top Load Washer Logo

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts


Level 3 Expert

5363 Answers


Level 3 Expert

662 Answers


Level 2 Expert

65 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides