An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert whose answer got voted for 20 times.
An expert who has written 20 answers of more than 400 characters.
Re: watch dvd while driving
There is a wire that secures to the parking brake of your car, and this is the safety feature that will turn of the screen once your car is in drive. Simply change this wire over to the Accessory wire and you will be able to play DVDs while driving. If the radio has some sort of G Analyzer, I am not sure.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
you have to bypass the parking brake safety switch. Basically, right now it is wired to the ground on your parking brake. Figure out where it is by following the wire from the head unit. Disconnect it, and connect the parking brake wire to the ground for the radio itself.
very easy fix. you can pay thirty bucks on ebay and buy the bypass kit or make it yourself. but the light green wire on the harness has to be hooked up to ground. just hook the light green wire to the chassie of the car and you will be able to see dvds all the time. If you want to buy the kit its not really needed I have a toggle switch on mine just for turning it on and off when I am driving. simple as putting a wire from your chassie of the car(Ground) and then the other from the unit(light green wire) to a switch. hooking it up from Supply to Acc on the switch.
No ....go to a hardware store buy a toggle switch than get a single speaker wire (small wire) attach it to the red wire on the back of your pioneer deck (make sure to leave the red wire in back of deck as well) and attach it to the power on the toggle switch do the same with the black wire (ground wire) the black wire will go into the toggle switch under the power wire. finally install the parking break wire from the pioneer unit to the last slot on toggle switch and this should do the trick if not swap the ground spot for the brake spot on toggle switch >>>> MAKE SURE THE TOGGEL SWITCH HAS 3 HOOK UPS to do this correctly (your system will provide sound with the toggle switch off (Blue Screen) but when toggle switch is on you get video while driving) good luck
Sorry to let you know, but the AVIC D1 does not play movie DVDs. It only has a DVD ROM drive that reads Data DVDs, in other words the navigation DVDs. You will have to add your own DVD Player or a Pioneer DVD Changer to be able to watch movies with the AVIC D1.
In order to watch the AV source in the AVIC-D2 or to have all the NAVI function while driving you must do the following: 1. Ground the original parking wire (Must Do) 2. There will be a open pin in the wiring harness under the ground wire. You must also ground this pin. I just pulled the wire out from the cellular mute pin and stuck it in the new pin and grounded it.