Question about Audio Players & Recorders

1 Answer

I have a kenwood stereo integrated amplifier KA 791 and the dual cassete KXw892, niether will come on. when plugged in the standby light only comes on. the reciever and cd player components come on fine? ps i do not have the remote

Posted by on

  • THOMAS DEVER Aug 13, 2012

    I AM 4 YEARS TOO LATE BUT I AM NOW HAVING THE SAME ISSUE INSTALLING MY BOSS'S KA996 RECEIVER AND MY UNIT WILL NOT COME OUT OF STANDBY MODE. ANY SUGGESTIONS? I HAVE PLUGGED IT INTO THE WALL ALONE AND I HAVE PLUGGED IT INTO THE TUNER AND THEN THE TUNER INTO THE WALL. STILL I HAVE NO LUCK WITH ANY POSITIVE RESULTS. ANY ADVICE IS WELCOME.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

That system came with the kt591 tunner in a bundle which consisted of what you call the Kenwood Spectrum 700 rack system, you had to plug the tuner into the wall and then plug the amp into the tunner if you didnt , when you turn the amp on you just get a relay clicking noise and nothing turned on.

Posted on Oct 30, 2008

  • carb135 Oct 30, 2008

    P.S. go on EBAY and find a kenwood tunner dirt cheep.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Universal remote codes for Kenwood Ka 87 integrated amplifier


The applicable code would be found in a compatible universal remote.

Jan 11, 2017 | Kenwood Audio Players & Recorders

1 Answer

Can't get my Kenwood VR715 receiver to go into the Select a speaker system to see if speakers are turned on. Followed manual instructions and can't get in. Any Suggestions.


Try resetting the unit by unplugging the unit from the wall, then plugging it in again WHILST holding the power on/standby button in. This should reset the system. If not:
ELECTREPAIRUSA@ELECTREPAIRUSA or you can contact us at that address as we repair/renovate all items electronic and electrical old and new.

Jan 06, 2017 | Kenwood Audio Players & Recorders

1 Answer

Kenwood VR-357 Audio Video Surround Receiver manuals


Try Googling (kenwood)(VR-357)(manual) without parens.

Jan 02, 2017 | Kenwood VR-357

1 Answer

How do I connect my technical pro dual 10 band equalizer to my professional hybrid amplifier


Use the pre in out connections or any in/out connectors that you have. Can you send a picture?
ELECTREPAIRUSA@ELECTREPAIRUSA or you can contact us at that address as we repair/renovate all items electronic and electrical old and new.

Dec 09, 2016 | Dual Audio Players & Recorders

2 Answers

Marantz how to connect 6005 amplifier to ipod


There are many solutions, I show two. The tip photo, shows a more expansive one. the lower photo the cheaper one. But both have two tulip plugs on the side for the amplifier and one 3,5 mm stereo telephone plug to the other side.
I tried both on a good stereo set, and could not hear different quality in sound. My guess, the quality comping from my iPods, iPhone and iPad is not the same as from my CD player. On the CD player, a better cable proved to give a better sound.


c25e6b72-61d1-4158-8864-9fee0335d5fc.jpg 0c90f720-e235-4415-a30c-8a9f98411676.jpg

May 26, 2014 | Audio Players & Recorders

1 Answer

It wont turn on, it shows 'push power protect' when you turn it on, or disconnect it and reconnect, i already attempted to disconnect the Sony Stereo MCH-EC909iP Mini Hi-Fi and it shows 'Push Power, P


The only thing I can think of is its goin into protection mode like an amplifier would, you maxed the volume out and it's protecting your speakers or you don't have the right voltage going to it, I can see you don't have it on a straight 120v plug and you might have the wiring wrong on the speakers to it might be too low of a ohm or too high

Nov 22, 2012 | Audio Players & Recorders

2 Answers

My s9 headphone not on of work tell me wath i do


make sure you charge the S9 using a motorola mini usb AC charger or a mini USB cord plugged into a live port.
press and hold the circle vertical bar until the light is steady blue and pair it with your bluetooth device. you only have two buttons at the rear of the device under the motorola logo.

Aug 28, 2010 | Motorola Mobility S9 Headphones

2 Answers

My headphones connect with the adapter, the blue light is on on both but nothing comes from the ipod. I have performed the factory reset but it still doesn't work. The headphones had worked fine and then...


I have same issue....just took my transmitter apart - the wires connecting the male jack to the silicon board are frayed, disconnected.....you might check that...it's only 2 small screws holding the outercase together....be careful though

Jul 07, 2009 | Logitech Bluetooth Wireless Headphones

2 Answers

Can't get my computer to discover my s9 headphones. There are no other BT devices connected. The blue light is on...


What bluetooth adapter are you using on your computer? Get the manual for the S9 from the Motorola web site: it will tell you that the blue light is related to mono voice/microphone, and flashing green is all about stereo musioc, no microphone. 
So what are you trying to do with your S9?
On your computer it can be hands-free, or a stereo headset. It has two personalities, and you should see the two modes in your bluetooth configuration screen on the PC.
From what I see in the Motorola manual, if you click the right ear button for "Play/pause" it is supposed to kick the headset into A2DP stereo playback. 

Mar 04, 2009 | Motorola Mobility S9 Headphones

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

531 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

101711 Answers

 Grubhead
Grubhead

Level 3 Expert

4767 Answers

The Knight
The Knight

Level 3 Expert

71754 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...