Question about Maytag MMV4205 Microwave Oven

1 Answer

MMV5000BDW Touch panel works intermittently

MV5000BDW Touch panel works intermittently The panel will not respond to the touch. Work around include: 1. closing the microwave door hard and trying again. 2. unplugging the microwave and trying again.
Please note sometimes it works as it is supposed to.
Please email me the solution.

Posted by on

  • 2 more comments 
  • Anonymous Oct 15, 2008

    Touch panel displays "0" and will not work. Cannot turn on light over oven or display time, etc. I would like to order a new microwave - Maytag Over the Range Microwave Model #MMV5000BDW. I am having trouble finding this model. Can you help me.

  • Anonymous Oct 26, 2008

    Problem is the touch panel ribbon cable inside oxidizes causing a bad connection. Try to find just the part that has the ribbon cable.

  • Anonymous Nov 10, 2008

    The touch panel does not repond. The clock shows the correct time and we know the unit gets power as the clock displays the proper time,

  • Anonymous Mar 15, 2014

    Sometimes the motor runs when I just close the door without hitting any buttons, but there is not heating taking place. Sometimes it starts to run if I just touch a numnber on the keypad, but do not touch start. It stops when I open the door, but then sometimes starts up again. I already had the keypad replaced when there was a recall on it.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Maytag Master
  • 8,820 Answers

You have a failing keypad.

If you (or someone you know) might want to replace it yourself, I have uploaded a handy guide with pictures showing you what's typically involved.

You can usually find helpful exploded view diagrams and order parts by entering your full model number here.

There should also be a "mini-manual" hidden inside the unit behind the control panel or hidden on the left side behind the grille, which is very helpful when troubleshooting & testing.

If you would like to have us do this for you, we do that for $39.95 plus part costs.

Please feel free to contact me directly if you need more help.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

William E. Miller, AS-EET
prototech@usa.net
http://www.microwavedisplay.com

Posted on Sep 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The touch pod on my microwavw 9je635 wont do anything when i press the boutos for timing fuction


follow this steps and fix it. God bless you

Touchpad and Control Panel


If the microwave buttons don't work the touchpad and control panel assembly are probably defective.
Touchpad


If the microwave buttons don't work the touchpad might be at fault. Generally speaking, if the dishwasher display is working and some of the buttons respond correctly but some don't, the problem is with the touchpad.
User Control and Display Board


If the microwave buttons don't work the user control and display board are most likely defective and will need to be replaced. If some of the buttons work and some don't, it is more likely a touch pad problem and the touch pad will need to be replaced.
Main Control Board


If the microwave buttons don't work the main control board is most likely defective and will need to be replaced. If some of the buttons work the touch pad is likely the problem. If none of the buttons work the problem may be in the main control board.1_24_2013_5_54_53_pm.gif1_24_2013_5_55_10_pm.jpg

Jan 24, 2013 | GE JE635 Microwave Oven

2 Answers

What's your problemPvm2070sm1ss ? touch screen control panel intermittently stops working


The touch screen has built in semiconductors that sometimes become intermittent, the only solution is to replace the touch screen.

May 17, 2012 | GE Microwave Ovens

1 Answer

Amana rfs12sw2a....1200watt The soft touch buttons don't respond except for number 6....


Sounds like a bad control board. First just check and make sure all of your connectors are in tight. Part numbers for the control board is 53001806 you could have a bad touch panel. rare and not typical but can happen part number for that is 53002019. I would probably buy both of those parts plug in the new panel into the existing control board and see of everything works. if so replace the touch panel and send the control board back. If it still does not work then swap the control board and send the touch panel back. hope that helps

Mar 19, 2011 | Amana RFS12MPS Microwave Oven

1 Answer

The touch panel pad of my microwave, model Combi, needs replacement. Pl. tell me its cost and the place nearest to Noida where i can get it. Thank you.


the cost for a new touch panel is around $80 fitted as i live in australia im not sure of the closest repairer to you but any good electronics repair shop who deal with microwaves can help you look in your local phone directory

p.s the only time we replace touch panels are when they are worn out if the buttons are not responding then the problem is not the touch pad this is a repaly problem but is cheaper to repair have them check as to the correct fault before asking to have the panel replaced

best of luck to you.. please rate this repair thank you

Aug 02, 2010 | Samsung Microwave Ovens

1 Answer

Microwave Buttons Stuck


You have a bad control panel contact LG for a new panel.

Jan 24, 2010 | LG LMV1630 Convection/Microwave Oven

1 Answer

Maytag mmv5000bdw Touch panel works intermittently The panel will not respond to the touch. Work around include: 1. closing the microwave door hard and trying again. 2. unplugging the microwave and trying...


If nothing works, it sounds like you didn't get the cable inserted properly. It should fit into a connector which carries signals to the microwave's control components. These connectors usually pullup, you insert the cable, and push the connector back down.

Oct 14, 2009 | Maytag MMV5000 Microwave Oven

1 Answer

Ge microwave works intermittent, when not working display reads F-3 and key pad does not respond


This code will occur if a shorted key panel is detected continuously over 60 seconds. Replace key panel (also called touch pad).

Sep 22, 2009 | GE Spacemaker JVM1640SJ Microwave Oven

1 Answer

Whirlpool GH6177XPS3 Touch Error display


I've got the same problem and error code. Did you ever find the fix?

Jul 24, 2009 | Whirlpool GH6177XPS Microwave Oven

1 Answer

Touch pad doesn't work


ut the tech sheet did mention that intermittent F7 problems are usually caused by poor connections. So I pulled the ribbon connector off the control board and cleaned the copper connectors using a pink pencil eraser. That whupped that puppy! But then I went out on another service call, same oven, different house. The pink pencil eraser trick didn't work on this one so I had to apply some of that famous Samurai gray matter. To identify the problem on this one, I cut power to the range and disconnected the ribbon connector that connected the touch pad to the electronic range control (ERC) board. Then I re-applied power and let it sit that way for 24 hours after which the customer was instructed to call me and report on the error code status of the oven. If no error code was reported, I knew the touch pad was the problem. If, on the other hand, the F7 error code came back, then I knew the (ERC) was the culprit. In this case, the error code did not come back during the test period and, using my keen, Vulcan-like powers of deduction, concluded that the touch pad was defective. I replaced the touch pad and problem solved!

Mar 15, 2009 | GE Profile Spacemaker Over-the-Range...

1 Answer

Microwave came on by itself


Yes this is usually caused by the touch assy, but $278 !!!!! Thats kinda steep considering the panel assy is only around 30-60 bucks!!! It will need the touch assy and even possibly the control board, because sometimes the logic IC gets fried and causes "ghost issues" as well.

Sep 17, 2007 | KitchenAid KHMS155LSS 1000 Watts Microwave...

Not finding what you are looking for?
Maytag MMV4205 Microwave Oven Logo

417 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

8820 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Devabhakthuni...
Devabhakthuni...

Level 2 Expert

224 Answers

Are you a Maytag Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...