Question about Kuppersbusch Dishwashers

1 Answer

Kuppersbusch IGVS 659.2/IGV 659.2/IGVS 649.2

Hi We have one of the above models and it has been a fantastic dishwasher but now it seems not to take in water even on rinse and the timer does not decrease.
Any ideas please the model is 6 years old and if too expensive to repaire it will sadly have to go.
Thank you for your time
mike_poulton@hotmail.com

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 171 Answers

Hi mike_poulton,

I'm Harvey the master Plumber.

Your question is: You have one of the above models and it has been a fantastic dishwasher but now it seems not to take in water even on rinse and the timer does not decrease.
Any ideas please the model is 6 years old and if too expensive to repaire it will sadly have to go.

This may sound stupid but first make sure no one turned the water off to the d/w. If OK then you likely have a clogged or failed solanoid valve. The d/w must be removed for replacement. I don't recomend this for the average homeowner. You might consider utilizing our Repair Directory to find a repairman.

Feel free contact me again!
Please give me a rating here at fixya.com before you sign off
Thank you,
Harvey your Master Plumber

Posted on Sep 15, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Water not going into dishwasher


Hello & Welcome to FixYa
When the water comes however, won't go inside the unit then it indicates that the problem is either with a clogged/blocked inlet valve or the water inlet valve itself has gone bad and needs replacement. You can also test two terminals of the water inlet valve before replacing it. Please get back to me if you have any other questions.

Kevin

Dec 14, 2010 | Kuppersbusch 23 in. IGV6435 Built-In...

1 Answer

Where do I find the model number on a kuppersbusch dish washer?


try inside the door on frame if not there try looking on the back of machine or on lower door panel if machine has one

Dec 25, 2009 | Dishwashers

1 Answer

The bottom stays full of water how do resolve this ? thanks


Take the middle filter out look into the bottom of the washer and check the impeller on the pump is free IE could be something like a rubber band fouling it.

Nov 12, 2009 | Kuppersbusch K 24 in. IGVS 669.1 Built-in...

1 Answer

Dishwasher is leaking during programme


Hi,
Here is a tip that I wrote about dishwashers and them leaking.

Leaking Dishwasher

heatman101
asgfd

Oct 19, 2009 | Kuppersbusch 23 in. IGV6435 Built-In...

1 Answer

Kuppersbusch dishwasher not working


white star kitchen appliance ask for martin white

Apr 01, 2009 | Kuppersbusch K 24 in. IGVS 669.1 Built-in...

1 Answer

Won't drain after wash cycle


sounds like you need a new drain pump, call currys partmaster quoting your model number and ask them for a quote on a new drain pump they are really easy to fit, or a local engineer in your area ll fit it for around £35

Mar 05, 2009 | Kuppersbusch 23 in. IGV6435 Built-In...

1 Answer

The digital display is showing S2


try switching off the power for a short time it might reset itself

Jan 01, 2009 | Kuppersbusch K 24 in. IGVS 669.1 Built-in...

1 Answer

Top Drawer light is out-display eratic powers on and off at will.


Hi,
Below is the service manual link and a web site that I found. refer to the lower section where a person writes in that the fixed the flooding with a hairdryer. I hope this helps, they seem like fantastic dishwashers.

http://www.scribd.com/doc/6462163/DD601V2-Manual

http://fixitnow.com/wp/2004/10/25/appliance-repair-revelation-fisher-paykel-dd602-dishdrawer-f1-code/

Mat
Please rate me

Nov 30, 2008 | Fisher and Paykel 23 in. DD-603SS Built-in...

2 Answers

Celsius deshwasher CDW12. Dial gets jammed on water inlet settings?


The Celcius dishwasher is owned by GAF. Their phone number in Australia is 1300 659 489. You could try them. Hope it works.

Mar 16, 2008 | Dishwashers

1 Answer

Component failure


Put a bead of silicone on the tube connection and let it set up good before running. If the tube is in good shape and only comes loose this should be an easy fix.

Jan 18, 2008 | Whirlpool GU2400XTP Built-in Dishwasher

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

598 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kuppersbusch Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Brad Brown

Level 3 Expert

13809 Answers

Are you a Kuppersbusch Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...