Question about LG WM1815CS Front Load Washer

2 Answers

Error code LE on LG Wm1815cs

I get an inital start with the washer, then about 1 minute later the washer filled with water and then stops with an error code of LE..the motor make a low pitch noise when turning also

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Error OE appears after about 10 minutes into a cycle. "OE" in the manual says filter clogged....we have checked & cleaned all of the lines/filter. Now we hear a light humming instead and the washer isn't doing anything...

Posted on Dec 13, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 489 Answers

The motor sensor has failed and needs to be replaced.  You will need to call a qualified LG technician to repair this problem.

Posted on Sep 29, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Le error code


The error code "LE" appears after an unsuccessful attempt to fill the drum with water that results in the water level being too low to safely begin cleaning. The product manual suggests calling for service, but there are several steps you can take to try to resolve the issue at home.

Read more: http://www.ehow.com/info_8696564_maytag-washer-repair-code-le.html#ixzz2zXrmqUO5

Apr 21, 2014 | Maytag Neptune MAH5500B Front Load Washer

2 Answers

LE error code


Hope this helps.


Error Code Condition
Error Code IE Condition Inlet water supply error
Error Code UE Condition Unbalanced load
Error Code OE Condition Drain error
Error Code FE Condition Water overflow error

Dec 16, 2017 | LG WD14311RD Front Load Washer / Dryer

1 Answer

LG dishwasher model LDF6920WW 1 1/2 years old approximately. Suddenly stops a minute or so into cycle (it drains remaining water and fills with new water then get LE error). When I open the door at the...


The manufacturer has assigned this error or fault code to indicate a problem with the water circulation pump motor. Turn the appliance off for 30 minutes to allow it to cool. Then, restart the cycle. If the error code returns check the wiring to the pump motor. Also, if the wash impeller is broken this error can appear. If the impeller and wire harness check out, and the code keeps returning, you will probably need to replace the pump and motor assembly.

Aug 06, 2017 | Dishwashers

1 Answer

Lg washer wm2077cw had le error and did not work, blew in to tubing connecting tub to a sensor at top and now my reading went from 230 to 256. washer wont stop filling , leaks out front door. what is wrong...


When you blew into the tubing, you destroyed the water level sensor. You will need to change the water level sensor to stop the unit from over filling. That part number is 6601ER1006E. As for the LE error code, you one of 2 things go bad. Either the motor sensor has failed or the control board has failed. Chances are the motor sensor has failed and is the cheaper part to replace. The part number for that is 6501KW2002A
Good luck

Aug 03, 2011 | LG WM-2277HW Front Load Washer

1 Answer

I have an LG Tromm washer. I start it up it start


Hi,


LE code stands for locked motor error. When this error code appears in your front load washer it indicates a fault in the motor unit.

1 . Check the connections to the Coil/Stator at the rear of the unit possibly it should be something like a broken wire.

2 . Coil/Stator Assembly will be defective preventing the drive to operate.You should go for a replacement of that assembly.


Thank you !!

Jul 25, 2010 | LG WM0642H Front Load

1 Answer

Error code is LE. Washer fills up with water and


If water runs in when the machine is OFF but stops when the tap is turned off it means a faulty watervalve.replace water valve. Probably a double valve. Dont mix up the hoses or the wires........Nomess

Apr 18, 2010 | LG WM1812C Front Load Washer

1 Answer

LE code flashing on WM1812CW


LE code is overload on motor. This unit actually has a magneto and stator. This is what needs to be replaced. Usually find a magnet cracked.

Aug 27, 2009 | LG WM-1832C Front Load Washer

1 Answer

LE error code on LG WM0642 FL washer


LE is a locked motor error code.
It is usually associated with a loose motor connector wire or a defective Hall Sensor.

Mar 08, 2009 | LG WM-2277HW Front Load Washer

3 Answers

LE Code on control panel


Press "end of cycle". Plug off the wall. Code can be an indication of several issues. The most common cause is over-sudsing in the machine. Overloading the wash with too much laundry may also cause the LE error code. Lastly, a breakdown in the signal between the microprocessor and the motor may cause that error code. This can occur if there is a loose wire, see that all wires are tightened..........

Dec 31, 2007 | Washing Machines

Not finding what you are looking for?
LG WM1815CS Front Load Washer Logo

736 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1479 Answers

Marvin
Marvin

Level 3 Expert

84625 Answers

jimorris77

Level 3 Expert

411 Answers

Are you a LG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...