Question about NEC PX-42VP4PA 42 in. EDTV-Ready Plasma Television

Open Question

NEC MODEL PXT-42S11S.


My Nec tv has developed vertical lines, but not all the way across the screen. It still has full picture, can you help solve this problem?
susy

Posted by on

3 Suggested Answers

  • 1779 Answers

SOURCE: lines going through the nec pxt-42sv1 display

Have it service immediately. The Y main and the upper and lower Y drive boards are ready to fail big time.

Posted on Aug 25, 2009

freetek
  • 5568 Answers

SOURCE: NEC PXT-42SV1B Plasma has picture 10 seconds

Sounds like the high voltage power supply is in the process of dying. This would leave the sound unaffected. I don't know if you have a separate supply for this or if a part of the main supply. If you remove the back (after unplugging and allowing a couple of hours to pass), check inside to see if there are two boards with larger components on them. If so, look to see if one of them has more to do with the plasma display than the other; this would be the high voltage source.
This is probably repairable but you might want to check on repair vs. replacement cost before shipping it to anyone.

Posted on Dec 18, 2009

  • 901 Answers

SOURCE: how do I delete channels

Best way to delete is , select the channel you do not like. Now go to the set up menu and do manual tuning and store your preferred channel.

Posted on Aug 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a nec plasma TV model number pxt42s11s with no remote how do I turn it on


see the following web site: http://www.manualslib.com/manual/672168/Nec-Pxt-42s11s.html?page=12#manual
page 12 has a pictorial of the layout of the manual buttons & an explanation of what each does.

Apr 14, 2015 | NEC Flat Panel Televisions

1 Answer

Are there interchangable screens to put in this model cause mines broken and need another but they dont make parts anymore


you might try Pioneer parts/support

http://www.pioneerelectronics.com/PUSA/Support

you will need the part# from your panel. Pioneer makes the panels. If you do find the panel don't be surprised at the cost of it. Could very well exceed the cost of a new TV.

I recommend you shop for a new TV.

Mar 04, 2015 | NEC Flat Panel Televisions

1 Answer

NEC MODEL PXT-42S11S has no sound HELP!!!


What you describe is a symptom of power supply failure in flat panel TVs

Apr 03, 2013 | NEC PX-42VP4PA 42 in. EDTV-Ready Plasma...

1 Answer

Have NEC LCD 40 inch tv which now has no sound or picture with coloured lines down he screen, is it fixable or has screen given up??


Hi,

Uh-Oh....Vertical lines, NO PICTURE. That is NOT good.

Did your TV get hit or fall over?

The LCD panel is actually broken.

If you had a picture on it, it would still be a bad LCD panel, but when you get lines and no picture, it means the row/column bus has been severed somewhere.

The downside is the LCD panel will cost the same or more than the TV set.

I wish i could have a better solution.

Let em know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Aug 01, 2011 | NEC 40IN LCDTV 1920X1080 1000:1 40 in. LCD...

1 Answer

My NEC LCD monitor suddenly starts 'weeping' and I get vertical black and white lines from the left up to middle of the screen


Hello,

IF YOU HAVE A SOLID BLACK LINE RUNNING VERTICALLY THEN YOU HAVE A FAULTY MATRIX INVERTER. IF CENTRAL THE MAIN VERTICAL INVERTER NEEDS CHANGED. LEFT = LEFT VERTICAL INVERTER RIGHT=RIGHT.........

ANOTHER WAY TO GET THIS FAULT IS WORN OR DAMAGED RIBBON/PLASTIC GOING FROM THE SCREEN MATRIX TO THE INVERTER
I hope this will help in solving the problem....

Jun 15, 2011 | NEC 50XR5 50 in. HDTV Plasma Television

3 Answers

Hi iv got an nec 50 inch plasma tv model number pxt-50xd3 and i was told there is a power supply problem i was wondering if this is common and approximately how much will it cost me to fix?


Hi There I also have a nec 50inch plasma pxt-50xd3 its now not working. I have taking it to the repair shop who told me it was the power supply and it would cost me $550 to fix it.

Aug 30, 2010 | NEC PXT-50XD2 50 in. Plasma TV

2 Answers

NEC PXT-42SV1B Plasma has picture 10 seconds


you may check thew board here a web page where they sell boards
http://www.discount-merchant.com/

Said

Dec 18, 2009 | NEC PXT-42SX1B 42 in. Plasma TV

1 Answer

Lines going through the nec pxt-42sv1 display


Have it service immediately. The Y main and the upper and lower Y drive boards are ready to fail big time.

Aug 25, 2009 | Flat Panel Televisions

1 Answer

Do you know where I can buy a remote for an PXT-42S11S???


1 800 remotes. these guys will find a nd ship a twin copy of what you are looking for.

Feb 10, 2009 | NEC PX-42VP4PA 42 in. EDTV-Ready Plasma...

Not finding what you are looking for?
NEC PX-42VP4PA 42 in. EDTV-Ready Plasma Television Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top NEC Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

68223 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Kyle Steven OHare
Kyle Steven OHare

Level 2 Expert

111 Answers

Are you a NEC Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...