Cannon MP810 when turn on display error A600. There is also no light displaying on the printing cartridge.

Dont go to Cartridge World :(. This problem is sometimes caused when a cartridge has been re-filled and re-set too many times, The chip corrupts and causes some very weird messages. Simply try a New Set of Cartridges (Not reconditioned or Refilled). GnL Products in NSW have new compatible cartridges for about $10 each. [email protected]

Hi over heated print head error, just replace the empty ink cartridge and it will remove the error message.

ERROR CODE CANNON MP150/MP160
E2 2 No paper (ASF)
E3 3 Paper jam
E4 - No ink
E5 5 The ink cartridges are not installed or a non-supported ink cartridge is installed , or the ink cartridges are not installed properly
E8 - Waste ink absorber full, or platen waste ink absorber full «??&raquo
E9 - The connected digital camera / video camera does not support Camera Direct Printing
E14 - The Ink cartridges whose destination are wrong
E15 15 Ink cartridge is not installed
E16 - Ink remaining is unknown
E19 - Failed to scan head alignment sheet

cannon only take cannon tapes sony and cannon never shared there tape size. you can only use cannon dv disc

For the Canon Pixma MP220, I kept getting a message saying "Col Ink Vol Unknown" after refilling and replacing a cartridge. After reading some of the other responses it appears as though Canon cartridges contain internal chips that prevent you from using them after they have been refilled. However, I tried a few things and this is what worked for me.

1. Insert your refilled Canon cartridge like normal, close the lid.
2. The Error message "Col Ink Vol Unknown" should still appear.
3. Use the "Menu" button to scroll to "Maintenance" (press "Menu" 8 times to find it), then press "OK" to conduct a "Nozzle Check" and a coloured test will print out.
4. The Error message will still appear but you will be able to print using colour AND with black and white. For some silly reason the Canon Pixma MP220 won't print using black and white if there is no coloured ink...

Hope this helps!

I just replaced my MP810 printer head. Procedure: open printer - remove ink cartridges - Pick up arm located on right side of cartridge holder- remove printer head by picking up by the cartridge slots. Place new printer head in holder - replace printer cartridges - press arm down and your done....However, the error message stays on and reset procedure doesn't remove it. Canon tech support said their solution (because of distance from canon support) is to replace MP810 with comparable printer, which came to $299 with 15% discount and free shipping. My solution, I’m checking out other printers.

For any china mobile software like drivers and others, just check chinamanuals.com - ask them for an english manual for your A600 - they will find it for you.

Does anyone know how to fix error 5020 release the scanner lock switch and turn the power off & on.The Cannon MP810 Printer. Please Help!Thanks

Service Error 5100 is Displayed
Cause
Action
Movement of the FINE Cartridge Holder is blocked.
Clear the paper jam or foreign object that is preventing the FINE Cartridge Holder from moving, cancel printing from your computer, then turn OFF the machine and turn it back ON again.

The following error message appears on the color graphics display after you insert a cartridge: Remove and Check Print Cartridges . The printer will not print. The message does not specify which cartridge has caused the error. Solution This error message indicates that the printer cannot determine which cartridge is causing the error. Follow the steps below to solve the problem.

1. Remove the color cartridge from the left stall (which has a blue latch) and refasten the latch. Leave the other cartridge in place.
2. Close the printer, wait 10 to 15 seconds, then look at the LCD display.
   • If the LCD display reads Insert Color Cartridge in Left Stall , the color cartridge may be causing the problem. Follow the steps below:
     1. Clean the color cartridge contacts.
     2. Reinsert the color cartridge into the carriage and close the blue latch.
     3. Close the printer and wait 10 to 15 seconds.
     4. If the LCD display reads Remove and Check Print Cartridges , replace the color cartridge.
   OR
   
   • If the LCD display reads Remove and Check Print Cartridges , follow the steps below:
     1. Reinsert the color cartridge.
     2. Remove the black or photo cartridge, depending on which one is installed in the right stall. The right stall has the gray latch. Be sure to refasten the latch on the empty stall.
     3. Clean the black or photo cartridge contacts.
     4. Reinsert the black or photo cartridge.
     5. Close the printer and wait 10 to 15 seconds.
     6. If the LCD display reads Remove and Check Print Cartridges , replace the black or photo cartridge.

1. Remove and then reinsert the cartridge indicated in the error message.
2. If the error is still displayed, clean the contacts.

1. If the error message is Error. Remove and Check Black or Photo Cartridge , the following steps may help:

1. Remove both cartridges, lower the latches, and close the printer access door.
2. Turn off the unit by pressing the On button on the front panel. Wait for the printer to completely shut down.
3. Turn the printer back on by pressing the On button.
4. When the message display reads Insert Print Cartridges , open the access door and replace the cartridges.

1. If neither of the steps above fixed the problem, either the cartridge or the printer is faulty