Question about Tricity Bendix AW1000W Front Load Washer

Open Question

"O" Ring for filter

I have a 1994 WMN 652 Bendix Washing Machine. I require a new "O" ring for the filter
I live in Keperra,Brisbane, Qld. now of any Stockists ?

Posted by on

1 Suggested Answer

SOURCE: Tricity Bendix aw1200w washing machine does not always drain water ! What is wrong ? Thank you in anticipation .

i think something is floating around in the space between the inner and outer drums

like a sock or small plastic bag etc etc etc
so drain the machine
take the back panel off and remove the heating element and shine a torch inside
the blockage may have worked into the drain system pipes and traps
and you may need to totaly disconnect it and
lay it over on its right side {the side opposite the soap drawer}

then examine its outlet from the drum and pipes to the pump

the pump
and its housings and viens
for any wires and hair clips monopoly hotels and 2ds and 3ds platic pens
basically anything that fits into the soap drawer and fits down the intake pipes
that then lives inside the drums

so... taking the heating element out will expose the area you need to check with a torch
also if you shine a bright light thru the open lid of a washer
you can usualy see any implaled wires etc on the outer drum
most are transparrent or opaic

Posted on Dec 10, 2014

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove filter on tricity bendix 1000 washing machine?


tricity bendix aw1001w eco shower washing machine ...

? 1:11
www.youtube.com/watch?v=lJZrGLfYdtQ
Aug 19, 2009 - Uploaded by whichwasher2007
my aunt's old tricity bendix. it says aw1000w on the front, but check ... How do you clean out mold in the ...

Sep 29, 2015 | Tricity Bendix AW1000W Front Load Washer

1 Answer

Leaking at front door steel ring snapped where do u get parts from


The new part is simple to fit below is a link to a local retailer who will be able to supply the part.

Link:

Mar 11, 2012 | LG Washing Machines

1 Answer

I have mislaid my manual. i am trying to clean the filter of my tricity bendix 1000rmp washing machine. I opened the small door at the bottom right of the machine and unscrewed the cap inside . now the...


Make sure the filter and the housing are clean and that there is no grit or similar on the seal, if it still leaks, then you may have to fit a new filter and or seal.

Nov 05, 2010 | Tricity Bendix AW1000W Front Load Washer

1 Answer

Diamond ring went through wash cycle


If there is no filter to be seen at the fron t of washer, then remove the rear cover, locate the large blkck hose fastened to bottom of drum, remove and check inside the hose, there is a good chance the ring could be trapped in the hose.
Good luck.

Feb 11, 2010 | Washing Machines

1 Answer

I have cleaned the fliter on my washing whirlpool washing machine and now it leaks from it can you help


Possibly a small particle of rubbish under the rubber sealing ring or damaged ring. Replace if necessary and check that the filter is not over tightened

Aug 25, 2009 | Whirlpool WFW9200S Front Load Washer

1 Answer

I am having problem putting anew door seal on a


hello it a tricky job ,take the top off the washer look down you should see a metal ring with a screw on it . unscrew the the ring it should come apart . then you be able to pull the seal off . the on the front of the washer around opening of the door is a clip with 2 screws unscrew this there should be a metal wire take this off and pull the seal off and the whole seal should come off when you put the new 1 on put the seal on the drum first and don't forget to put the metal ring back on all the best

shaun

Aug 07, 2009 | Washing Machines

1 Answer

I've washed some jewellery in washing machine!!


You might be able to pop the very top off the agitater,unscrew the nut and pull it up,your jewels will be under it.
Hope this helped.Let me know by rating me or
for more help go to live chat.Thanks
Len West

Nov 11, 2008 | Indesit WA 125 Front Load Washer

1 Answer

Washing machine


The ring is called a snubber. Its not very easy to replace either. I recommend new springs too.

Dec 01, 2007 | Washing Machines

1 Answer

Whirlpool Washing Machine Balance Ring


this is now 2009 the machine you speak of is a piece of junk so by now its probably trashed you don't need my help

Nov 07, 2007 | Washing Machines

3 Answers

Washing machine nec nw-652


i am having the almost the same problem with what i have, if it is turn, the water will just keeping on pouring in non stop, it does matter wether it is wash, rinse, dry or spin the water will just keep on pouring in at all time, it is not a good machine at all.

Sep 09, 2007 | Washing Machines

Not finding what you are looking for?
Tricity Bendix AW1000W Front Load Washer Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tricity Bendix Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Chris Hall
Chris Hall

Level 3 Expert

842 Answers

Are you a Tricity Bendix Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...