Question about Mitsubishi WD-62525 62" Rear Projection HDTV

3 Answers

Mitsubishi tv i have a 62 inch mitsubishi dlp model#wd-62525 serial#125902 , tv will not power up it has a flashing green lite below the timer button that flashes,i have try the reset button but it just starts blinking green again.can you help me with this problem.

Posted by on

  • iguana523_19 Sep 25, 2008

    I have exactly the same problem with mine. It comes on and turns off after a few seconds. The lamp light is lit a constant red.

  • Anonymous Dec 01, 2008

    Same problem timer LED flashes Green, TV Won't Power on.

    I have tried to power cycle, Rest button nothing works.

    WD65733



×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 505 Answers

This is likely capacitors failing in your DM or FMT module. This model is know for the 1000uf caps going bad after 4 years or so. There are 4 on each board, plus 4 on the power supply that may go bad. You can tell by the bulging tops that are not flat. Two 3300uf caps go bad in the power supply regularly as well (this gives a lamp error). I recommend getting a service center to send the whole signal block or chassis into Mitsubishi for rebuild to get it all taken care of. The dissassembly is very difficult and frustrating. If you have tons of time and determination you could repair yourself.

Posted on Dec 07, 2008

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

I have a 62 inch mitsubishi dlp model#wd-62525 , tv will not power up it has a flashing green lite below the timer button that flashes,i have try the reset button but it just starts blinking green again.can you help me with this problem.

Posted on Sep 26, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Ok.
#1. replaced capacitors on power board. DM board FMT board .
# 2 on power board you need to chek caps. 3300mf x 35 v.QTY 2.
# 3 12 capacitor 1000mf x 16 v.
If caps 1000mf x 16 v . looked good. replaced anyway......

Posted on Sep 17, 2008

1 Suggested Answer

Slinteriors
  • 8617 Answers

SOURCE: i have a 62 inch mitsubishi dlp model#wd-62525 serial#125902 , tv will not power up it has a flashing green lite below the timer button that flashes,i have try the reset button but it just starts blin

if the light just constantly blicks green and doesnt stop. You will need the" V26 DM repair kit " which will usually repair that issue. You can get the repair kit at the following link which includes the replacement capacitor and instructions
http://servicemanuals.vstore.ca/

Posted on Sep 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Green blinking timer light, TV won't turn on


Common to mitsubishi dlp tv's,you have a bad signal ***'y (power supply,formater board) lots of bad electrolytic capacitors,

Mar 22, 2010 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

Timer light blinking fast and is green, Tv will not turn on even after a reset, bulb is good


First mistake was buying Mitsubishi Model WD-62525
The DM capacitors need replacement contact a local Mitsubishi Model WD-62525repair center.

Jan 23, 2010 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

Mitsubishi WD-62627 62" DLP TV


Try this:
1) turn on the TV
2) from the remote control press MENU 2,4,7,0 then ENTER
3) tv will state on screen that it is INITIALIZING
4) when done press the front reset button.
5) should be good to go!

Oct 26, 2009 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

TV will not turn on now after flashing green light at power button


Hi,For lcd,dlp or plasma each code is different,please list tv model.

Oct 06, 2009 | Mitsubishi WD-62525 62" Rear Projection...

2 Answers

Timer light did not stop flash


Lamp is not the issue. It most likely is a your DM card. You most likely have some capacitors that need to be replaced. This is a terrible issue with this unit. Do a google search for "DM" and the model number and you should see hundreds of posts.

Jul 02, 2009 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

Flashing Green "Timer" light on my Mitsubishi WD-62525


My Sony had the same problem. Unplug from the wall for 36 hours and it should solve the problem

Mar 22, 2009 | Mitsubishi WD-62525 62" Rear Projection...

2 Answers

I have a 62 inch mitsubishi dlp model#wd-62525 serial#125902 , tv will not power up it has a flashing green lite below the timer button that flashes,i have try the reset button but it just starts blinking...


if the light just constantly blicks green and doesnt stop. You will need the" V26 DM repair kit " which will usually repair that issue. You can get the repair kit at the following link which includes the replacement capacitor and instructions
http://servicemanuals.vstore.ca/

Sep 26, 2008 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

Mitsubishi 62" dlp wd-62525


The lamp is either defective, not connected properly to the wiring or plugs (careful alignment required on the two connections), wrong type bulb, or the front panel is not replaced properly to trigger the panel sense switch (lower right side of panel)

Sep 02, 2008 | Mitsubishi WD-62525 62" Rear Projection...

Not finding what you are looking for?
Mitsubishi WD-62525 62" Rear Projection HDTV Logo

691 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1191 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68157 Answers

Are you a Mitsubishi Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...