Question about Sony CLIE PEG-NX70V Handheld

1 Answer

Stopped working Hi there, I've had this palm for over 2 years. Always worked fine. Then one day after it was being charged it never woke up.. I've changed the battery and it still didn't work. I've noted that the unit does not power on at all. It appears to be charging when attached to its base but it did does not power on. what do you think the problem may be due to? a short somewhere or a broken screen? Any help would be appreciated. thanks in advance..

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 2 Answers
Re: Stopped working

I do not have a solution for you but if you cannot get it working I can use the case to repair my NX60, I think. I hope that you can get your unit fixed but if you cannot please let me know if you want to get rid of it. See my posting: Sony CLIE PEG-NX60 Handheld Sony PDA repair NX60/U I have a Sony PEG NX60.....

Posted on Apr 27, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Power button unresponsive, always charging

Normal 0 Hi,
The best thing to do is to go to the free palm chat service they offer. I have used this and it worked good for me. Here is a link to the free chat service. Scroll to the bottom of the page and you will see a Palm Chat. From there click on the link that says Chat Now and follow the online prompts. Best wishes...I hope this will help you.

Normal 0

Nov 26, 2009 | Palm Tungsten T5 - Multilingual Handheld

1 Answer

I stopped using my m505 for several months. How long until it will be charged enough to turn on? Its been charging now for at least 2 hours and nothing.

I would charge it over night. If the batteries went completely dead sometimes it takes an extended period of time to charge them. If that doesn't work try using the free palm chat. I have enclosed that link. Scroll to the bottom of the page and you will see Palm chat. From there click on the link that says chat now.
Best wishes.

Nov 18, 2009 | Palm m505 Handheld

2 Answers

My Palm TX Handheld will not turn on, I have

It sounds like the battery might be dead. If I were you I would take advantage of the free chat that palm provides to their customers. I have used it in the past always with good results. I am including a link to that page. Best wishes.

Scroll down until you see this.....
Other support options from Palm Palm Forums - free, always available - go there now
Learn from fellow Palm customers, or answer others' questions
Palm Chat - free, quick and simple - chat now
Communicate easily, securely, and instantly with a Palm agent.
Repair Services Open Check your warranty and learn about your repair options.
--> --> Warranty This product is covered under a limited warranty for 1 year. Eligible in-warranty repairs are offered at no charge for one year from the date of original purchase. You may be responsible for shipping charges. The warranty does not cover damage resulting from certain events or conditions. Please review your warranty for more information.
--> 2. Troubleshoot Review our solutions to determine if you can fix your issue on your own.
Try Troubleshooter --> Repair --> In warranty repair: --> To arrange for in-warranty service on your device, please contact Palm:
--> --> Out of warranty repair: -->
If the damage to your device falls outside warranty coverage, or if your device is no longer covered under the limited warranty period, you can arrange for an out-of-warranty repair from Palm. --> Cost: $199 US ($249 CAN)
--> --> Check repair status: If you have already started a repair with Palm, use our online repair status check:

Oct 27, 2009 | Palm TX Handheld

2 Answers

The touch screen stopped responding. Worked well all day yesterday but this morning quit working.

Perform hard reset. Turn unit off. Press soft reset and turn unit on at same time

Jul 31, 2009 | Palm Z22 Handheld

3 Answers

Tungsten E

Amazingly prone to static electricity. Because Tungsten was smart enough to make the battery a solder in (yeah right), service on them is so bad, even Tungsten won't fool with it. Can you say paperweight?

Oct 26, 2008 | Palm Tungsten E Handheld

1 Answer

Palm TX not turn on

It may be a faulty charger. You may have checked this already, but here is the link to the palm website
I have a palm TX as well I just hope its a bad charger and not the TX. Sometimes I my TX dosnt charge from the usb sync cable.

Mar 27, 2008 | Palm TX Handheld

4 Answers

Palm Z22 will not turn on

I had this problem in the very beginning and a few times after. What worked is the following.
Put it to charge for at least half an hour. You won't see it is charging or anything.
Then, while connected to the charger, press the reset button.
Have you guys tried it like this already?

Feb 02, 2008 | Palm Z22 Handheld

1 Answer

Battery not holding a charge, maybe...

The only thing close that I can recommend is doing an in cradle reset. Palms site says it only works on certain models, but hey it's worth a shot.,/?St=97,E=0000000000825271086,K=7324,Sxi=2,Case=Obj(26419)

Nov 26, 2007 | Palm LifeDrive Handheld

1 Answer

No power

If you got it a few years ago, or leave it on charge for several days, you might need a new battery. If thats not the case, if you droped it the battery jumper may have come loose, to open the device just take a small hex key (you can buy a set at buck or two that is fine) and take out the screws. the jumper is holding the back plate on the device. Just press down on the conecter and see if it will turn on (the buttons/frame may pop out when you open it. The charger is the last possible thing to test if all else fails, get a multi meter and test the charger for something under 9 volts. If this doesnt work then just buy a new palm because palm is really hard to deal with.

Jul 09, 2007 | Palm Tungsten E Handheld

4 Answers

My hot sync was working fine and now it will not communicate... I have tried everything listed on your website but nothing seems to work please help

My Palm stopped syncing on both my work and home computer at the same time. I have been syncing fine with XP and USB. I found a thread where someone mentioned getting Palm to send you a Palm Reset Card. I called Palm and they didn't offer this solution, but I asked for the Palm Reset Card and it worked beautifully! They took my call and sent the Reset Card no charge. Unfortunately, nobody at Palm seems to know about this solution.

Sep 11, 2005 | Palm Vx Handheld

Not finding what you are looking for?
Sony CLIE PEG-NX70V Handheld Logo

Related Topics:

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony PDAs Experts


Level 3 Expert

56797 Answers

Lawrence Oravetz

Level 3 Expert

7053 Answers


Level 3 Expert

93802 Answers

Are you a Sony PDA Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides