Question about SVA-USA HD4208TIII-PDP 42 in. EDTV-Ready Plasma Television

6 Answers

Can't turn on TV

Every time I turn on the tv it automatially clicks, but does not turn on. Every once in a while (and currently I can't do it), after manually switching the power on and off, I can get the screen to turn on. Then we just don't turn the TV off, instead letting it fall into "sleep" mode. However it recently shut off and we can't get it back on. Is it a remote control problem (as this is the only way to turn on the TV)?

Posted by on

  • 8 more comments 
  • Anonymous Nov 08, 2007

    Mine does the same thing. Someone recomended to change the transistor 224Y on the power bord. Which one is it?

    Thanks

    Steve

  • Robotics man Nov 17, 2007

    Turned it off and on and I cannot get it to turn on!!

  • Bob Rost Nov 26, 2007

    same problem, can anybdy tell me that the transistor model/part number is for 224Y?

  • Anonymous Dec 19, 2007

    I have the same problem with my 3 year old tv. Solution?

  • kaysha Jan 15, 2008

    I have the same problem with my televison going into standby mode and then immediately clicking off. Adding to my frustration I am unable to locate anyone that works on this product.

  • dmenkhau Apr 08, 2008

    Same here...I can replace a transistor..which one? any one locate a service manual for this TV? Would love to be able to fix it! please Help! hate to spend $150-$350 for a $2.99 radio shack part! Help!

  • IMJR Jun 23, 2008

    I have the same problem, I used a temporary repair, the trick of hair dryer, blowing hot air area of the two relays RL8001 RL8802 by 5 minutes after connecting and disconnecting the power cord to reset, worked the first time. do not shut it down, keep it on, it will be in sleep mode when cable or satellite box is off, it worked for 3 months until there was a blackout,I tried again, this time did not worked, so I unplug all cables from the power supply except the power plug and the "con8011", I removed the screws of the power supply and I aisled the ground, then I connected the power cord and the power supply worked, I assembled without shutting down all over again and I got it working so far, I do not want to spend nearly $ 500 in a new power supply.

  • jkuehn9091 Jul 02, 2008

    I am having the same problem, I replaced the two relays but still get the same results

  • Anonymous Mar 14, 2014

    I never synced my tv to my cable remote and always left tv on. THis time I shut off cable and then turned off tv manually and now it wont turn back on

  • Anonymous Mar 25, 2014

    sometimes picture will come on and when turn off picture will not come back on when tv is turned off. tv is getting current

×

Ad

6 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I have the same problem. Guess I'll have to buy a new one ( NOT SVA)!!!!.

Posted on Sep 25, 2008

Ad

SVA (Group) USA, Inc.
North American Sales Operation
6000 Rickenbacker Road
Commerce, CA, 90040
United States
888-8-ASK-SVA
323-346-0888
Fax: 323-346-0619

Customer Service:
888-8-ASK-SVA


I have same problem stuck on standby mode This tv is junk How much did everyone pay for this tv new it should be a class action law suit for this manufacture defect on our tvs we should get our money back or the thing fixed for free Everyone call I called them and they are having a tech call me back We should all coordinate together and get this problem fixed

Posted on Sep 05, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Trow that tv on the garbage and by different one i have the same problem .brogth a power supply new $400 was working so god for 2 months .just got bad again waist of money

Posted on Jan 30, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You just need to replace the transistor top 224Y it is on the power supply board

Posted on Sep 27, 2007

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem. Talked to SVA, the part is the Power Supply board which costs $450.00 plus 30.00 to ship it.

Posted on Aug 23, 2007

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Its probably your power supply failing. Mine did the same thing after about a year and a half. Of course its out of warranty and the shops around town cant get the part, and theres virtually no way to get a hold of SVA. But good luck with it.

Posted on Jan 22, 2007

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tv turns on for 10 seconds and then turns off. Then a red flashing blinks 6 times and repeats


Search Results

    Samsung TV On/Off Issue - Repair - Instructables

    www.instructables.com/id/Samsung-TV-OnOff-Issue-Repair/

    InstructablesThe result of this issue is a TV that will cycle between on and off repeatedly and/or an annoying clicking noise while turning on. Time to get informed about the ...

    Easy fix for new Samsung TV switching on and off power ...

    ? 4:41
    https://www.youtube.com/watch?v=H0cG3lzjuw8
    Sep 15, 2012 - Uploaded by alwaysafix
    www.alwaysafix.com Find the correct TV part for your TV and more at ShopJimmy.com Click Here: http ...

    Samsung 46" LCD TV (LNT4665F) turns off and on over again - Forums ...

    www.cnet.com > Forums > Samsung

    CNETAbout 3-4 months ago, my TV would start turning off and on a few times at startup but eventually would stay on after a couple of minutes. Every once in a...

    Samsung TV turning off [Solved] - Samsung - Displays - Tom


Jan 19, 2016 | Televison & Video

1 Answer

Remote codes for uverse


If you want, you can do it auto program. Press the tv and enter button at same time one the lights stop flashing press the fast forward button untill the tv turns on or off whichever the opposite currently is. Once the tv turns on or off press thr enter button. If thr tv is now on try to work the volume. If the tv is off, try tufnung the tv in with the remotd. If the tv does neither yiu passed the code and need to repeat the process. I count the times I press the ff button so if I pass the code I can go fasger until I get to around where the tv turned on or off last time. his process works for most ddvices, some tvs may require pressing the ff button several hundred times to find the correct code.

Apr 28, 2014 | Samsung BDD5100 Player

1 Answer

TV keeps blinking off


Open it up and check power supply ( regulators ), could be capacitors ,

Check for
Flyback Transformer

and surrounding components.

Aug 15, 2012 | Zenith Televison & Video

1 Answer

Once off it wont turn on for a while


Hello,

The issue you describe is consistent with a power supply board issue. This is the board where the AC goes to. This problem may have occurred as a result of irregular power supply, or excess power supply or power surge.

The TV is receiving current but cannot circulate or transfer the current to other necessary part of the TV because of the defective power supply board. You might be lucky it's just a blow fuse. Also a defective transformer can cause your TV not to power on.

All these can be checked on the power supply board.

But more often bad capacitors causes problem on the power supply board. I do not think the power board needs replacement, rather those defective capacitors is causing this issue. Open unit up and take a look at the power supply board.You will probably see one or more electrolytic filter capacitors that are bulged up in the top-not perfectly flat like the others.

The value of these capacitors will be different, most likely they will be somewhere around-820 to 2200uF/25 V( or /10V sometimes)

You can replace them with same values but I would recommend the voltage rating to be higher(like 35V for an original 25V) for reliability purposes.

What happens is,these bulged top capacitors will cause a low and unfiltered DC voltage=main board will malfunction(the relay will keep clicking until the caps are holding enough charge to bring the voltage up over a threshold point).

You can buy these capacitors at any Fry's or Radioshack store or you can order them online at vendors like "mcmelectronics.com"(look for electrolytic capacitors). After replacing these capacitor(capacitors) most likely the normal operation will be restored. Or you can by a refurbished complete power board to save you some stress.

Note: There may be also some other causes for this symptom ,like a defective T con board ,or main board,but the bulged top capacitors are the most common cause for this issue.

If you don't know about TV repairers, take the TV to the nearest repairman to fix the fault for you. Also, note that TV stores a lot of current, so wait a while before opening the TV back cover.

I hope this helps.

Regards.

Nov 10, 2011 | Sony BRAVIA KDL-40V2500 40 in. LCD HDTV

1 Answer

I HAVE A ESA FLAT SCREEN TV AND I NEED THE MOST CURRENT CODES SO I CAN PROGRAM MY DISH NETWORK REMOTE , CAN YOU HELP ME PLEASE TV MODEL # IS PDP4294LV1


We currently have no codes listed for this brand try the steps below this is a process called a Power Scan it should resolve this for you.
Power Scan
1.) Hold down the clear "TV" button on the remote for four seconds, then press 500 pound ( #)
2.) Hold down the clear "TV" button on the remote for four seconds, press the big power button once.
3.) Press the channel up button once per second until the TV turns off then press pound (#).

Daniel Busa
DISH Network
Customer Service

May 30, 2011 | ESA PDP4294LV1 42 in. EDTV-Ready Plasma TV

1 Answer

Panasonic appears to be stuck in self check mode?? have tried turning television off at wall and leaving for an hour but still it does a scan then goes to a screen where it says self check complete. remote...


I had this issue twice and solved it once. The first time I had it I unplugged the TV and switched the batteries in my universal remote. By some miracle I was able to click ok and my TV worked again. However, I currently have the same issue but the solution I used to first time will not work. Any suggestions on how I can fix my TV?

Apr 15, 2011 | Panasonic Televison & Video

1 Answer

While setting up the Crest Universal remote control RCP1F for my sharp TV, I've managed to turn the TV off, but now I can't turn it back on. The TV remains on Standby and turning off the power doesn't do...


OKAY TRY THIS..
DO STEPS 1-3 AGAIN AND ONCE IT TURNS OFF KEEP CLICKING THE CURSOR UP A COUPLE TIMES.
THEN START CLICKING THE CURSOR DOWN SLOWLY TELL THE TV TURNS BACK ON AND ONCE IT CLICKS BACK ON HIT THE TV BUTTON ON THE TOP OF THE REMOTE ..
IF THE LIGHT BLINKS TWO OR THREE TIMES MORE THEN LIKELY YOU'VE PROGRAMED IT =)
AND NOW KICK BACK RELAX AND ENJOY A COLD BEER FOR THE BOTH OF US =)

Nov 18, 2010 | Televison & Video

1 Answer

Sony kv-32hs510 stand by blinks 6 times not abe to turn on the tv


It an over voltage or over current problem.....Turning the TV on and off or unplugging the TV may allow you to start the TV. Once started the TV may run for days until you turn it off.
The TV will require a new board to correct the problem...

Apr 05, 2009 | Sony FD Trinitron WEGA KV-34XBR800 34" TV

1 Answer

Panasonic pt-51g53w


Usually, in the Panasonic projection sets that start but then shut right back off, one of the convergence IC's has shorted out and is drawing too much current. When the TV is turned on, the computer senses the extra current and shuts the set back off. The set should be serviced by a qualified tech familiar with Pansaonic projection sets.

Aug 28, 2007 | Televison & Video

Not finding what you are looking for?
SVA-USA HD4208TIII-PDP 42 in. EDTV-Ready Plasma Television Logo

332 people viewed this question

Ask a Question

Usually answered in minutes!

Top SVA-USA Televison & Video Experts

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Michael Galve
Michael Galve

Level 3 Expert

1269 Answers

Marvin
Marvin

Level 3 Expert

83096 Answers

Are you a SVA-USA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...