Question about Durabrand DWT2704 TV

2 Answers

TV won't turn on

When using the remote or the on/off button on the tv, the light comes on red instead of green and no picture.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers
Re: TV won't turn on

Remote is fine have 2 tvs both 2704s remote only works on one tv whats wrong with the one tv. is it the eye how do u fix

Posted on Mar 28, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 3,130 Answers
Re: TV won't turn on

The red light instead of green is an indication that theres a voltage missing or an improper voltage in the sweep or main power supplys. This should be handled by a trained service tech. Good Luck

Posted on May 28, 2006

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

When we push the power button on the remote or on the tv the green light comes on for one second and then shuts off ... tv won't turn on

you have a short circuit in the power supply.
1) test the power cord very well
2) test the main swithc for short or open
3)test the power supply, look for a short in transformer+coil+filter+diode+rectifier. and replace
4)test the HVRECT+fLYBACK+ horizontal output for +125Vdc +vertical output for +80Vdc ALL this go to the CRT
color +12vdc+other circuit +12vdc. The first thing do you will have is RASTER, see the block. d
God bless you

Jul 31, 2012 | Mitsubishi WS-65819 TV

1 Answer

My tv has a red button on the front that flashes and no picture comes on when we try to turn it on with the remote

The Toshiba sets were well known for bad capacitors in the power supply. I recommend getting it assessed.

Mar 19, 2012 | Toshiba 32AX60 32" TV

2 Answers

My Loewe Aconda TV will not turn on - buzzing noise.

My Loewe Aconda 81 HDR TV will not turn on. When I press the power button the green light comes on but the red light stays on with it and after a few seconds the green light goes out and the red light stays on. Any help please.

May 15, 2010 | Loewe Aconda ACO9383 38" TV

1 Answer

Need the code to set the technika remote to ma toshiba telly

Maybe you could try the auto-set. Found this using google:
Auto code search

1. switch on the TV and select a channel eg. Bbc1 on the TV itself
2. press the appropriate device button eg. TV
3. press the green SET button for approx 5 seconds until the red light comes on.
4. release the green SET button and point the remote at the device to be controlled, the remote will emit a test signal about every 2 seconds.
5. when the TV switches itself off briefly press the green SET button to store the code found.
6. when the red light goes out the search is ended.
7. try out the remote if it works follow the same steps to set it to other devices eg. DVD. If it does not work follow the steps again.
cover other remote sensors on other devices when setting the remote.

Apr 01, 2010 | Standard (CRT) Televisions

2 Answers

My JVC 27" can not be turned on or off with the remote or the on an off button. Any ideas?

try all in one remote/it can be the infrared on tv not picking up signal/point remote does light flash on tv ?

Dec 23, 2009 | JVC AV-27530 27" TV

2 Answers

Tv wont turn on

take your tv to technician who can check your power supply, if your power is coming on and off, than a problem is not as big. firstly let him check a ht of a supply constantly, your supply is cutting.

Nov 03, 2008 | Panasonic CT-32SC13 32" TV

1 Answer

Sky code for remote

The code for you sky remote is 0125.

4 digit' method

1. Turn on your TV.

2. Press tv on your Sky remote control.

3. Hold down select and the red button together for about two seconds, until the red light on the Sky remote control blinks twice.

4. Press tv on your Sky remote control again.

5. Key in the Brand Set code for your brand of TV then press select. The light on the Sky remote control blinks twice.
If the light blinks once only, re check the code for your TV and start again at step 1.

6. Press the on/off button (power-top right button on your Sky remote control).

If your TV switched off, press select . The light on the Sky remote control blinks twice.

If your TV did not switch off, press tv , then press the on/off button. Repeat this (press tv , then on/off) until your TV turns off, then press select.

If the light on your Sky remote control blinks three times, your Sky digibox has checked all the possible settings for the code you used. Check that you have the right 4 digit code and start again at step 1.

7. Press tv guide .
If you see the TV Guide screen, the remote control setup process is complete.

If you did not see the TV Guide,you must now set the TV Guide function as follows:

8. Press tv on your Sky remote control.

9. Hold down select and the green button together for about two seconds, until the red light on the Sky remote control blinks twice.

10. Key in the number of the channel on your TV that you use for watching satellite TV (For scart switching, this may be one of the other buttons on your remote e.g. help, i or a colour button).

11. Press select on your Sky remote control. The red light blinks twice. The remote control setup process is complete.

Feb 13, 2008 | Standard (CRT) Televisions

1 Answer

Red light on, no picture

Cause: IK04,IK05,I601,C614

Jan 13, 2008 | Hitachi 43FDX01B TV

Not finding what you are looking for?
Standard (CRT) Televisions Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Durabrand Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66623 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Durabrand Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides