Question about Mitsubishi WD-62525 62" Rear Projection HDTV

1 Answer

How to replace Bad Capacitors on a Mitsubishi WD-62525?

I need help PLEASE!!!!. I am trying to troubleshoot my TV. I just replaced the lamp suspecting that was the cause of blue screen with white round cloud in the middle. Based on some of forums I read, replacing buldging caps on the power board might solve the problem. I've opened the rear of the TV and stuck with how to get to the power board. Please give expert opinion and instruction on how to get to the power board. I appreciate any help you can give.
Thanks in advance.
Dyabs (dyabs92-ads@yahoo.com(

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 18 Answers

#1 press menu on mitsubishi remote control.If the white round cloud don't go.
you need to replaced block optical......light engine

Posted on Sep 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Mitsubishi Projection TV Model WD-62525 screen has pinkish lines running through the screen. The lamp has been replaced. What could it be?


not the lamp. Its a known issue with the power supply. Bad capacitors usually. this requires a servicer to repair it.

Sep 17, 2015 | Mitsubishi WD Projection Televisions

1 Answer

I have a mitsubishi wd-62525 the power light keeps blinking, and i can't get picture. i unpluge it than want 2min than it stop blinking and i can turn to tv on and get a picture than after 30-40mi


Good day!!!!


That problem is usually cause of faulty capacitors on the power supply board..

Just follow this instruction to fix your TV..

1. Open the back cover of your TV.
2. Look at the power supply board..Its normally connected to the power cord..
3. After that,,try to look at the actual image of capacitors if it is bulged on the top so that you can easily determine the bad capacitors..
4. After that,,try to replaced the bad capacitors using soldering iron and soldering lead..replaced the capacitors only with the same type ratings and value..
5. Some of the capacitors not bulged so its better if have a capacitance meter

Jun 06, 2012 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

My tv went off an red light is blinkin


The red light indicates that the lamp has failed to light. You need a new lamp or the capacitors on PWB-Power need to be replaced. Try getting a new lamp first.

Jan 16, 2011 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

Tv starts to turn on then red light comes on and tv turns off


The red light indicates the lamp has has failed to light. You might just need a new lamp. If replacing the lamp does not solve your problem then the capacitors on PWB-Power need to be replaced or the lamp ballast itself has gone bad.

Dec 25, 2010 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

I have WD 62525 timer blinks very rapidl but wont turn on or off


HOwdy;
Try unplugging TV from a/c for 2- 3 minutes. Plug back in, turn TV on. If red light turns on (Lamp may light and go out) suspect bad lamp part # 915P020010.

Good Luck, Big Irish.

Nov 22, 2009 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

Mitsubishi wd-62525 sound will come on but no picture.


Your tv would turn on if you replace the only two 3300µf@16v capacitors on the power board . You wil notice they are bad by the way they bulge up at the top and may be leaking electrolyte a little from the tops . But the rolling lines would still remain but much less noticable.Then other symptoms will eventually appear. Truth is many many many many other capacitors need to be replaced inside the electrical chassis. Your TV would need to go to a repair shop that is expierienced in that repair because it is so extensive.

Oct 06, 2009 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

Tv totally black, with the red light of lamp on.


sounds like the 34 error which is caused by the power board capacitors. you can get the repair kit that should repair that issue. The kit contains the replacement capacitors and step by step instructions. Heres a link to the repair kit for your model.
http://servicemanuals.vstore.ca/product_info.php/pName/mitsubishi-v26-dlp-power-pwb-repair-kit/cName/repair-kits

Jul 06, 2009 | Mitsubishi WD-62525 62" Rear Projection...

2 Answers

Timer light did not stop flash


Lamp is not the issue. It most likely is a your DM card. You most likely have some capacitors that need to be replaced. This is a terrible issue with this unit. Do a google search for "DM" and the model number and you should see hundreds of posts.

Jul 02, 2009 | Mitsubishi WD-62525 62" Rear Projection...

3 Answers

Mitsubishi tv


ok.
#1. replaced capacitors on power board. DM board FMT board .
# 2 on power board you need to chek caps. 3300mf x 35 v.QTY 2.
# 3 12 capacitor 1000mf x 16 v.
If caps 1000mf x 16 v . looked good. replaced anyway......

Sep 14, 2008 | Mitsubishi WD-62525 62" Rear Projection...

Not finding what you are looking for?
Mitsubishi WD-62525 62" Rear Projection HDTV Logo

866 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1191 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68368 Answers

Are you a Mitsubishi Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...