My xerox copy centre c128 is showing error fault 072-210

SOURCE: Xerox Copier C128 showing Fault

That is a finisher stack height sensor fault. It has not reset when the tray started to lower.
Most commonly that sensor has an arm on it, it will often times fall off. Look around the finisher, on the floor and under the machine for a black part, maybe 2 inches long. Skinny. It is an odd shapped part. It would be sticking out onto the tray, in the middle. It may just be stuck. but my bet is that it has fallen off.

SOURCE: How do I program fax #'s into my machine

Download the user manual from Xerox's website.

I’m happy to help further over the phone at https://www.6ya.com/expert/jayw_0e86fb055a7b73de

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...

SOURCE: My Xerox Copy centre C123 shows error code 124-315

Thats a weird one. The machine is detecting the wrong speeds.
Try this.

1. Enter Diagnostic Mode ( UI Diagnostic Mode).
2. At the Control Panel, press and hold the 0 key for 5 seconds, then press the Start button while still pressing the 0 key.
   
3. Press buttons 6, 7, 8, and 9 on keypad and press Confirm.
   
4. Press the Log In/Out button (button with Key symbol) on the Control Panel.
   
5. Select System Settings.
   
6. Select Common Settings.
   
7. Select Maintenance/Diagnostics.
   

• [700-600]
  
• [700-601]
  
• [700-602]
  

Testimonial: "Thankyou,and need more help. chose NVM read/write & enter value700-600, it shows 65000 current value what should i enter as new value?"

Patrick Carmichael of MRC

• 107 Answers
• Posted on May 29, 2011

SOURCE: Xerox CopyCentre C128 Black and

Solution : Power the Machine OFF and ON CAUTION: Wait at least 30 seconds between powering the machine OFF and powering the machine ON. Damage to the optional hard disk could occur.

1. Press the power switch to the OFF (O) position.

NOTE: If the machine is equipped with the optional hard disk, the machine remains on for approximately 10 seconds, while storingfiles and preparing for shutdown. The machine then shuts down completely.


2. Press the power switch to the ON position.

Patrick Carmichael of MRC

• 107 Answers
• Posted on May 29, 2011

SOURCE: my xeros copy centre c128

You can always find your answers at www.xerox.com./support
Two solutions to try: Related Fault Codes: 047-212, 047-211 Related Fault Codes: 071-210, 072-210, 073-210, 074-210

1. Power the Machine OFF and ON
2. Check For Paper Behind the Paper Tray