Question about Pioneer Projection Televisions

1 Answer

I have a pioneer elite plasma (Pro-1540HD),and my color settings are completely screwed up.(my kids and father-in-law were messing around with my remote.). I've gone through the manual and done everyhting suggested in there with no success. I've been on hold with Pioneer Support for hours, and now I am completely frustrated. I have lots of blue/yellows, but very little greens and no reds. I've tried to adjust these based on the controls from the on screen menu and nothing helps. How can I get my TV back to normal? I've even reset everything to the factory settings and tried it again, with no luck.. Thanks, Grant 720-234-3119 Gnesbitt@homebroker.net

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 59 Answers

Start with page 51 in the manual, disconnect all external sources(vcr,dvr,cable box,etc.) start the tv with just the cable from the wall jack straight to the tv. make adjustments as needed.when you have a satisfactory picture, reconnect the external sources one at a time and see if the picture changes after the addition of each component, if it does, the problem is probably that component. good luck.
Marc

Posted on Sep 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello how do i set the convergence manualy on a pioneer elite pro-710hd projection tv i dont have the remote and dont know how to bring the menue up on the tv


You MUST have the remote to perform service operations on the Elites. Look on ebay or do a google search for Pioneer 710 remote.
There is no way to manually do convergence without a remote, and no way to call up the convergence menu.

Feb 05, 2014 | Pioneer PRO-710HD 64" Rear Projection...

1 Answer

NEED OPERATING MANUAL FOR PIONEER ELITE PRO 530 HD TV


both may be a little hard to find anymore, the main problem is dead set and that is bad soldering all over the giant power supply board this set uses.

Sep 02, 2012 | Pioneer PRO-530HD 53" Rear Projection...

1 Answer

It has blue and green arc colors showing up with duplicate words at the lowest part of the screen-just showed up yesterday It is a Pioneer Elite projection monitor receiver PRO-710HD


Replace Both of Your STK ICs They are Big Black ICs will have STK392-110 on them upgrade ICs to 120s-150s,or 180s Call Mat Electronics for parts
1-800-628-1118 ICs will be on the Left hand side of Chassis Mounted on The very First board,there are screws holding board on Fame/ board also plugs in bottom of chassis.

Jan 21, 2010 | Pioneer PRO-710HD 64" Rear Projection...

1 Answer

Color alignment kpwt500 tv


i would have a shop reconverge it.thats going to be the easiest way to get the picture back the way it should be.

Jan 13, 2009 | Sony KP-46WT500 46" Rear Projection...

1 Answer

Pioneer elite pro 100


My set is doing the same thing again. The last time I fixed this (4 years ago) it was a capacitor gone bad in the power supply for the 24v standby circuit. (C166)
The service manuals can be ordered directly from Pioneer Part Number ARP3014 for Pro-100 model.

Apr 10, 2008 | Pioneer PRO-100 TV

3 Answers

"TV Not Turning On"


Hey im not one of the techy guys with tv's im a computer guy.
but i have that same pioneer set you have the 510-HD and i had a similar if not the same problem.
my ex-father in law is a tv repair guy he told me to resolder the power board connections that looked corroded. i did just that and problem solved. hope this helps you out
FYI make sure you use rosin core solder not acid core good luck

Nov 27, 2007 | Pioneer PRO-510HD 53" Rear Projection...

1 Answer

PRO-510HDTV



The intermittencies you mention are common on this
series. The PS - power supply - board needs a
virtually complete resolder op, as the solder used in
that run of units was weak and thin. It will not get
better on its own, any more than needed dental work
will.

Send it to me and I will resolder it and send it back.
I have done so on a number of PS boards in this series,
and am running at 100% success on saving the
510/610/710 series of Pioneer Elites when all they need
is the resoldering op. There is a procedure to follow,
so contact me directly.

www.imageperfection.com
510-278-4247

Mr Bob

Nov 08, 2007 | Pioneer PRO-510HD 53" Rear Projection...

1 Answer

Pioneer Pro-200 60" Rear Projection Color Adjustment


after market duplicate remotes are reasonably priced-search tv remotes on-line.

Sep 26, 2007 | Pioneer PRO-200 60" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

yadayada
yadayada

Level 3 Expert

61249 Answers

zorbrack

Level 1 Expert

19 Answers

Are you a Pioneer Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...