SOURCE: cannot find driver for jvc GR-D720 Mini Dv digital camera please help!
If it's a JVC GR-D72, then it's MiniDV. Connect the camcorder via firewire to your PC
SOURCE: JVC GR DVL 9000 digital video camera EO3 problem?
In the case no REEL FG is produced for 4 seconds
or more in the capstan rotation mode after
loading was complete, the mechanism mode
is shifted to STOP with the pinch roller set off.
This error is defined as [E03].
However, no REEL EMG is detected in the
SLOW/STILL mode.
1. The idler gear does not engage with the reel disk well.
2. Though the idler gear and reel disk are engaged with
each other, the tape is not wound because of overload
to the mechanism.
3. No FG pulse is output from the reel sensor.
4. No power is supplied to the reel sensor.
5. Tape transport operation takes place with a cassette
having no tape inside.
6. The tape slackens and no pulse is produced until the
slack is taken up and the tape comes into the normal
status.
SOURCE: jvc gr-d50aa driver
hi dear
just using card fire wire
and transfer it with
software like: , pinacle, Ulead Video Editor, adobe premiere ...sony
vegas ...cyberlink power director.and many moore
oke
cropp
SOURCE: INSTALLATION OF SOFTWARE FOR WINDOWSXP TO CONNECT GR-DX75 DIGITAL CAMERA
Use jvc.de to download software:
http://de.jvc-service.net/public/document.cfm?prog=ProdSoft.cfm&Model=GR-DX75
47 views
Usually answered in minutes!
×